Photoshop :: Save As File Format Misaligned?
May 31, 2012
When saving as in photoshop CS6 on a mac pro Lion 10.7.4 The File format are inncorect I save as a tiff and get sct I have to save as Photoshop DCS1.0 to get a tiff file If there are a wider range of file formats available when saving an rgb formattted image it is some times very difficult to work out which option to choose presently saving everything as psd as it is simpler.
Also when opening files, the enable selection box is alway set to a blank and i have to scroll down to the last two option to get "all readerble documents" or "all documents" I have added the odd file formatt they seeme to work fine but could i assume be casusing an issue.
File Formats:
AdobePSDXFileLoader.plugin
ICOFormat.plugin
JPEG2000.plugin
PBM.plugin
PCX.plugin
[code]...
View 3 Replies
ADVERTISEMENT
Jul 19, 2012
I have an action in which it will place an image onto an image like a watermark, when i place the image, it is not center by center so i drag it or use keyboard arrows to center and then press enter, then i saw its on the center, but when i save it, the saved image is not on the center, how was that?
you can see that the right side of border it is not centered because the left side border is thicker than right side, here is the part of the action
you can see that i move the image after i place it because its not on the center so adjusting it makes it at the center but the Translate part is not equal.
View 18 Replies
View Related
Sep 23, 2012
I want to add a custom button to the text formatting dialog , How can I add my custom button behind the OK button?
View 3 Replies
View Related
May 23, 2013
When I enter text in a text box it appears with the baseline of the type above and on the top edge of the text box. If I start with an uppercase letter it overprints the second letter in the series. The character window seems to be in order with all the spacing and leading properly identified. Have tried a reinstall to no avail. Using Windows 7 and PhotoShop8. This just stared happening it had worked properly for a long time.
View 3 Replies
View Related
Oct 13, 2010
Whenever I add title text which appears to be perfectly centered in the editor, some of it disappears to the right after rendering. To fix this I have to guess how far to the left I enter the text in the editor so it doesnt disappear. Is there some option which would allow me to enter text and have it appear as I enter it? The text is over the background of a colour and I suspect it doesnt like the fact that I am outputting the result as 16:9 which I thought vs pro x2 can handle.
View 14 Replies
View Related
Jun 3, 2013
Problem in my Inventor Fusion: as shown in the attached image, when I try to move a feature in my model, the X axis in the 3D Move/Rotate tool is not parallel with the true X axis of the model. I don't know how it got like that, but I would very much like to change it back.
View 2 Replies
View Related
May 30, 2012
Granted this is a minor issue, but when Revit 2013 is opened, before actually opening a project file, if I click the add-ins or some of the other menus, they don't appear in the right spot. See attachment as an example.
View 9 Replies
View Related
Jan 19, 2012
Right after updating to 3.6 I started having printer problems on my Canon Pro9000. No matter what size I print, all the prints are seriously misaligned. When using any other program I don't have this problem (Just Lightroom Only). Is there a way to go back to the previous version which I think was 3.3 or is there a fix for this?
View 5 Replies
View Related
Aug 28, 2011
I recently have developed a problem using Photo Paint. I have already tried to use F8 and restored factory settings, and I have uninstalled and reinstalled the program. I do not have this problem when logged in as the guest user on my computer, just under my normal profile. I want to correct the settings under my normal profile.
When editing the tool tip does not line up with the selector or cross hairs. For example if I have the paint tool selected and try to paint it actually begins painting about two inches from where I want to begin painting. See picture below: The small clear circle represents where I want to begin, but the red dot is where it paints.
View 8 Replies
View Related
Mar 20, 2014
URL....I am using PSE 12 as a photo editor for Aperture 3.5.1 and the photo is duplicated (as a tiff) in Aperture and PSE editor opens with the image. When I close the file and say to save the file it brings up the save as window.
I tell PSE 12 to "on first save -- save over current file" it now brings up the "save as" window and won't save over the file (changes the file type from .tiff to .tif)
View 2 Replies
View Related
Jan 23, 2013
I have Photoshop CS6 and Elements Premiere 11 and both were showing estimated file sizes properly up until a couple of weeks ago, and both stopped at the same time. Using Image, Mode I have verified on both that the images I am trying to save are 8 bit and not 16 bit images. I am on Window 7, 64bit.
View 9 Replies
View Related
Jun 14, 2012
From the start, I wasn't able to save to jpeg without getting a dcm extension (no jpg extension). However, if I saved to Multi-picture Format, I would get the familiar .jpg and everything worked fine for a while. This morning I cannot find a file format in "save as" that results in the .jpg file extension.
View 2 Replies
View Related
Apr 29, 2012
when im about to save my file *project* nothings happen
View 2 Replies
View Related
Nov 13, 2012
[CS6 Extended]I want to click with the mouse on a symbol (normally it should be I disk symbol I think) to save mychanges instead of use of File->Save or Ctrl+S.
But the problem: I can't find a disk/save symbol in Photoshop andalso don't know how can I get it.On "Window" menu I can't get a word "Save" to checkmark it.How can I get a "Save" symbol in Photoshop CS6 Extended?
View 4 Replies
View Related
Nov 6, 2012
I have a number of PSD files I've created and I'm trying to save them as PDFs. I can Save for Web and Devices, I can save as a .gif, .eps., and every other format I've tested, but I cannot save as a PDF. I get the error:
"Could not save a copy as (filename) because the file is already in use or was left open by another application."
I'm running Adobe Master Collection CS5 with Photoshop CS 5.5 (12.0.4 x64) on a Windows 7 64-bit machine.
I have a 928 GB HD with 697 GB free.
I have rebooted and tried saving the files immediately after I reboot. I have killed my virus scanner. I have killed a number of other possible culprits including Acrotray.exe and CS5ServiceManager.ext
I have run Process Explorer as recommended by Microsoft and found no applications using the file. I've also tried saving the file to my external hard drive and/or renaming the file with only rare luck.
The boards seem to suggest Adobe isn't taking responsibility for this and pointing it back to the OS or other software. How/where to kill whatever process it is - but at this point, all my indicators point back to Photoshop.
View 11 Replies
View Related
Jun 27, 2013
I have the student version of AutoCAD 2012 on an HP laptop with Windows 7 Home Premium OS. I originally installed AutoCAD in June of 2012. It worked fine for 9 or 10 months but now whenever I select File/Open, File/Save, or File/Save As, AutoCAD stops responding and the spinning blue donut appears. AutoCAD never comes back and I have to close it from Task Manager. I uninstalled AutoCAD and reinstalled it, and the process went smoothly. However I still have exactly the same problem with the File operations. I apply Windows updates, but other than that have not made any changes to the software on the laptop. AutoCAD works fine for everything except the File operations. I am able to save with CTL/S and am able to open AutoCAD files from File Manager.
View 3 Replies
View Related
Jun 26, 2012
Save PSD File of Social Icons to Separate PNG image files for each file
View 7 Replies
View Related
Nov 18, 2012
I did a search around, and did not find the answer. Basically I have attempted to create an action in Photoshop CS6 which will save a file in the tiff format after i crop the image. I want the file name to be the name of the image (which is supposed to change depending on name of the image) like this:
1280x720_MGXXX.tiff, where, in my case the XXX represents DIFFERENT NUMBERS.
I want to apply the action to one image at a time. Each image has a different number (name). I record the action, add the 1280x720 text to the image name in the Save dialog. I am saving the image in a different folder from the source file. The source file name is _MGXXXX.tiff (again XXXX is a number like 2220...).
When I run the action on a file, say "_MG2221.tiff" it adds the 1280x720, and saves the file. When I apply the action on the next file (_MG2222.tif), the action overwrites the existing file, 1280x720_MG2221.tif, with the image. The action always uses the name I entered in the Save dialog!! I think I was able to do this in CS4 and CS5.
I want to be able to open a file, crop and adjust it, and then save in a diff location with 1280x720 pretended to the file name.
View 2 Replies
View Related
Aug 17, 2012
I am trying to find a way to save my image file as a jpeg and add -web or -print to the existing file name. This way I can easily see which files are lower resolution for web posting or high resolution for printing.
View 8 Replies
View Related
Nov 26, 2006
I am saving work as jpeg into desktop file.... sometimes (not always) when I go to retrieve it ...it shows up as a file that I cannot open, not a normal jpeg. I just tried to copy and paste to show here..then draged into this space and it opened...tried to save it to desk top from here but it is still showing up as a very weid icon that will not open...? In the properties it shows as a jepeg, but the icon is totally different..
View 1 Replies
View Related
Mar 2, 2013
I save a lot of files to "save for web". After saving PS asks if I want to save changes to the original file. I never want to save the changes to the original. Since the default is to change the file I am afraid I will accidentally OK the change without wanting to. I would like it to stop asking and just not save it. Is there a way?
View 5 Replies
View Related
Jun 5, 2008
I just had a question about the slice tool. Is there anyway I can save slices I make to one .psd file so they can be applied to another .psd file?
For example with these two layouts (2 images):
If I could apply some certain slices to the first one, it would be nice to automatically be able to apply them to the second.
View 2 Replies
View Related
Nov 2, 2012
When i try saving something it comes up with could not save as (file name) because the file could not be found and need to save this file.
im using photoshop cs5.1.
View 1 Replies
View Related
Jun 18, 2013
am having an Issue with CS6 when saving files. When saving a file using the 'Save' option (not 'Save As') the file is not staying at the size of the artboard as it should, it is however being aurtomatically cropped down to the actual artwork size. This is causing issues with the Process we work with as we need the file to stay at the artboard size.If I click 'Save As' and change the Adobe PDF Preset to 'Press Quality' then this works, however this means that every file we save(which is quite alot in a day) means we have to go through the 'Save As' option and manually change each save.why this has suddenly started to happen with our Illustrators and do you know how to fix this so that it stays at the Artboard size when 'Save' is used?
View 17 Replies
View Related
Feb 12, 2013
I found this error a bit strange, my colleague it trying to save a file and this error keeps on coming out (see attachments). When we try to save it, it only saves as a temp file. When we try to open up the temp file and try to save it, it still doesn't allow us to do. Also, when we cancel the save, the original file will be gone and he will lost all of his data. Below are the specs of the computer and version of the AutoCAD.
Computer: DELL Precision T5500
OS: Windows 7 Ult
AutoCAD Version: 2011
Also, we're using ProSteel Series 3 as well. We tried saving the file using ProSteel and just AutoCAD but it didn't do the trick. I've tried some options (listed below) that might get it to work but still no luck.
1. Restart the computer.
2. Repair / Reinstall AutoCAD.
3. Give permission to the folder (read from the forum).
View 4 Replies
View Related
May 24, 2013
I'm using the file dialog snippet as the foundation for a save as dialog box for saving a new copy of my template assembly to a project folder. Is there a way to disable the ability to click on a file in the window which puts that filename in the input box? The assembly file name is standardized and pre-"calculated" by my code and its a decent hassle if you accidentally click another file because the user would either have to rewrite the file name by hand, or cancel out of the dialog box and re-navigate to the project folder.
Inventor 2013 SP 1.1
View 1 Replies
View Related
Apr 29, 2013
if i need to rename or change anything in the iproperties of ipt, im doing it from the vault.my problem is that, when i change something in iproperties of an ipt thru vault, i have to open the idw to update it.
as most of the iproperties in ipt shows in the idw.
its easy to change the properties in vault. but its deleting its purpose if i have to each idw to make sure i have the updated idw.is there a code where i can open all idw and save the same file and checking to the vault automatically?
View 9 Replies
View Related
Jul 8, 2013
Civil 3D 2013.One of the problems my team has is that we have a number of remote offices that all work on the same drawings. To ensure integrity of the drawings, we use a Wide Area file replication and locking service to ensure the files do not become out of sync and corrupted between offices.
AutoDesk seems to open and save files and their subordinate xrefs serially in a single thread instead of in a multi-threaded manner. Because of this there is a Huge time impact on just opening and saving files at remote sites as a result of Civil 3D having to wait for the home office file lock check on each and every file before opening the next file.
We have 100Mbit down / 20Mbit up transmission links at both sites dedicated to the file replication, with Gbit backbone in both offices.
note that the remote site has a full copy of all files in its replicated share. These local files are what Civil 3D is opening. No Files are being transferred during file open unless a remote change has just occurred (proven through replication logs).
When the drawing file is opened for editing, a file lock check is performed and Windows waits for the response to ensure it can be opened for editing before telling Civil 3D. When Civil 3D has this file open, it has a list of all the xrefs for this file. Civil 3D then seems to open each file in sequence.
This is a problem when a large latency is introduced through our 3rd party Wide area file system by a remote site file lock check.
This is not AutoDesk's fault but the compounding of the two system's operational behaviours, causing a Very long wait on file open, Save, PaperSpace operations (30 minutes for large drawings).
I would like to see a multithreaded (threadpool) file open occur against the entire list of xrefs (during save as well). Then recursively executed for all subordinate xrefs of those files until the operation is complete.
As long as a file list is maintained during the operation and updated as each file operation completes (which obviously it is) in the primary thread, this should not cause any problem. All dependancies can be opened in sequence once the initial file operations are complete and when a particular file in the list is required but not open yet, it's priority can be raised in the threadpool.
View 1 Replies
View Related
Nov 3, 2012
I'm trying to edit some map files in the game called "Farming Simulator 2013" by GIANTS. They are png files & I can load/edit the files in paint. But after I save the files back to the proper game folder & try to run the game I get an error stating :grass_weight.png' incorrect format. Must be 8bit single channel. Is there a plug-in to save a file in this format? Am I missing something or am I just not going to be able to edit a paint,net file in paint.net? I
View 6 Replies
View Related
Apr 7, 2014
I have worked in Sony Vegas 9 and I was hoping Adobe Premier Pro CC was similar--- but its not. I can't figure out how to render and save a file as a windows media or mp3 or in any format for that matter.
View 4 Replies
View Related
Sep 4, 2012
I've designed a logo with a green background (C: 57,5 - M: 15,15 - Y: 99,73 - K: 1,65) in Illustrator cs6. When I want to save my file as .PDF, and I open my PDF file, the green colour has changed (C: 59,22 - M: 12,94 - Y: 90,98 - K: 62,67). When I save my file as PDF I use the standard properties of Adobe (Acrobat 6, PDF 1.5).
View 6 Replies
View Related
