Is anyone using the Epson Stylus Photo 890 with Vista 64 bit? I cannot find drivers or profiles for that combination of OS and Printer. I have searched everywhere on the web.I need drivers or this printer is history ( yes it already is history but still works fine otherwise).
View 2 RepliesWhen I try to print a photo thru Photoshop to Epson stylus photo 2200, I get a meassge: paper out or not loaded correctly. Photoshop will print to another printer and the Epson will print from other appllications such as Word. It seem Photoshop and Epson are not communicating properly. The p[rintilng gliltch followed on the heels of Epson printing several images that were nowhere close to the images in Photoshop. recently, I added somw upadtes — a driver and at least one program update. I un;installed and reinstalled the CS 5, but the problem persists.
View 3 Replies View RelatedI have recently upgraded my system to Vista 64 and PS CS4 from Windows XP and PS CS3. Now when I print my photos have a severe green cast. I have tried turning off CM at the printer, in PS, both and on in each place and both, nothing seems to work. I have DL'd the paper profiles as well, still doesn't work.
View 3 Replies View RelatedI'm using Lightroom 3.6 and an Epson Stylus Photo R800. This printer is capable of printing very high quality pictures, as I know by using it for almost 5 years. I have bought Lightroom about 6 month ago. I have tried anything I can think off to get those fabulus pictures out of my Epson printer. I alterd color managment settings, changed print resolutions, downloaded new printerdriver, ... Nothing works. Print quality when printing from Lightroom is very poor. Bad colors (dark), stripes over the whole image, it looks like nothing realy. One of the things that I noticed is that the maximum resolution for printing in LR is 720 ppi. My Epson is capable of 1550 ppi. I see a lot of discussion going about print quality with lightroom... I think however this is a more basic problem. My print qualiti is realy very very bad...
Note, When I export a picture to .jpg format (I shoot in RAW only), and print this directly from Windows, I do get the perfect picture a was used to... I cannot believe that Lightroom is unable to do the same.
I don't understand why Lightroom will not send print commands properly to my Epson Stylus Photo 1400, but all I get is error.
Since the printer works with every other program on my computer, including Elements, it must be a Lightroom problem.
I have a iMac 27" Mac with OSX Lion running Photoshop CS5...When i print to my Epson Stylus 1400 color printer I get the following error message...Disc Not Available...All other printing works
View 1 Replies View RelatedI recently upgraded to CorelDRAW X5 from X4. I'm having problems printing a landscape page to an Epson Stylus Pro 7880. This is a paper roll feeder. No matter what combination of settings I try it will only print portrait orientation. I had zero problems with X4. I have read as many of the previous forum posts I could find on this issue, so I'll add - I don't have a PPD file and the manufacturer does not either.
View 9 Replies View RelatedWhy I can't use my scanner ( Epson Perfection V600 Photo )
View 3 Replies View Relatedhaving problems with his Epson Perfection 3200 Photo scanner. He is using Photoshop 7.0. With Photoshop open he goes to 'import' and then clicks on 'Epson 3200 Photo' and he gets the following message
"Could not complete the import command because of a problem with the acqusition module interface"
and then it closes Photoshop. I have uninstalled all of the scanner software and reinstalled it and the same with the Photoshop 7.0 software but I still get the same error message.
How can I access my Epson Perfection 2400 Photo scanner after upgrading from PS CS4 to CS6? There is no Photoshop File/Export/Epson scanner listed anymore. I downloaded a TWAIN plug-in and loaded it in the PS Plug-in folder.
View 1 Replies View RelatedMy MAC prints fine to my printer using IPHOTo software...the problem is with PE9.
View 4 Replies View RelatedI am unable to link my Epson 3200 photo scanner to PS Elements 11 on my new iMac. I have tried downloading the software from the Epson website, but when I load it the nothing shows up. I moved the the Optional Plug-ins > Import Modules TWAIN plug in to the Plug-ins. That had no affect at Photoshop Elements 11>Support Files>Import.
On my old iMac I could link and download files from the Scanner.
I just upgraded from Photoshop Elements 6 to Elements 11 on a brand new iMac running OS X 10.8.2, but Elements 11 will not recognize my Epson Perfection 4990 PHOTO Scanner as an option to import from when I click on "File" then "Import." Is there a Plug-In that may be missing for this to operate as it used to in Elements 6 running on an older G5 Non-Intel processor? I don't have the new Elements 11 Disk to copy anything from, since I downloaded the program directly from Adobe.
View 1 Replies View RelatedI have a touchscreen (Acer video screen, Gateway computer, Windows 8)--what settings do I change to use a stylus to erase or draw in Photoshop CS6?
View 1 Replies View RelatedI am using it for architectural illustrations. I am looking for a stylus that will help with brush and line effects.
View 1 Replies View RelatedPS 7. I have looked in the help files and such and I can't seem to find where I can turn off or turn on the stylus for brushes. Prob right under my nose. I know in 6 I had the tabs at the top.
View 1 Replies View RelatedI currently updated the operating system for my Mac OSX, and I believe this is where the issues are stemming from.
I've been working in CS5 using a Wacom Intuos 3 tablet along with the stylus pen. Recently when I am working in CS5 I've noticed that while using the brush tool the little "dot" tends to dissapear while painting. This also happens if I use a short cut ie. brush tool/command key/eyedropper. The only way for the "dot" to return is either to move the pen around the screen, clicking on things until it reappears OR using the magic mouse, but sometimes this doesn't work either.
I am not very knowledgable in Mac or CS5, and I have tried resetting some of the controls, but nothing seems to be working.
I installed Photoshop 6 on a HP tablet computer and when I try to get photoshop to respond with pen size and preasure to the preasure I use to apply my stylus to the screen it acts like I'm using a mouse. I have a Wacom stylus pad and Photoshop can respond to preasure sensitivity, with the Wacom. How can I get Photoshop to recognize my HP tablet stylus?
View 1 Replies View RelatedI amprinting on an Epson Stylus Pro 4800 using Photoshop CS3. Although the printer will accommodate lengths up to 55 inches, when I try to print something longer than 30 inches, Photoshop crashes. Epson adives the purchase of RIP software. Is there a way in Photoshop to get around the length limitation?
View 1 Replies View RelatedAfter installing photoshop cc on my dell venue 8 pro, the program refuses to register the pressure sensitivity of the active pen display. The device is running windows 8.1 and uses the synaptic pen technology as opposed to wacom. Is there any way for me to force photoshop to either look for the default windows drivers or better yet get proper support for synaptic?
View 1 Replies View RelatedUser guide states: "Customize Brush Tip Shape options like Granularity, Spatter, Hardness, and Distortion controls. With a stylus, alter the spread of sprayed strokes by changing pen pressure."
I see the settings for controlling ganularity, distortion, spatter, etc., and the stylus tilt angle seems to control "distortion".
The cursor "spray" outline seems to change shape as when the stylus hovers over the tablet. But there appears to be less control when stylus contacts tablet.
I used traditional airbrushes for years. There are some interesting emulations here, but a better description
I recently bought an intuos 4 and I want to start learning digital painting. I come at the end of a paintful configuration of keystrokes, scripts, gimp painter etc...
Now I can stat painting
But what is the best way to hold a stylus? I read somewhere that I shouldn't hold it in a scholar manner but it's like any other way doesn't give me access to my stylus buttons.
When painting, how do you hold the stylus?
I'm having a problem with my Wacom tablet. The stylus tool works fine (gradients, pen, paint) except for the erase tool - it won't erase to full transparency when I select the erase tool then drag my stylus. This is weird, since the actual eraser end of the stylus works fine: I just hate using that end of the tool, and much prefer using the stylus' pointed end to do all my work.
View 3 Replies View RelatedI have both a 16 button cordless puck and a 2 button cordles pen stylus. I have the 16 button cordess puck configured to AutoCad 2011 tablet0.dwg. I want to be able to use the 2 button cordless pen stylus for digitizing/tracing drawings from model ship kit plans. So, do I calibrate or configure the pen stylus so AutoCad 2011 will recognize it?
View 2 Replies View RelatedHow do I get Epson Scan from Photoshop?
View 1 Replies View RelatedI am trying to use Epson perfection 4180, which I used for CS2, The download of the TWAIN plugin from the Adobe website, which is promised to make this function, does not work.
View 1 Replies View RelatedI bought an Epson R280 printer that can print directly on the DVD. But when I try to print from Photoshop, it always comes out off centre.
I tried to print using the software that came with the printer which worked perfectly. But I prefer to use Adobe (photoshop,encore, etc.). Has anyone else had similar problems or know of solutions?
setting up CS3 (Windows-Vista)for use with the new Epson R2880 printer?
View 1 Replies View RelatedI just installed a new Photoshop. I want to import a scan from my Epson and it is not connecting. What is the next step?
View 4 Replies View RelatedI am unable to print from Photoshop CS6 to two different Epson printers - an Epson 9800 and an Epson 7880. I have tried to print from three different computers (OS 10.6 and OS 10.8) and have also tried three different USB cables. Each time I get the same results - the computer acts like it sends the data to the printer, but the printer never prints anything. I am not getting any error messages. I am attepting to print a 3960x2160, 720 DPI RGB TIF image. I tried printing from Preview as a test but that didn't work either.
I have tried reinstalling drivers, turning the computer and printers on and off, cleared my caches and repaired permissions, but so far no luck.However there is ONE situation in which I am able to print - if I save the image as PDF and print it from from Acrobat, specifically with "Acrobat Color Management" selected, it WILL print. If I try to print from Acrobat with "Printer Manages Colors" selected, it will not print.
I am having problems printing from Photoshop CS6 to an Epson Pro 3880 in paper sizes 13x19 and 17x22. I have not had this problem several weeks ago, but it has shown up in the past week.
I worked with Epson Tech support and we were able to determine that the problem was with Photoshop which took several days working with tech support. We downloaded new drivers several times and reset the printer to factory settings. Then we tried printing and still had the same problems a small print in the lower left hand corner of these larger papers. The printer prints fine on 8.5x11 paper. We then tried printing from Lightroom 4 and it did fine. So next we uninstalled Photoshop CS6 and reinstalled and still found the exact same problem.