Right after updating to 3.6 I started having printer problems on my Canon Pro9000. No matter what size I print, all the prints are seriously misaligned. When using any other program I don't have this problem (Just Lightroom Only). Is there a way to go back to the previous version which I think was 3.3 or is there a fix for this?
View 5 RepliesUnable to print from Lightroom to my Canon Pro9000 Mark II Printer, I get an error code 1062.
View 1 Replies View RelatedIn the Print area, Lightroom 4 says in italics at the bottom to turn off the colour management in the Print Dialog if you're chosing to print with a profile.
how to do this with my Canon Pro9000 mk2 via OSX Lion 10.7?
I get good colour reproduction from my Canonn Pixma Pro9000 printer with Photoshop managing colour. However when using the XPS driver version (which should give finer gradation of colour), this is not the case. I have been told by Canon that this is because the driver in Photoshop is the basic one, and that I should find the XPS driver on the Adobe site and download it. However, I have been unable to find the driver.
View 3 Replies View RelatedI wanted to create an A4 borderless print in my canon mg6150 from within the print module. I can do a borderless print using the canon easyprint.
I go into page setup and the properties of my printer and set the page layout to borderless and click OK.
However, I am unable to set the margins to zero. When I go back into my page setup and check the page layout, it has reverted to normal so it has ignored my setting.
All my settings are correct. I have correct paper selected (borderless). All sliders are at ZERO. Aspect ratio of picture is correct. Correct ICC profiles are installed. THIS IS CLEARLY A LIGHTROOM ISSUE! I can print perfectly using Canon's supplied software.
Macbook Pro (new)
Canon Pro-100 Printer
Is there a profile for Canon lenses 8-15 mm and Canon 800mm ? Where can it be found ?
View 2 Replies View RelatedWill Lightroom allow tethering with Canon T3i and Canon T4i ?
View 2 Replies View RelatedI'm looking for a way to print CDs (to Canon ip8500 and ip4300 printers) directly from Photoshop. I'm on x64 where Canon's CD Lable-print won't run, besides which I'd much prefer to print from Photoshop anyway. Is there a plug-in, a work round, a clever trick?
View 6 Replies View RelatedDraw X5 and Photo-Paint X5 won't print color on Canon iX6500. The print preview is B&W when it should be color and the print is B&W. The printer will print color just fine through any other application with the same printer setup settings. My old Canon ip 4300 will print color through both Corel X5s - no problem. the printer was installed after installing X5 if that matters. I'm thinking about uninstalling and reinstalling the software.
View 4 Replies View RelatedI've been a long term Photoshop (elements) user, but rarely use it. I primarily use Aperture. I have a shot that I've printed successfully in 20 X 20 on aluminum and would like my next print to be bigger, 30 X 30 would be ideal.
I have a JPG Aperture export that measures 2318 X 2318 pixels. I was talking to a person at an art show this weekend, discussing my goal for this photo and he mentioned a feature of Photoshop that can take this image and basically adds more pixels. It's a 3 second motion shot in low light, so I'm not too worried about losing sharpness.
Here is a 1024 X 1024 export of the photo.
I use a bog standard canon A480 for all of my photographs, it's a good little camera and does what i want it to do. My question is this, it is set to give a image of 3648x2736 i want to reprint some photographs of the kids on the beach, what sizes would you recommend for output sizes for printing etc.
View 4 Replies View RelatedI am trying to publish a set of four drawings to a Canon ipf750. I want to make two collated sets. So far I can't get any plot at all.
View 6 Replies View RelatedI have stiched together six photos to make a panorama photo. When I go to print that combination photo only one of the six photo shows up in the Print window. Only one photo is printed, not the panorama one. I tried using the Finder > Print box and the copy of the panorama photo I had in a folder on the my desktop. That worked. I want to use photo paper for the print and make some adjustments, that doesn't work from the Finder > Print selection. The original panorama photo was a TIFF file and ended up to be 155MB, but I made a copy in JPEG and that file was 13.2MB.
View 3 Replies View RelatedCS3 / XP Home. I am trying to print a 7 by 10 in image using my old Canon BJ200 printer. On Page Setup the right margin always default to 2.5 in,despite repeatly input to defferent numbers. I've lowered the image to 300dpi with no effect on print setting.What can I do?
View 4 Replies View Relatedhow to print a color seperation with half tone using photoshop cs6 or cloud suite with a canon mp970 printer with no postcript function
View 1 Replies View RelatedI have a question about plotting at Canon plotter (Canon imagePROGRAF iPF750) with possible has feature to plot as a drawn area.
Simply say I want to specified only one custom/roll paper size, make it custom size as a default. After that I want to plot exactly the accurate drawn area from my dwg. So with this settings I cannot specified custom paper size for each unique dwg.
For example I'm using this settings with another plotting device -- Xerox WF (picture to see the chosen settings) and working like a charm.
When I enter text in a text box it appears with the baseline of the type above and on the top edge of the text box. If I start with an uppercase letter it overprints the second letter in the series. The character window seems to be in order with all the spacing and leading properly identified. Have tried a reinstall to no avail. Using Windows 7 and PhotoShop8. This just stared happening it had worked properly for a long time.
View 3 Replies View RelatedWhenever I add title text which appears to be perfectly centered in the editor, some of it disappears to the right after rendering. To fix this I have to guess how far to the left I enter the text in the editor so it doesnt disappear. Is there some option which would allow me to enter text and have it appear as I enter it? The text is over the background of a colour and I suspect it doesnt like the fact that I am outputting the result as 16:9 which I thought vs pro x2 can handle.
View 14 Replies View RelatedWhen saving as in photoshop CS6 on a mac pro Lion 10.7.4 The File format are inncorect I save as a tiff and get sct I have to save as Photoshop DCS1.0 to get a tiff file If there are a wider range of file formats available when saving an rgb formattted image it is some times very difficult to work out which option to choose presently saving everything as psd as it is simpler.
Also when opening files, the enable selection box is alway set to a blank and i have to scroll down to the last two option to get "all readerble documents" or "all documents" I have added the odd file formatt they seeme to work fine but could i assume be casusing an issue.
File Formats:
AdobePSDXFileLoader.plugin
ICOFormat.plugin
JPEG2000.plugin
PBM.plugin
PCX.plugin
[code]...
Problem in my Inventor Fusion: as shown in the attached image, when I try to move a feature in my model, the X axis in the 3D Move/Rotate tool is not parallel with the true X axis of the model. I don't know how it got like that, but I would very much like to change it back.
View 2 Replies View RelatedGranted this is a minor issue, but when Revit 2013 is opened, before actually opening a project file, if I click the add-ins or some of the other menus, they don't appear in the right spot. See attachment as an example.
View 9 Replies View RelatedIn LR4 print module the print and print one tabs are greyed out and I can't reset.
View 1 Replies View RelatedI recently have developed a problem using Photo Paint. I have already tried to use F8 and restored factory settings, and I have uninstalled and reinstalled the program. I do not have this problem when logged in as the guest user on my computer, just under my normal profile. I want to correct the settings under my normal profile.
When editing the tool tip does not line up with the selector or cross hairs. For example if I have the paint tool selected and try to paint it actually begins painting about two inches from where I want to begin painting. See picture below: The small clear circle represents where I want to begin, but the red dot is where it paints.
All was working OK and the printer is showing ink cartridges almost full In the Library Module the print review is fine.
Switch to Print Module and the print review is now blank (100% white)
Pictures no longer print
Windows 7
Espon Artisan 835 printer
LR5.3
I have just bought and installed Lightroom 5 and need to set my print size to A3 and in the future even bigger. I do not have the facility at home and need to have them sized correctly for the print shop so they do not have to waste time resizing them. I am at a loss how to do this. I cant find any settings for this size print. A3 is roughly 42 x 29.7 cm.
View 2 Replies View RelatedI cannot seem to reset the print template screen while in the " Print " module. It has adopted the smallest pic size with three times the normal border. I wish to reset to full screen in print module
View 1 Replies View RelatedHow to ADD (almost) white Border around photo(s) to print in print module (not for creating a JPEG) WITHOUT TRIMMING the photo?
I dont understand why I'm so stupid not to be able to acheeve this simple task with Lightroom WITHOUT TRIMMING the image (altering it's proportion and cutting away photo-content)
(on light-gray backgrownd for instance, to use as cutting indications. I know how to use cutting-indications for images i print without a border)
(i do not whant to use workarounds, the kind of preparing "identity plates", a new one each for infinite variations of proportions to use as fullblown-up backgrounds..)
How do I get my photos printed? I select a photo but I get the maessage that no photo was selected.
View 2 Replies View RelatedI have LR 4 and now I have bought a Canon 70D. Lightroom said it was unable to interpret the RAW files and directed me to get an update. I have updated to 4.4 and still have the same problem. How can I get my RAW files into Lightroom 4?
View 9 Replies View RelatedIs it possible to import directly to Lightroom 4 via LAN connection? I want to avoid using the Canon EOS utility software as an intermediate step.
View 4 Replies View Related