Photoshop :: Printing Photographic Images To Epson XP-800
Aug 28, 2013
I cannot print photogrpaic images with my desktop MAC (OS X10.8.4) from Photoshop Elements 9.0 to my new Epson XP-800 printer. Printing is not a problem with Word text or images from iPhoto- it is only with PSE that there is a problem. The problem persists even if I try using a cabled connection rather than WiFi. I have ensured latest software from Epson has been downloaded. This problem did not occur when using the same system with the previous printer (Epson Photo Stylus 1290).
Any workaround of moving the edited PSE image back to iPhoto & printing from there (which admittedly does work but shouldn't be necessary).
View 1 Replies
ADVERTISEMENT
Jan 3, 2013
I am having problems printing from Photoshop CS6 to an Epson Pro 3880 in paper sizes 13x19 and 17x22. I have not had this problem several weeks ago, but it has shown up in the past week.
I worked with Epson Tech support and we were able to determine that the problem was with Photoshop which took several days working with tech support. We downloaded new drivers several times and reset the printer to factory settings. Then we tried printing and still had the same problems a small print in the lower left hand corner of these larger papers. The printer prints fine on 8.5x11 paper. We then tried printing from Lightroom 4 and it did fine. So next we uninstalled Photoshop CS6 and reinstalled and still found the exact same problem.
View 4 Replies
View Related
May 7, 2013
I have recently upgraded my Mac Pro 3.1 to Mountain Lion (10.8.3). I have Adobe CS4 Design Standard and I used to print to my Epson SP9900 (using IP connection) from Photoshop CS4 without any problems using native Epson drivers. I downloaded the most recent drivers from Epson for SP 9900 on Mac OSX 10.8 but now prints come out as shattered, garbled or offset multiple times. Only from Photoshop, as Illustrator CS4 prints fine. As are other applications, including browsers and Microsoft Office.
I removed all the drivers and printer queues, reinstalled Design Standard CS4 and newly downloaded drivers from Epson and the first print came our OK. Then the second printed the same as before - garbled and offset.Should I try CS5 (I have the installer disc and license), or would I have the same problem? Am I facing the prospect of going back to Snow Leopard (if that is possible without completely reformatting my drive), or are there configuration options not apparent during standard installation?
View 1 Replies
View Related
Aug 28, 2012
I cannot print landscape mode images to my Epson from Photoshop 5.5. None of these combinations work: Choose Landscape in both PS and Epson dialogue: results in a portrait format cropped image. Choose Landscape in either one of the two dialogues: same thing happens. Print from Lightroom to Epson: results in correct landscape format print but there is no method of printing actual size. As I print DVD covers it is essential that the printer prints actual size! I used to be able to print correctly to my KM laser printer, but they have not bothered to upgrade their drivers to Win 7, so that makes the printer worthless. I have already talked to Epson at length. They insist the fault is with CS5.5 and not with their drivers. (I have the latest Epson drivers installed.)
View 4 Replies
View Related
Jan 7, 2009
I am having a very difficult time getting color matched prints with CS4 and my R2880 Epson printer. I had no issues with CS3. I have tried every combination available to me and I get very drab almost browinsh prints. I have the latest drivers and also have upgraded to Vista, no change there at all. I am using the proper ICC profiles as well.
View 10 Replies
View Related
Oct 5, 2008
My Epson Stylus Pro 9600 has a problem with CS3 printing. When printing large images (i.e. 36x60) a portion of the image would be missing at the bottom (blank) The 10.01 update addressed this issue but it seems not completely. The problem was attributed to using a "Custom" print resolution however I still have this problem and after much testing I have narrowed it down to the "Finest Detail" check box under the custom, advanced tab. Checking this "Finest Detail" check box reproduces the problem.
View 9 Replies
View Related
Dec 8, 2012
I am using Photoshop CS4 and trying to print using my Epson PX710W with my New MacBook Pro (OS X 10.8.2 - Mountain Lion) but every time I send a photograph to print it comes out blank?
I am trying to print on to Epson Premium Glossy (4x6) Paper and I have tried other types of paper and sizes but every time it is blank. I always select the correct Paper Profile in the Print Menu depending upon the paper I am using and I select the correct size and paper tray. The print will print from Photoshop if I dont select an Epson paper profile but whenever I use the Epson Profiles it wont work. I even tried reinstalling the paper profiles but nothing happened, and the print remained Blank!
The Printer works with all paper through any other programme just not Photoshop CS4!
View 3 Replies
View Related
Mar 4, 2005
I just bought a new 4000 printer and the prints come out a little darker and with a little more magenta than what appears on my monitor.
The monitor has been calibrated using the spider software several times and each time it comes out the the same and I think that part of the process is good.
I have set my color workspace in Photoshop to US press defelts (Adobe 1998) and all seems well there.
The images have been scanned to 8000dpi using a High quality scanner from an outside source.
I open the image and convert to working space RGB, and do my correction to the image which includes more color saturation.
I go to print the image using Adobe1998 as source and the printer paper ICC as the output. I go to advanced options and make sure color correction are turned OFF and print.
The images on my printer always come out darker and with more magenta that what I see on the screen no matter what Icc profile I use for every kind of paper.
The softproof does not look that way.
When I print using same as source as the output with color correction sliders set to 0 the print will be much closer but still not quite like whats on the screen.
When I do it the correct way(the first way I discribed) why is my print comming out too dark and too much magenta?
View 9 Replies
View Related
May 14, 2009
System: Vista x64Monitor calibration: Eye One Display and basICColor Display software - profiled to basICColor's PrePress setting. Luminance is 130.Paper: Hahnemuhle 'Photo Rag Pearl' (with Hahnemuhle's profile) and Permajet 'Oyster' (with Permajet Profile)Settings in Print Dialog are: Photoshop Manages Colours, Paper profile selected, Perceptual Rendering Intent, Best Photo, ICM, Colour Management OFF (no colour management), Paper Type selected.Image is perfect in Photoshop window and perfect in Print Preview, but prints about a stop under and with a cast.What can I do to get prints that come close to what I'm seeing?Right now I can only get them if I brighten them such that, in ACR, the file would be way overexposed.This is very odd. CS3 was much better.Any ideas?Can I create a profile for my CS4/Vista x64/R2400/Paper Choice combination that will get me what I'm seeing on the screen?
View 1 Replies
View Related
Dec 23, 2007
I have asked Epson and gotten no response so I though I would try somewhere else. I have an Epson RX595 printer that can print to DVD's and CD's my question is ...
Is there a way to print a DVD/CD directly from Adobe Photoshop.? Is there a template that I can download and open in photoshop and it will be configures properly to print to this printer?
View 8 Replies
View Related
Jun 21, 2013
Job disappears from the print que before it starts printing. Print is 83.5 x 35.5. I can print a section but not the entire print.
View 1 Replies
View Related
Aug 25, 2012
Photoshop 13.0 (CS6) - Win XP Pro SP3 32bit
Custom profiles created for printing to the Epson 3800's ABW (Advanced B&W) mode do not appear in the print dialog target dropdown. I'm forced to print out of PS 12 to use this feature.
If I select "Black" instead of ABW in the print driver dialog, I get my selection of ABW profiles in the dropdown, but I need this to work with the ABW setting.
View 16 Replies
View Related
Apr 22, 2009
I'm getting constant red light flashing from loading thick paper (ultra smooth fine art) fromt he back tray.
View 4 Replies
View Related
Oct 13, 2012
I am trying to print from Photoshop CS6 to an Epson PictureMate color printer and an Epson PictureMate 225 printer. In both cases I want to let Photoshop manage color. I am finding no color profile for Epson in the list of profiles provided by Photoshop. The best I can do is choose “display” as my profile. Still my color prints do not match what I see on my screen in Photoshop. They are flat and washed out. How can I obtain print profiles for my Epson Printers to be used with Photoshop 6?
View 2 Replies
View Related
Dec 18, 2012
I am not able to print images in Photoshop cs6 accurately using my Epson r1900 printer. This seems to have become an issue only since installing cs6. The images look dark and murky. I am using osx 10.7
View 1 Replies
View Related
Aug 29, 2012
Suddenly my LR 3 doesn't want to print to my epson pro 3880?
View 2 Replies
View Related
Feb 21, 2013
I have an Imac with Mountain Lion, CS5 and have just replaced my Epson R2400 with an R3000. Now the white background round the image is covered in small cyan and light grey dots. If the image fills the paper, then the margin is affected. But when trying to proof colours I am going through loads of paper as I cannot now print a smaller image on a larger piece of paper, then re-feed the same sheet through with another small image as the paper is now pale blue.
The R2400 was fine for proofing, as the image alone would print and then the printer fed through the remainder of the sheet without printing, leaving the rest of the paper white. I understood from that , that it was most likely a Photoshop issue and some sort of conflict with the Paper profiles. But, I have checked the profiles on my Mac and they are all version 2 profiles. I note that the few profiles that do work without the blue colour do have 'bkpt' in their profiling and that the ones for the paper I actually do use and in fact the majority of the profiles, do not contain 'bkpt'.
View 7 Replies
View Related
Feb 6, 2013
I recently upgraded to CorelDRAW X5 from X4. I'm having problems printing a landscape page to an Epson Stylus Pro 7880. This is a paper roll feeder. No matter what combination of settings I try it will only print portrait orientation. I had zero problems with X4. I have read as many of the previous forum posts I could find on this issue, so I'll add - I don't have a PPD file and the manufacturer does not either.
View 9 Replies
View Related
Nov 23, 2011
I am a Pro Photographer, and have been printing via Photoshop for years, and am trying to print to my Epson 9900 through LR3.
Workflow is simple, Nikon .nef (Raw) files are imported into LR3 - all monitors are calibrated w/ pro-grade color management colorimeters/software ....
Everything looks great on screen, and the TIF files exported and picked up in Photoshop and then printed, look great.
However, my files printed directly from LR look horrible - as if color profiles are being applied twice somewhere, but I can't figure out where.
Images are shot in AdobeRGB color space.
Color management in the Epson 9900 print driver is turned OFF. (same as every other program I print from)
My LR3 screen for printing looks like this:
View 11 Replies
View Related
Mar 6, 2013
Will Illustrator CS5 files print on a standard inkjet printer or is some sort of RIP software required? I'm considering an Epson WF-7520.
View 7 Replies
View Related
Mar 7, 2014
Just got an epson 3880 printer. Printing on epson paper is fine. But printing on Ilford or Moab or other papers from lightroom and photoshop have a terrible magenta color cast. WHen I print the same image from Preview, with the same print driver settings, it looks fine. So somehow the adobe apps (or my settings) are messing up the color sync. I used to have an espon 2400 which worked just fine.
I have Mac OSX-10.9.1. Monitor is calibrated. (Prints to epson paper with their profiles look great...it's just other profiles that are really bad).
View 7 Replies
View Related
Jun 23, 2012
I am trying to print film for screen printing using an epson 1100 workforce. I am not able to select the 'advance setting' box under the separations tab when I try to print separations. I am trying to be able to choose the dot
View 1 Replies
View Related
Oct 9, 2012
Using PS Elements 10 on my Mac OS 10.6 I cannot import images from my Epson CX 7450 scanner. Have had no such problem with PS Elements 8. When I select file, import, the options are limited and the scanner is not listed.
View 3 Replies
View Related
Dec 15, 2011
I'm printing to an Epson 9900 using Lightroom 3.6.
I want to print an array of 4 x 6 images. The prints come out 3.5 x 5.25. Attempting to print a 5 x 7 produces and image reduced by the same scaling.
I also tried with Photoshop CS5, printing just a single 4 x 6 and that also came out strangely.
This is on a Mac OS X 10.7 Lion.
View 1 Replies
View Related
Aug 3, 2013
When I print 11 x 17 paper on Epson R2880 in LR the image begins printing before the leading edge of the paper reaches the printerhead (not prininting borderless.) Only happens in LR and not PS. I am using the LR paper standards for borders.
View 1 Replies
View Related
Oct 22, 2004
I need to use an object and a shadow shot in a studio shoot. It was shot on a light cream background and I need to piece the object and shadow back together and then place on a bright coloured background.
I've tried the background eraser but the quality isn't good enough,
View 2 Replies
View Related
Feb 24, 2006
I'm looking first for a way to describe the color style of this image : it seems to have vivid colors but an almost sepia quality. Or am I misusing these terms?
I suppose I'm looking for someone to guide me into the best way to describe the color-style of this (and most of the photos on this site) so that I can best approach how to digitally edit some of my photos to achieve the same effect.
View 9 Replies
View Related
Oct 1, 2012
I've been trying to print full bleed images to 3880 epson printer from LR 4.1 and for some reason won't let me make 8.5 x11 borderless prints to printer. both the left and right side of image has white borders and top and bottom has none.
both page grids sides go as low as 1 and cell size reads properly of 11.00in x 8.50in. but when you look at image in print mode in LR- it shows white borders on both sides of picture.
been on phone for 3 hrs with adobe and 30 min with epson tech to no avail?
View 13 Replies
View Related
Nov 5, 2012
I'm trying to create a PNG file that maintains its reflection which was captured in-camera. The end result would be that the PNG could be used over any colored background (easy for the object) and the reflection takes on the color of the background (not easy to achieve if you can't multiply the reflection over a colored background).
The image was shot on a white background but needs to be able to fall on any color. It would be easy to use the path around the object to isolate the background to a new layer and simply set the layer to Multiply. I realize that, but these PNG files could end up being used by anyone, and they may not have Photoshop, but rather - Powerpoint.
I've developed a process that does this to a degre, but I end up with a white halo around the feathered edges of the reflection (not shown in the example above - see below).
In the shot above, I've split the (very subtle) reflection in a layer set to Multiply, seen to the upper left along the edge. To the lower right is the same reflection with a white hazy halo bleeding into the feathered edge, and this was generated using the process below. Remember, everything is shot on a white background so the reflection has white feathered into it. I'm like this close to desirable results, but the haze has me stumped.
Here's how I got the right side to be transparent without using Multiply, and saving as PNG. Anyone who opens the file should be able to place it over any color background, supplied to them in PNG format.
1. Using high res JPG image, convert "Background" to Layer 0.
2. Activate Path 1 as selection, invert selection and copy all area around product. Paste that copy to new layer.
3. Using same selection, delete all area around product in Layer 0. Now the product is on a separate layer from the shadow and reflection.
4. Duplicate reflection layer and invert. Turn off all other layers. Go to Channels pane, select Blue channel - Command-click channel - Copy.
5. Return to Layers pane and add layer mask to reflection layer. Delete duplicate layer from step 4.
6. Go to Mask pane (CS5) or Properties (CS6) and click on Mask Edge. Slide the Shift Edge parameter to +100.
7. Run Levels on reflection layer - set the Input mid to .96 and set highlight Output Level to 250.
8. Select background image area using mask - subtract subject from selection using path and run Exposure on reflection layer from menu command: Image/Adjust/Exposure: -0.24, -0.15, 0.70. (Using an adjustment layer for Exposure will not work. It saves to PNG with a different outcome when reopened)
9. Set reflection layer opacity to 60%.
View 42 Replies
View Related
Mar 10, 2013
I would create this movie effect in letter p which is below.
View 7 Replies
View Related
Oct 9, 2013
I need to make a banner with animation. I'm trying to put a dog picture into it. I have downloaded a few but when I tried to resize them they are not retain their shape, example when I try to shrink the top downwards or vice versa the picture itself has been distorted.
Is there anyway that can be maintained for the original picture shape.
I was using an earlier version of that a graphic designer and have upgraded to version 9, I never had any problem resizing image in the previous version.
View 9 Replies
View Related
