All my settings are correct. I have correct paper selected (borderless). All sliders are at ZERO. Aspect ratio of picture is correct. Correct ICC profiles are installed. THIS IS CLEARLY A LIGHTROOM ISSUE! I can print perfectly using Canon's supplied software.
Macbook Pro (new)
Canon Pro-100 Printer
I wanted to create an A4 borderless print in my canon mg6150 from within the print module. I can do a borderless print using the canon easyprint.
I go into page setup and the properties of my printer and set the page layout to borderless and click OK.
However, I am unable to set the margins to zero. When I go back into my page setup and check the page layout, it has reverted to normal so it has ignored my setting.
I've been experiencing a problem when printing borderless on with LR4. Although I'm using borderless print settings, all margins are 0 and cell size is 4x6 or 8x10 or whatever it needs to be, the bottom edge of all photos has a 1-2mm line of unprinted paper.
This is also visible on the print preview of LR4, as you can see on the bottom of the attached image.
I have been trying to make business cards in Lightroom 4. Everything works fine except no matter how I set things up my 2 X 3.5 inch photos print at 3 11/16 X 2 1/8 inch. My printer is set to print borderless 4 X 6. My settings under Custom Package are as in the screenshot below.
View 1 Replies View RelatedI have 4 x 6 papers with rounded corners and I want to print on these papers borderlessly.
I choose 4 x 6 paper size in Lr and borderless option clicked in the Epson driver.
In this case, some drops of inks can not fall on the paper (at the rounded corners).
Is this case harmful for the printer?
If so, how should I print borderlessly from Lr on papers with rounded corners?
Upgraded OS from W7 (64bit) to W8.
Using Canon Pro 9000 Mk2 printer, unable to select and print borderless prints of any size.
However, using Elements 11, there is no problem which suggest the problem is confined to LR4.3.
Have uninstalled and reinstalled the driver w/o success.
How to print A3 size borderless portrait using Epson R1500W. I've got this printer 2 days ago and still can not figure aout how to do it. I've got few mm blank in either side of length wise.
View 3 Replies View RelatedI have PSE 9. HP 5514 printer. I can print photos borderless through Windows, but not through PSE. In PSE, I have unchecked the box for Border, have checked the Crop to Fit box and Center Image box (and every possible combination thereof). My photo has been sized to 4"x6" in PSE, and I have checked all boxes in the print dialogue for 4"x6". I get a border no matter what I do.
View 1 Replies View RelatedHow do i print borderless pictures using elements 10
View 3 Replies View RelatedRight after updating to 3.6 I started having printer problems on my Canon Pro9000. No matter what size I print, all the prints are seriously misaligned. When using any other program I don't have this problem (Just Lightroom Only). Is there a way to go back to the previous version which I think was 3.3 or is there a fix for this?
View 5 Replies View RelatedWhat do I have to do to print borderless photos on a LaserJet Pro 200 M251 nw printer?
View 2 Replies View RelatedUnable to print from Lightroom to my Canon Pro9000 Mark II Printer, I get an error code 1062.
View 1 Replies View RelatedWhen trying to print borderless the menu reverts to the smaller size. ie when selecting 5x7 it reverts to 4x6. Ditto 8x10 and 11x14 etc. The paper size stays the same, just the print size reverts and the desired size disappears. I contacted Epson twice and both times I was told it is a software issue, not the printer. The same thing happens in Lightroom, but in WEindows Gallery Live the printer works correctly which indicates the driver and printer are working correctly. I am using Windows 7 and had Elements 9, but Elements 10 came bundled with the printer so I upgraded to 10, no improvement.
View 5 Replies View RelatedI am printing to Epson R3000 with LR managing the colour management. I can't get the borders to zero in the print module and have a small boarder of a few millimetres on a one cell print.
View 3 Replies View RelatedOK. So how do I print a 4x6 borderless print on my new 7510 Photosmart? My only options seem to be a 4x6 tab print. What gives?
View 7 Replies View RelatedIs there a profile for Canon lenses 8-15 mm and Canon 800mm ? Where can it be found ?
View 2 Replies View RelatedWhen trying for borderless A4 prints there is always a small border on the top and right hand edge of the resulting print.
This only happens when using LR.I am printing to a Kodak c310 printer.
Will Lightroom allow tethering with Canon T3i and Canon T4i ?
View 2 Replies View RelatedI'm looking for a way to print CDs (to Canon ip8500 and ip4300 printers) directly from Photoshop. I'm on x64 where Canon's CD Lable-print won't run, besides which I'd much prefer to print from Photoshop anyway. Is there a plug-in, a work round, a clever trick?
View 6 Replies View RelatedDraw X5 and Photo-Paint X5 won't print color on Canon iX6500. The print preview is B&W when it should be color and the print is B&W. The printer will print color just fine through any other application with the same printer setup settings. My old Canon ip 4300 will print color through both Corel X5s - no problem. the printer was installed after installing X5 if that matters. I'm thinking about uninstalling and reinstalling the software.
View 4 Replies View RelatedI've been a long term Photoshop (elements) user, but rarely use it. I primarily use Aperture. I have a shot that I've printed successfully in 20 X 20 on aluminum and would like my next print to be bigger, 30 X 30 would be ideal.
I have a JPG Aperture export that measures 2318 X 2318 pixels. I was talking to a person at an art show this weekend, discussing my goal for this photo and he mentioned a feature of Photoshop that can take this image and basically adds more pixels. It's a 3 second motion shot in low light, so I'm not too worried about losing sharpness.
Here is a 1024 X 1024 export of the photo.
I use a bog standard canon A480 for all of my photographs, it's a good little camera and does what i want it to do. My question is this, it is set to give a image of 3648x2736 i want to reprint some photographs of the kids on the beach, what sizes would you recommend for output sizes for printing etc.
View 4 Replies View RelatedI am trying to publish a set of four drawings to a Canon ipf750. I want to make two collated sets. So far I can't get any plot at all.
View 6 Replies View RelatedI have stiched together six photos to make a panorama photo. When I go to print that combination photo only one of the six photo shows up in the Print window. Only one photo is printed, not the panorama one. I tried using the Finder > Print box and the copy of the panorama photo I had in a folder on the my desktop. That worked. I want to use photo paper for the print and make some adjustments, that doesn't work from the Finder > Print selection. The original panorama photo was a TIFF file and ended up to be 155MB, but I made a copy in JPEG and that file was 13.2MB.
View 3 Replies View RelatedCS3 / XP Home. I am trying to print a 7 by 10 in image using my old Canon BJ200 printer. On Page Setup the right margin always default to 2.5 in,despite repeatly input to defferent numbers. I've lowered the image to 300dpi with no effect on print setting.What can I do?
View 4 Replies View Relatedhow to print a color seperation with half tone using photoshop cs6 or cloud suite with a canon mp970 printer with no postcript function
View 1 Replies View RelatedI have a question about plotting at Canon plotter (Canon imagePROGRAF iPF750) with possible has feature to plot as a drawn area.
Simply say I want to specified only one custom/roll paper size, make it custom size as a default. After that I want to plot exactly the accurate drawn area from my dwg. So with this settings I cannot specified custom paper size for each unique dwg.
For example I'm using this settings with another plotting device -- Xerox WF (picture to see the chosen settings) and working like a charm.
In LR4 print module the print and print one tabs are greyed out and I can't reset.
View 1 Replies View RelatedAll was working OK and the printer is showing ink cartridges almost full In the Library Module the print review is fine.
Switch to Print Module and the print review is now blank (100% white)
Pictures no longer print
Windows 7
Espon Artisan 835 printer
LR5.3
I have just bought and installed Lightroom 5 and need to set my print size to A3 and in the future even bigger. I do not have the facility at home and need to have them sized correctly for the print shop so they do not have to waste time resizing them. I am at a loss how to do this. I cant find any settings for this size print. A3 is roughly 42 x 29.7 cm.
View 2 Replies View RelatedI am fairly new to Photoshop Elements 3.0. Can someone tell me how I can print a photo WITHOUT the border around it? I want it borderless.
View 2 Replies View Related