When using my HP 7020e photosmart printer and Adobe photoshop elements 11, I get a very small white border on the prints. I have set for borderless printing. Adobe says the print size is 4.2 x 6.18 instead of 4 x 6.
View 2 RepliesI am fairly new to Photoshop Elements 3.0. Can someone tell me how I can print a photo WITHOUT the border around it? I want it borderless.
View 2 Replies View RelatedI have a HP Photosmart 8250 photo printer. I also have Photoshop CS 8.0, how do I print borderless 4x6 and 8 1/2x11 photos in photoshop CS? Please take me step by step, since I dont know much about photoshop.
I have my digital camera set to take pictures at 2272x1704. Is this setting to high? What should I set it at? It's a Samsung Digimax A402 4 mega pixels.
I have owned Photoshop CS3 and CS5. I have used these products across 3 different computers, OSX and Windows in several different versions. I have used 4 or 5 different printers and each and every time my images print offset to the left of the page with about an 1 inch blank space down the right edge of the page. Portrait or Landscape, it makes no difference. I have tweaked the settings in Photoshop and the operating system and printer settings endlessly, all to no avail.why Photoshop isn't capable of printing an image centered on the page or borderless. I am currently using Windows 8.1 beta, an Intel i5 based system, a Canon MG6220 printer with Photoshop 5.1 64 and 32 bit.
View 1 Replies View RelatedI am printing to Epson R3000 with LR managing the colour management. I can't get the borders to zero in the print module and have a small boarder of a few millimetres on a one cell print.
View 3 Replies View RelatedI just purchased a new HP photosmart 7520. When I am in print layout, with the printer settings on borderless printing, I still get a border. This doesn't happen on every template - Avery #3268, 3266, new blank sheet, etc. Seems to work properly when using business cards, How do I get it to work properly with no border
View 1 Replies View RelatedI've been experiencing a problem when printing borderless on with LR4. Although I'm using borderless print settings, all margins are 0 and cell size is 4x6 or 8x10 or whatever it needs to be, the bottom edge of all photos has a 1-2mm line of unprinted paper.
This is also visible on the print preview of LR4, as you can see on the bottom of the attached image.
When trying for borderless A4 prints there is always a small border on the top and right hand edge of the resulting print.
This only happens when using LR.I am printing to a Kodak c310 printer.
I have PSE 9. HP 5514 printer. I can print photos borderless through Windows, but not through PSE. In PSE, I have unchecked the box for Border, have checked the Crop to Fit box and Center Image box (and every possible combination thereof). My photo has been sized to 4"x6" in PSE, and I have checked all boxes in the print dialogue for 4"x6". I get a border no matter what I do.
View 1 Replies View RelatedI used to get borderless prints in elements 3 but I can't in elements 10. I have the same printer and computer. Why?
View 2 Replies View RelatedHow do i print borderless pictures using elements 10
View 3 Replies View RelatedWhat do I have to do to print borderless photos on a LaserJet Pro 200 M251 nw printer?
View 2 Replies View RelatedWhen trying to print borderless the menu reverts to the smaller size. ie when selecting 5x7 it reverts to 4x6. Ditto 8x10 and 11x14 etc. The paper size stays the same, just the print size reverts and the desired size disappears. I contacted Epson twice and both times I was told it is a software issue, not the printer. The same thing happens in Lightroom, but in WEindows Gallery Live the printer works correctly which indicates the driver and printer are working correctly. I am using Windows 7 and had Elements 9, but Elements 10 came bundled with the printer so I upgraded to 10, no improvement.
View 5 Replies View Relatedpicking up Illustrator again and the first thing I did was create and fill a few rectangles.
However, the rectangles have a gray border to them.
My document prints fine from Illustrator with the paper setting as U.S. Letter but it clips the bottom of the image. So I select "borderless 8.5 x 11" and it no longer clips the image but it prints WAY darker, from golden do a dark gray brown.
View 2 Replies View RelatedAll my settings are correct. I have correct paper selected (borderless). All sliders are at ZERO. Aspect ratio of picture is correct. Correct ICC profiles are installed. THIS IS CLEARLY A LIGHTROOM ISSUE! I can print perfectly using Canon's supplied software.
Macbook Pro (new)
Canon Pro-100 Printer
I have been trying to make business cards in Lightroom 4. Everything works fine except no matter how I set things up my 2 X 3.5 inch photos print at 3 11/16 X 2 1/8 inch. My printer is set to print borderless 4 X 6. My settings under Custom Package are as in the screenshot below.
View 1 Replies View RelatedThis is probably quite simple but the answer eludes me. What I want to do is to create a borderless coloured rectangle (which I can do!), then drag text over it and cut the text out so it leaves the original rectangle with transparent text if you know what I mean.
I can easily do this in PS with the magic lasso but obviously I lose the quality when re-importing it back into AI.
OK. So how do I print a 4x6 borderless print on my new 7510 Photosmart? My only options seem to be a 4x6 tab print. What gives?
View 7 Replies View RelatedI have 4 x 6 papers with rounded corners and I want to print on these papers borderlessly.
I choose 4 x 6 paper size in Lr and borderless option clicked in the Epson driver.
In this case, some drops of inks can not fall on the paper (at the rounded corners).
Is this case harmful for the printer?
If so, how should I print borderlessly from Lr on papers with rounded corners?
Upgraded OS from W7 (64bit) to W8.
Using Canon Pro 9000 Mk2 printer, unable to select and print borderless prints of any size.
However, using Elements 11, there is no problem which suggest the problem is confined to LR4.3.
Have uninstalled and reinstalled the driver w/o success.
When I go to print to Adobe PDF (one of selections under printers) the program does not respond.
I have acrobat installed. what can I do to print to pdf rather than printer.
How exactly are you supposed to "install" a printer when it already shows up as the correct option in trying to print a photo? Every time I choose the correct printer (not the FAX), it brings up the fax screen. A previous discussion said to rename the printer? Where? In photoshop? In the Control Panel? I have rebooted the program and the computer. The same problem keeps repeating. In the past, the same printer and program have worked perfectly. What causes this error?
View 1 Replies View RelatedHow to print A3 size borderless portrait using Epson R1500W. I've got this printer 2 days ago and still can not figure aout how to do it. I've got few mm blank in either side of length wise.
View 3 Replies View RelatedWas always able to print multiple photos with borders/effects etc using a Dell computer but unable to do this with Mac Book Pro 15 inch. Firstly it directs me to "Editor"( i.e.unable to print from "Organiser ) but canot find "Picture Package".
View 7 Replies View RelatedWhy when i print a photo on my new HP Photo-smart does it only print in greyscale
View 1 Replies View RelatedMy daughter has created a project (magazine cover) and the image size is 210 (w) x 297 (h), i.e. A4.
When she selects A4 as the paper print size the image prints leaving a white band of about 15mm at the foot of the printout. Printer : HP wireless B110a. She has set the image pixels at 600 per inch which seems a bit high. It looks like the foot of the project is slightly cropped off.
how she can print full A4 size with no borders - i.e. her A4 project fills an A4 page !
I need to print a large number of photos with the creation date appearing on the photo. I would like to avoid having to manually add the date on each photo. Is there some setting or some way to do this automatically ? I am using Adobe Photoshop Elements version 11.
View 3 Replies View RelatedFrom time-to-time, I seem to have had a temporary printing issue with Photoshop Elements 8, whereby the photo I was trying to print would not be printed completely, but part of it would be cut off, as if the printer's print-head would not be receiving the data from Photoshop past a certain point in one particular plane.
Up to this morning, I had never encountered any printing issue with Photoshop CS6, which I have had, and printed with, for the past 6 months or so. This morning, however, I encountered the same issue, for the first time, using Photoshop CS6. It is now printing properly again, but why do I occasionally encounter this with either software?
When I normally print, I like to print photos to exact sizes, but which vary greatly, and so I prefer the technique of creating a new blank A4-sized document and dragging my photo into this document and, by using Free Transform, size the photo to my exact requirements, before printing onto good quality A4 glossy or sometimes matte paper.
What happened this morning was that, using the technique above, I was trying to print a very small passport-sized photo over to the right-hand side of a sheet of A4 paper, with the blank document in the portrait orientation. My photo was only partially printed, and cut off past a certain point in the horizontal plane. By dragging my photo further towards the centre of the blank A4-sized document and reprinting onto the same sheet of A4 worked fine. After experimenting a little by printing the photo in various places on the same sheet of A4, I discovered that the photo was not printing past a certain point, in the horizontal plane, towards the right-hand side of the sheet of A4.
This cut off point was consistent in every printing attempt. There was a certain point to the right-hand side of the sheet of A4, where, in the horizontal plane, it would simply not print past. By measuring this cut off point in the horizontal plane, it is 4.8cm from the right-hand edge of the sheet of A4, in its portrait orientation.After resetting all tools, turning the PC and printer off and then on again, launching Photoshop CS6 and retrying, it seems to be printing correctly again, and I am able to print my photo anywhere on the sheet of A4, without anything being cut off past a certain point.
I feel sure some of my settings must be incorrect. I have never had trouble until now. PSE 10 keeps pausing, screen dims and error message " not responding " appears. Also, trouble printing anything that is an Adobe document. All of this started happening at once, so I assume they are connected. make sure my drivers, settings, etc... are correct?
View 1 Replies View RelatedI'm unable to get correct results in printing through Photoshop Element 11 and my printer Epson R1800.Though, it works correctly with other software that support colorsync (ex: DXO Optic Pro 8).
I tried every combination with my ICC profile : "let photshop manage colors", "let printer manage colors", ... Each time the resulting print is too dark.Even worth : when I print several time the same photo with the same parameter under Photoshop Element, I don't get the same result each time.
On DXO, I print by activating colorsync with the same profile I use with Photoshop Element and the result is always great with each time correct colors rendition.
My configuration is : iMac 24 2007 + Mountain Lion + Epson R1800.