Illustrator :: Cursor Automatically Changes To Type On Path Tool?
Mar 27, 2013
Is there a way to disable this function?
I regularly have to edit text within a grid of lines in illustrator. I can replace/edit text zoomed out, but when I try the cursor automatically changes to the type on a path tool. I then have to zoom in, edit text, zoom back out thousands of times a day. It would save me a bunch of time if I could set the type tool to ignore paths and only select text.
I could take the grid of lines on the files I'm working on and send them to back and lock them, but I am dealing with tens of thousands of files, and it's just not practical.
Any way to get rid of type on a path, or at least prevent Illustrator from automatically switching to that tool when I hover the type tool over a path?
View 4 Replies
ADVERTISEMENT
Feb 11, 2014
I'm using AI CC now, but I noticed this problem in earlier versions of AI: If I want to place a one-word label on an illustration I move the type insertion cursor to a speific point on the screen image and click, but then the flashing insertion point, where the label will actually start, pops up elsewhere, usually a line or two above where the cursor was, and a pica or two to the left, forcing me to type the label, then move it into position rather than simply typing it in the right place and moving on. The problem is merely annoying, but I'd like to fix it. It's probably a matter of ignorance-I simply haven't read the right documentation, but I don't know what to call the problem. Where can I find out how to change the position of the cursor relative to the insertion point?
View 2 Replies
View Related
Feb 13, 2014
I created text on a curved path using the pen tool and the the type on a path tool. However, there are portions of the text that I want to taper. For example, my text begins horizontally, continues to the right, and gradually curves downward. As the text curves downward I would like it to taper smoothly into a narrower and narrower text.
View 1 Replies
View Related
Apr 29, 2013
I want to create text on a circle path, so drew the circle, went to the "type on a path tool" and clicked on the circle. I keep getting the message "can't create type". I have tried to use the direct selection tool to select the circle first and without the direct selection.
View 3 Replies
View Related
May 11, 2012
I have some negative space I created(black area, see first image) that I want to fill with type, not just a simple fill.
Basically I want to create the negative space from a bunch of small minus signs(-) that need to line up as they go across. If I type on each path one at a time as the text doesn't line up that way. This needs to be one continuous path. (see second image)
Unfortunately if I add them together, it creates a compound path, which you cannot type on, unless I am mistaken? So I need them to be a path, not a compound object.
View 6 Replies
View Related
Oct 3, 2012
Once you've used a path to put type on, how do you get the path back? Everything I do to recover the path deletes it.
View 2 Replies
View Related
Mar 20, 2014
I know I've been able to do it before, but now when I put the selection arrow (black arrow) into a line of type by double clicking, I am unable to then drag the cursor to select the row of type. Triple clicking does nothing.
In other words, double clicking with the selection tool places the cursor in a word, but how to then highlight the word??
In Preferences, it doesn't matter if the 'Double Click to Isolate' box is checked or not and the 'Object Selection by Path Only' is unchecked.
I know it's something simple.
View 2 Replies
View Related
Mar 6, 2012
I created a path with the type tool, selected the path in the Paths panel, I started typing on the path and the type followed the path, though I chose edit > free transform path and scaled it, though the text did not move with the new path and now it is no longer on the path?
1. Why did the text not stay on the path as I transformed it?
2. How do you hide the path so you do not have to see it? I want it there only as a guide for my text to flow across.
View 1 Replies
View Related
Oct 10, 2013
I just purchased a new iMac and have been using Illustrator (CS5) for some graphic design work. However, it's driving me CRAZY because the type and shape cursors are a super small and a light gray in color. It's very difficult for me to track the cursor with my eyes when it is small and gray on a gray and white artboard. Is there some way to make the cursors more easily visible? As far as I can tell, this is only an issue in Illustrator.
View 2 Replies
View Related
Mar 18, 2013
My Type Tool does not select type by double clicking or click and drag. (Windows CS 5 V15.1). This is what I have tried so far and the problem still exists.
Check preferences for "Text": "Select text-object by path only" should be off. Checked. It was off. Didn't fix it.
Check the toggle for Show/Hide Edges in the View menu. Cmd(Ctrl)-H. Checked. Edges Showing. Didn't fix it.
Trashed my Prefeerences. Didn't fix it.
View 6 Replies
View Related
Mar 5, 2013
How do I use an Open Type font varient in Afx Path text tool?
View 1 Replies
View Related
Jul 2, 2012
Working on a poster in Illustrator. Have added area type, using the type tool. Now I'd like to increase the size of one line. I can't select or edit any of the type with the type tool. I moved the type to a new layer, saved, closed Illustrator, restarted my Mac (OS X 10.7.4). Looked in preferences, in case there's an issue there. No luck.
By the way, I also don't see handles when in the selection tool any more. Don't know if that's related.
View 2 Replies
View Related
Dec 8, 2013
Using CS5, upgraded to Mavericks onMacbook Air. The cursor shows up in selection, direct selection, etc. as a black arrow or appropriate shape. BUT it all but dissappears as an ultra-faint grey? symbol in type, line, rectangle! how to get the cursors to be black or darker?
View 5 Replies
View Related
Nov 5, 2013
i'm trying to build an easy way to create something like the following network graphic in Illustrator:
I basically want to create a brush or some other automatic method for adding a specific shape (in this case a circle) at every point a long a path. It would be nice if I could easily move around points on a path without have to move all of the circles independently.
I tried creating a pattern brush where the circles were the corner elements but depending on the angle of the corner the shape would get distorted.
View 6 Replies
View Related
Jun 9, 2013
I have to make an illustration with a 2D text that rolls on a 3D cilindric path. I don't know if is it possible on AI. Maybe I have to do this on a 3d software?
View 3 Replies
View Related
Dec 14, 2013
I want to put type on a perfect circular path.But first I need to stretch the type so it is longer vertically.Stretching type and using it as normal is easy.But how in the world do I use the stretched type on a path?
View 2 Replies
View Related
Sep 18, 2013
I'm working with a typeface that I need to stretch horizontally while following a circular shape. I don't want to distort it other than the horizontal stretching.
View 2 Replies
View Related
Feb 19, 2013
1.) The type "Mariners" sloping downward in an arc. I was able to get the Seattle part using type on a path on a circle and typing on top. Question is, can I also type Mariners on the bottom of that path? I recall that not being the case. Am I supposed to draw another circle over the one that Seattle is typed on and then on that one type on the bottom?
2.) For the stitching, am I supposed to create one stitch and then create a brush, draw a curve and then apply the brush to that curve?
View 3 Replies
View Related
Oct 1, 2012
I have a created a spiral path and added type to it. This spiral circles a planet-like object. This object is not completely circular, therefore overlaps some of the spiral. I would like the type on the spiral to wrap these protrusions. And I have tried the usual way of applying a text wrap (object > text wrap > make). The type on path doesn't seem to recognize the text wrap.
View 3 Replies
View Related
Sep 8, 2012
I'm using Illustrator CS4. I am unable to Create Outlines for a font after I had used the type on the Path Tool. I had used the ellipse tool to create a closed circular path, then I selected the Type on a Path tool. I selected my text using the arrow tool and ctrl-shift-o (Create outlines) and then I receive the message: "Can't Create type outlines." Not quite sure why this is happening. Did I miss something? The thing is this - my type is in the position and alignment that I want and I don't necessarily want to work with the Type as a Font but as vector shapes.
View 3 Replies
View Related
Dec 5, 2012
Trying to mask type with a vector pattern (place a vector pattern in a type clipping path), but nothing seems to be working. Never had issue before. Tried path in front, pattern in front, converting type path to compound path, converting vector to compound path. A couple of times it looked like it worked, but the pattern was invisible within the path. Illustrator CS6, on a Mac.
View 2 Replies
View Related
Jun 4, 2013
I need to change the direction of type on a path. Basically it is writing the sentence backwards right now. I need it to type right to left instead of left to right so the first word of the sentence will be all the way left instead of all the way right.
View 8 Replies
View Related
Mar 28, 2013
How come the width tool can ne used on a path made by pen tool but not brush strokes? Is a brush stroke not a path??
View 4 Replies
View Related
Oct 13, 2013
I'm in Illustrator 5.5 and my cursor is stuck on the pencil tool. I can't change the tool with either my mouse or hot keys. I can't even select all my artwork to paste into a new file.
View 8 Replies
View Related
Feb 12, 2011
I have been working in In-design for my classes and everything is working fine. But recently I needed to do some work in Illustrator but when I opened the program up, some of my tools seems to be slightly bugged or something.
The type tool will not make the anchor where I initially click. It creates the anchor around the center point of the type box. This is really annoying because if you have a specific grid, it will not line up to it. I have never adjusted this I don't think because now I have no clue on how to fix it!
Also, my pen tool seems to be messed up. I first create the starting point, but then when I make the second point and try to drag out the node arms to make a curve, it only has one arm! Thus, the curve never is created, so I can't draw with the pen tool, therefore I fail my classes..
View 11 Replies
View Related
Apr 15, 2013
I choose the vertical type tool or the vertical type on a path tool or the vertical area type tool...and all I get are letters that are rotated 90 degrees clockwise that go down in a vertical line. The effect is the same as if I took one of these lines that I am typeing here and rotated the entire line 90 degrees clockwise. That is not the effect I want. I am tying to get vertical letters stacked on top of one another in a line going vertical. I watched videos and they simply pick the tool and it functions this way, but when I pick the same tool I do not get this vertical orientation of the individual letters, but the 90 degree rotated letter.
View 5 Replies
View Related
Sep 8, 2013
When I select a tool, nothing happens...my cursor remains a useless white arrow! What is wrong??
View 6 Replies
View Related
Mar 9, 2014
I keep having issues with the text tool so here is what i did. I opened a new document, clicked the "Type tool", drew a box with it and starting typing, now everything was working as it should, while typing when i would get to the right side of the "Type tool" box i had drawn, the text would stay within the box and the next line would begin sorte of like this (asume the imaginary box is four spaces long):
aaaa
aaaa
aaaa
aaaa
aaaa
But then i started to do the same thing later in the project and the text would stay on one line and just disappear when it got to the end of the box, and i dont know how to get it working like it did before. When reshaping the box the text would stay the same size (was not a point type problem) but the text would basically just run off the end of the box and disappear, here is an example using the same text i showed above, but i'll use "b" to simulate the last four "a" lines which in this case the "b"'s will represent the invisible "a"'s. In this case the box is still four spaces wide and 5 spaces in height, but the text does not seem to acknowledge the box. And member i'm only using the "type tool", to draw these boxes, i'm not acutally drawing square shapes. Also i'm using Illustrator CC, and am using a mac.
View 3 Replies
View Related
Mar 20, 2014
I am using Illustrator CC under a subscription on windows 8. When I go to use the type tool it does not type. I will click on it, create a box or double click to have the horizontal blinking text line show up. When it shows up this time it is a dot and does not show type on screen. So for example I would be sitting here typing this message, but you would not be able to read it as it does not show up on screen.
View 1 Replies
View Related
Jul 27, 2013
This function was supposed to be available mid-June. Still, it isn't available or showing in my Illustrator CC, in the "T" type options.
View 3 Replies
View Related
Mar 13, 2013
I got CS6 Design Standard and the default type tool is "Right-To-Left Type Tool". I don't see the way how to change it. I managed to change the default type face and language for new documents but the type tool is switching back to RTL no matter what. How to change this?
View 6 Replies
View Related
