AutoCAD 2013 :: Scale Vertically Only?
Dec 16, 2013Is there a way in cad 13 to scale vertically only?
View 5 Replies
ADVERTISEMENT
AutoCAD Dynamic Blocks :: Scale A Block Vertically But Not Attribute Text?
Jun 3, 2013I have a block that I want to show on a vertical exaggeration of 10x. How do I make it so that a block has a Y scale of 10 without the attribute text inside the block being stretched in the Y direction 10x?
I would like to use a Y scale of 10 rather than a block with 10x the length because I have a field that returns a length parameter and I don't want that value to be 10x what it's supposed to be, and it would make things much easier to not have to multiply my values by 10x each time I use the block.
AutoCAD 2013 :: Scale Command Message - Extremely Small Scale Factor Ignored
Apr 13, 2012I have just updated to Autocad 2013. While working on existing drawings (previously created in V2012), I am having issues with the SCALE command. Most times, but not always, when I add a line or block, with a base point on an existing line or object and try to scale it, I get an "extremely small scale factor ignored" message, although I did not get a chance to enter a scale factor. While it appears most times, but not always, if I draw a new line in empty space on that same drawing, I am able to use the SCALE command without problems. I also have the same issue when trying to scale an existing line or block, most times but not always.
Here is a copy of the command line while I am trying to make it work:
Command: l
LINE
Specify first point:
Specify next point or [Undo]: 100
Specify next point or [Undo]:
Command: sc
SCALE
Select objects: 1 found
Select objects:
Specify base point:
Specify scale factor or [Copy/Reference]:
Extremely small scale factor ignored.
Command:
SCALE
Select objects: Specify opposite corner: 1 found
Select objects: Specify opposite corner: 1 found, 2 total
Select objects:
Specify base point:
Specify scale factor or [Copy/Reference]:
Extremely small scale factor ignored.
If you notice, it does not give me the chance to enter a scale factor. As soon as I pick the base point, it skips over to the error message, yet displays the scale factor prompt with a blank factor. I'm experiencing this issue on various files (not all but most), so I don't think it is a corrupt file. Why I get this and if I can correct it?
AutoCAD 2013 :: Scale Of Drawing Field Versus Scale Of Object
Jun 27, 2013When I open a new drawing in my AutoCAD 2013 that I just recently installed last week, I encounter a problem that I am not familiar with from previus versions of AutoCAD I have worked on. First of all, the units default to decimal, and I want them to default to architectural, with feet and inches. I have to type UNITS in the command line every time I open a new drawing in order to adjust this. I have AutoCAD for Architecture 2012 on another computer, and the program automatically defaults to architectural units upon opening up. Just to let you know, the program I am having this difficulty with is part of a package called Autodesk Building Design Suite 2013. I was under the impression that it included AutoCAd for Architecture, but I think it has only standard AutoCAD.
The scale of the objects I draw vs. the scale of the drawing field is very out of proportion. What I mean is, when I open a new drawing and draw a 30' -0" line, the line appears so long on the screen that I cannot see the whole object, even if I zoom out to the maximum. I should be able to see the object in it's entirety. In fact, when I draw a line that is only 12" long, even when the zoom is all the way out, the line looks huge in length. I have tried adjusting the units to the architectural/inches setting of course, and I have tried adjusting the scale in model space from 1:1 to 1/4'=1'-0", but nothing is working.
AutoCAD 2013 :: Blocks Insert At Large Scale In 2014 - Correct Scale In 2012
Nov 22, 2013I am trying to insert a block into a file in Acad 2014 and it comes in too large. If I insert the same block into the same file using Acad 2012 it comes in at the correct scale. Doesn't seem to matter if insunits is 0 or 1, or insunitsdefsource or insunitsdeftarget are also 0 or 1.
There must be some variable or variables I'm missing.
AutoCAD 2013 :: Block To Scale Based On Plot Scale?
Apr 19, 2013I have a block that i would like to scale based on the plot scale when plotting.
We set up our drawings full size and occasionally we want to plot them at half size. We do this by setting the plot scale to 1:2 (custom) in the plotting dialog. We have a few blocks that we want to print at the same size on paper, essentially become twice as big.
Is there is a way to fix the size or just set a few scale states and have them automatically adjust based on the plot scale (not drawing/annotative scale)?
AutoCAD 2013 :: Viewport Scale List - Zooms With Each Scale
Sep 6, 2013AutoCAD 2013 2D - when scrolling the viewport scale list, the viewport zooms with each scale instantly.
View 1 Replies View RelatedAutoCAD 2013 :: Change Global Scale Factor Or Current Object Scale In Specific Paper Space
Apr 10, 2013I have trouble figuring out dash lines. If i change global scale factor or current object scale in a spedific paper space,
the other page will be affected...
AutoCAD 2013 :: 2013 Viewport Scale Control?
Dec 28, 2012My units are set to decimal. In acad 2004, the dropdown list showed options like 1"=50' In 2013, it shows options like 1/32"=1'-0" How can I get it to display such as 1"=50' like before?
View 2 Replies View RelatedAutoCAD 2013 :: Export To PDF In Right Scale
Jul 14, 2013I have a drawings with drawer frame (margins left are 25 mm and rifgt, top and bot margins are 5 mm). I don't know how to export them in pdf in right scale. I always got cut off edges or i see outer line.Drawing example is in attachment i need to print it in a3 paper. Explain me whole process converting drawings to pdf on my drawing.
View 2 Replies View RelatedAutoCAD 2013 :: CTB File In Different Scale
Jun 25, 2013Relating to the printing, could i have a question which i posted in printing box but no response.
Question : Could we use 1 ctb file for all drawings or need to create separate ctb files up to drawing scale?
E.g. we create ctb file for 1:100 but when we use that for details 1:10, 1:5 it's quite light.
We can use scale line weight?
AutoCAD 2013 :: Insert Scale Bar?
Aug 22, 2013Is it possible to insert a scale bar? I have searched all over but the only instruction I got was to click insert scale bar in the annotation pallette, but no such thing exists. Surely this should be easy enough?
View 9 Replies View RelatedAutoCAD 2013 :: Scale When Printing From PDF
Nov 14, 2013So if I am in a layout page and I plot the sheet directly to our printer the drawing comes out to scale.However if I plot to PDF using DWG to PDF.pc3, and then print to printer it is always slightly smaller around 10% to 15% smaller.
View 5 Replies View RelatedAutoCAD 2013 :: Annotation Scale
May 19, 2012I am using AutoCAD 2013 and need to set my viewport scale to 1"=50'.
View 3 Replies View RelatedAutoCAD 2013 :: Dimension And Lines Scale
Oct 7, 2012when I draw a shape and add a dimension to it, the text and the numerical and the arrows of the dimension are small, so I have to increase the text height manually
how can I make it automatically scale itself?
also similiar thing with the lines, I tried putting a dashed center line on a shape, it looks solid but when I zoom it it does not.
how can I solve this?
AutoCAD 2013 :: Arc Offset By Distance And Scale?
Jun 24, 2013I am trying to find a routine that will allow me to offset an arc by a distance and to a scale.
The offest command is very limited as to how far I am able to offset without the boject completely vanishing.
I am trying to make a flat pattern from a cone or something close to it. The routines and programs that I have found do not quite accomplish this very accuratll. They are always off on the upper and lower arcs and on the distance between the arcs. Tho this would not completely sovle my problem, it would allow me to get the distance between the top and bottom correct.
AutoCAD 2013 :: Plotting Layouts To Scale?
Sep 25, 2012when i go to preview plot after selecting D size, scale isn't correct. how do i change to correct scale for plotting after i've scaled each view in paper space. please see attached drawing.
Any good free tutorial online about viewports and plotting from them and to get correct scale?
AutoCAD 2013 :: Scale A Viewport With Different X And Y Values?
Aug 13, 2013Is it possible to scale a viewport with different X and Y values? Kind of like inserting a block with different X and Y values.
View 8 Replies View RelatedAutoCAD 2013 :: Plotting To PDF With Correct Scale
Mar 13, 2013I've got a question about plotting to a measurable PDF with the correct scale.
Currently, if you plot to PDF (ARCH full bleed D 24x36 paper size) using 1:1 scale of the Layout area (including viewport, title block, etc) you get a nice PDF of the appropriate plan which would print to paper at the correct scale (1/16" = 1' 0'). If you set the plot scale to 1/16" = 1' 0' then preview/plot it then it appears completely tiny (like 2% of the page size), in the bottom left corner.
However, I want to make the PDF measurable. At the moment, if you do this using a 1:1 plot, the default numbers given by the measure tool are way out of proportion (a 29' dimension in the drawing is measured as 48,294 with no units). To get it to give accurate measurements, you have to tell Reader/Acrobat to ignore document scaling in preferences, then "Change Scale Ratio" to the appropriate scale ratio (0.625 in = 1 ft). This means you can measure to scale in Reader or Acrobat BUT these options disappear once you close Reader/Acrobat.
creating measurable PDFs from Autocad plots?
AutoCAD 2013 :: Different Scale In 2010 And 2014?
May 28, 2013I exported a DWG from sketchup, for version AutoCAD 2010.
When i open it in my office with 2014 the scale is correct. But when i send it to a colleague with verion 2010 the scale is different.
AutoCAD 2013 :: Line Type Scale
Jun 4, 2012I have a problem with line type scale for hidden line it appears different line type scale in another drawing, al though the setting for line type scale & Global scale factor is same for both the drawings. Is there any other setting for the line type.
View 5 Replies View RelatedAutoCAD 2013 :: Calibrating Scale On Imported PDF?
Mar 12, 2013I've imported a PDF file and I'm trying to do a quantity take-off by finding the area of certain areas (this is a landscape plan). However, I'm having trouble calibrating the scale so 10' on my plan is 10' according to AutoCAD as well.
View 2 Replies View RelatedAutoCAD 2013 :: Inserted DWG Block Out Of Scale
Nov 7, 2013I would like to solve a drawing insertion when I set the scale as 1 but when I insert the dwg, it looks smaller and the PROPERTIES box tells me that the dwg is .0364 in size.
View 1 Replies View RelatedAutoCad :: Change Scale Of DWG From 2013 Version?
Jun 10, 2013how can I change the scale of a dwg from AutoCAD 2013 version on 1'=1/4" into 1'=1/8" AutoCAD 2006?
View 4 Replies View RelatedAutoCAD 2013 :: How To Set Up Scale Of Known Distance On Photograph
Apr 23, 2013I am trying to set up a scale of a known distance on a photgraph that I have put in autocad. I know that this distance is 100mm, and have tried to work out how to mark this known distance, and then be able to work out the measurements of other dimensions in the photograph, including non-linear measurements. Is this possible?
View 2 Replies View RelatedAutoCAD 2013 :: How To Change Linetype Scale
Oct 23, 2012I have a problem between my template in inch and the one in mm.
Its the linetype scale that is wrong in the mm one, when i draw in the inch one, everything is fine but when i draw in the mm one, i have to set the ltscale to like 25 to see them at the same scale that they are in the inch one.
My guest is its because i've create my template for the mm one base on the inch one and i just change the unit type to mm. Is there a setting i could change that will arrange this?
Product Design Suite 2013
AutoCAD Civil 3D :: 2013 Scale List In Registry
Jan 28, 2013Having trouble finding the correct place to put the FEET, INCHES, METRIC, custom scales in the registry. I'm not sure if its any of the following or is it somewhere else now?
[HKEY_LOCAL_MACHINESOFTWAREAutodeskAutoCADR19.0ACAD-B000:409
[HKEY_LOCAL_MACHINESoftwareAutodeskAutoCADR19.0ACAD-B000:409AEC7.0AecBase70Scales
[HKEY_CURRENT_USERSOFTWAREAutodeskAutoCADR19.0ACAD-B000:409
[HKEY_CURRENT_USERSoftwareAutodeskAutoCADR19.0ACAD-B000:409AEC7.0AecBase70Scales
Civil 3D x64 2012
Win 7 x64 Ultimate
I7 3820 (3.6ghz quad core with HT)
32gig RAM (Corsair XMS3 4x8g)
Intel x z79 mobo (BOXDX79TO 2011 socket)
Radeon HD 7850 2gb GDDR5
AutoCAD 2013 :: Default Scale List Location?
Jul 17, 2013direction of where the DEFAULT SCALE LIST is stored in the C: drive?
I have set it up in the option tab and all is working, but will soon be installing several new PC's with AC and want to drop the stored file straight into the new PC's rather than having to type them out one by one on each PC.
AutoCAD 2013 :: Zoom Extents To 1 / 5.33XP Which Is 3 / 16 Scale
Apr 8, 2013Trying to zoom extents to 1/5.33XP which is a 3/16 scale (64/12=5.33). So evertime I try to zoom extents to 5.33 it will do nothing.
View 5 Replies View RelatedAutoCAD 2013 :: Setting Scale To Paper Size
Sep 17, 2012I'm drawing something much larger than the paper so I would like to chose paper size A(8.5x11) set the scale then print it out on A(8.5x11) paper. For example: my desk is approximately 65inch x 30inch and I want to draw and print it on A(8.5x11) paper. I want it to print with the drawing being accurate to scale...how do I do this?
View 9 Replies View RelatedAutoCAD 2013 :: Viewport In Layout Won't Change Scale
Aug 22, 2013I can't seem to change a viewport in layout view to show my drawing properly. No matter what I do the page only shows a very zoomed in view or a very zoomed out view. I have tried all menu options witht he word scale in, including the scale list. I have looked in the properties inspector.
View 5 Replies View Related