Draw X5 and Photo-Paint X5 won't print color on Canon iX6500. The print preview is B&W when it should be color and the print is B&W. The printer will print color just fine through any other application with the same printer setup settings. My old Canon ip 4300 will print color through both Corel X5s - no problem. the printer was installed after installing X5 if that matters. I'm thinking about uninstalling and reinstalling the software.
I wanted to create an A4 borderless print in my canon mg6150 from within the print module. I can do a borderless print using the canon easyprint.
I go into page setup and the properties of my printer and set the page layout to borderless and click OK.
However, I am unable to set the margins to zero. When I go back into my page setup and check the page layout, it has reverted to normal so it has ignored my setting.
I can't convince my Corel Draw X6 to print in color. Even the print preview is in B&W. I've been using Draw since version 8 and I never encountered this problem before. Do I reinstall my printer's driver? I upgraded to X6 only recently - did I miss something in printing setup?
I've been struggling with the color management in CorelDraw X5 for awhile. I usually just design blind and check the print out or exported images after the fact to see if they're how I initially intended. The image above is exactly how the design looks in Draw.
This next image is how it looks when I print it out or when I export it to a JPG or PSD or other bitmap.
I've been researching for awhile on the color management and have tried many many varieties. I'm still not sure what the deal is. If it was my monitor or drivers I don't think I would be getting the result I want after I export the image, although I haven't tried updating the driver yet.
Context - I am brand new to the graphic design business and working with a friend to create a logo for their new business. The logo will be used for web and print purposes.
I am having an issue where the colors used while in the CorelDraw application are not matching the exported files or what comes off the printer. Printer - HP officejet 6500 - using this for a checkpoint only, will not use for actual printing
I created the logo using CMYK color palette and used the default settings in Corel as far as color management goes...It is U.S. Web Coated (SWOP) v2. The application is still in an "out of the box" state as I am too new to know how to change anything.
So, that said...the image looks great in the application. I exported several proof files for my friend, but see now that I used RGB for the export. He loves the design and I am ready to deliver his files. Those RGB files "look" fine when opened as jpeg or png, but when printed they are completely different.
I've read that it is important to deliver CMYK files as well as RGB files. So, I attempted to export with that color style thinking it might fix that problem, since I created the image using that palette. When I try to export using CMYK though, the color goes absolutely whacko. Viewing on the computer, the muted green (20.0.60.20) turns into a neon green...and it prints that way as well.
I know computer monitors have variations, but if I see it in the application one way, viewing the exported file on the same computer monitor shouldn't pose an issue.
I'm looking for a way to print CDs (to Canon ip8500 and ip4300 printers) directly from Photoshop. I'm on x64 where Canon's CD Lable-print won't run, besides which I'd much prefer to print from Photoshop anyway. Is there a plug-in, a work round, a clever trick?
All my settings are correct. I have correct paper selected (borderless). All sliders are at ZERO. Aspect ratio of picture is correct. Correct ICC profiles are installed. THIS IS CLEARLY A LIGHTROOM ISSUE! I can print perfectly using Canon's supplied software.
Right after updating to 3.6 I started having printer problems on my Canon Pro9000. No matter what size I print, all the prints are seriously misaligned. When using any other program I don't have this problem (Just Lightroom Only). Is there a way to go back to the previous version which I think was 3.3 or is there a fix for this?
I've been a long term Photoshop (elements) user, but rarely use it. I primarily use Aperture. I have a shot that I've printed successfully in 20 X 20 on aluminum and would like my next print to be bigger, 30 X 30 would be ideal.
I have a JPG Aperture export that measures 2318 X 2318 pixels. I was talking to a person at an art show this weekend, discussing my goal for this photo and he mentioned a feature of Photoshop that can take this image and basically adds more pixels. It's a 3 second motion shot in low light, so I'm not too worried about losing sharpness.
I use a bog standard canon A480 for all of my photographs, it's a good little camera and does what i want it to do. My question is this, it is set to give a image of 3648x2736 i want to reprint some photographs of the kids on the beach, what sizes would you recommend for output sizes for printing etc.
I have stiched together six photos to make a panorama photo. When I go to print that combination photo only one of the six photo shows up in the Print window. Only one photo is printed, not the panorama one. I tried using the Finder > Print box and the copy of the panorama photo I had in a folder on the my desktop. That worked. I want to use photo paper for the print and make some adjustments, that doesn't work from the Finder > Print selection. The original panorama photo was a TIFF file and ended up to be 155MB, but I made a copy in JPEG and that file was 13.2MB.
CS3 / XP Home. I am trying to print a 7 by 10 in image using my old Canon BJ200 printer. On Page Setup the right margin always default to 2.5 in,despite repeatly input to defferent numbers. I've lowered the image to 300dpi with no effect on print setting.What can I do?
I have a question about plotting at Canon plotter (Canon imagePROGRAF iPF750) with possible has feature to plot as a drawn area.
Simply say I want to specified only one custom/roll paper size, make it custom size as a default. After that I want to plot exactly the accurate drawn area from my dwg. So with this settings I cannot specified custom paper size for each unique dwg.
For example I'm using this settings with another plotting device -- Xerox WF (picture to see the chosen settings) and working like a charm.
I'm having an issue with Autocad LT 2010 where when I xref in my title block which has our company logo in color, the logo will only print in black and white. If i open just the title block and print it, it will then print in color. I only seem to have this problem when the title block is xref'd in. I downloaded the 2012 demo version of AutoCadLT and it prints just fine?This has just started happening when my computer was upgraded to Windows 7 64 bit.
I'm having trouble importing RAW (.CR2) files taken with my Canon T1i into PhotoPaint X4. I am able to do it successfully with my NikonD90, but when I import from the Canon, the image is all purple and black. I just downloaded and installed the latest Canon RAW codec.
Is there a way to apply a color to selected objects without having to search for the color in the color palette. So say if I am working with an image that has multiple colors but want to use only one of the colors in that image, is there a way to apply it without having to create or add it to the palette.
I was wondering what is the best way to save a photoshop file such as a business card or stationary labels so they "KEEP" their color you see on screen.
I am already building in CMYK mode. My Client has a nice gray scale scheme but I am worried that the print shop will mess up the colors.
How do I create a custom set of colors and adhere to that scheme throughout the clients stationary and media. ie. Cards, Labels, Signs, etc.
Is there an option to print a color scale along with the image, sorta like when you calibrate your printer?
I still use Corel Draw 12 and my question is is there an easy or automatic way to make the outline color of an object the same color as the fill color? I do it the hard way of trial and error until I get the right outline color from the color dock/pallette.
Set the Trace Bitmap so that the outline color defaults to the same as the fill color on the resulting curves? Currently, resulting curves have to be edited one color at a time to give them hairline outlines with the same color as the fill. It's mighty tedious for complex vector art.
I'm having a major issue here, I use custom colors (created in my custom palette), X^ used to hold it very nicely, even in PDF exports etc.
Now - with the latest update, X6 "forgets" the custom colors, it resets it to default color, I have to manually set every object to the custom color all over again.
We print out spot color seps every day using CorelDraw X4. After we print out the plates, I have to cut down the vellum that we print on so that we do not have a bunch of extra blank vellum on the sheet.
We make use of the info that is printed on the lower left of every page where it states something like the following:
S:DirectoryWhereTheArtworkisLocatedfilename.cdr
Wednesday, December 23, 2011 8:00 AM
Plate: 1 of 3
After I cut down the sheet, I then have to hand write the name of the spot color onto the sheet of vellum in marker.
Is there any way at all, to make it so that CorelDraw would actually add the name of the spot color that is printed on each page to the information that is already being printed to the lower left? Ideally, it could be placed in the same area where it's already printing the plate information on the last line.
