AutoCAD Civil 3D :: Different LandXML Format Outputs - Multiline And Single Line?
Mar 4, 2012
I have been outputting surfaces from Civil 3D 2012 using the LandXML export function. Some of the XML files that are output the data is on a single line and some of the outputs are on multiple lines.
Not a major issue as they both import back into C3D ok but within my office we edit the XML file slightly inorder to get it into another software package and require the multi line format.
The only difference I can see is the size of the data used to create the surface! All drawings have the same LandXML export settings..All surfaces have been created using a combination of point groups, breaklines etc..
View 7 Replies
ADVERTISEMENT
Nov 12, 2013
I am experiencing this issue every now and then and I don't know why or how it happens. No modifications to the BlockDefinitions or any BlockReferences are made and for some magic all multiline attributes in the drawing file revert to single line. After that happens the only way I know to fix them is to go through all definitions in the Block Attribute Manager and make every attribute multiline again. This is very annoying because I don't know how it happens so it can be prevented and because it takes time to fix them again. AutoCAD 2012 (Mechanical) on Windows 7 32 and 64 bits.
View 3 Replies
View Related
Jan 9, 2013
I've recently noticed that my multiline text boxes in old drawings have been splitting themselves into multiple multiline text boxes. They aren't exploding into single line text because it won't let me use the convert command to turn them into multiline because they are already multiline.
I know the dimassoc command can be set to a certain value to cause all dimensions to explode but is there some kind of command that could have change itself and is causing this problem?
View 3 Replies
View Related
Mar 14, 2012
Underlining the “single text” and “multiline text”
To underline the “single text”, we use the %%U but this sounds not to work with the “multiline text”!
What I should use to underline the “multiline text”?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 2 Replies
View Related
Apr 20, 2013
i'd like to turn single texts into a multiline tex and KEEPING THEIR INDIVIDUAL COLOURS & TEXT SIZES.
View 4 Replies
View Related
Oct 10, 2012
why I would get gaps in my grading from a single feature line? The feature line is at the same elevation all the way around and I am trying to grade to my existing surface at a 1:1 slope. No matter what I do it continues to leave out portions of the grading. I have attached a 3d image showing what's going on.
View 1 Replies
View Related
Aug 15, 2013
I have a Storm pipe network for a subdivision. All of the pipe are on the same layer, using the pipe style. For some reason, only 1 of 68 pipes will display through my viewports. All of the layers within the pipe style are thawed in my viewports, as well as the layer the pipes themselves are on.
Further, when I go back to an archived file from a few days ago, all the pipes are also on the same layers and styles, and all pipes display as they should through all viewports. There seems to be no rhyme or reason for this. I am not sure what could have changed as I didn't knowing adjust anything with the pipe networks since archiving a few days ago
View 5 Replies
View Related
May 31, 2007
I remember seeing an article or web cast on how to create a style to display a single line for a manhole. It may have been about using the parts create tool. But for the life of me, I can’t remember where I saw it.
Also I had created a style in C3D2007 to display the pipes in profile as a single line. This was done by drawing the flow arrow in a non printable colour over the top of the pipe.In C3D2008 this is no longer possible. So now what?
View 5 Replies
View Related
Apr 13, 2008
Getting odd results when importing pipe networks from StormCad v.8 via LandXML? I'm using the stand-alone version for C3D 2008. It always puts the outlet gound elevation at zero. Sometimes it puts the pipe centerline elevations at the rim elevations of the structures. Sometimes it reverses the pipes on their own centerline, causing really weird results.
I have opened every XMLfile with XML Notepad and checked that the data that came out of StormCad is correct. But something in the translation back to C3D 2008 goes haywire. I love C3D, if only I could be more confident of importing pipe data.
View 2 Replies
View Related
Jul 27, 2012
I exported my pipes from c3d 2013 to SSA 2013 but when I export them back to c3d via landxml the pipe network falls in wrong coordinates too far from my project area. same problem appears in c3d 2012
Civil 3D 2013 64bit SP1
Elitebook 8540w
Core i7 2.8GHz, 8Gig RAM
NVIDIA Quadro FX880
160Gb SSD
View 3 Replies
View Related
Apr 1, 2012
Any way to convert all of the single line text in exisitng drawings to multiline text without having to do them individually in Civil3d.
View 2 Replies
View Related
May 8, 2012
it's possible to manipulate the vertical line spacing of multiline attributes within a block?
View 0 Replies
View Related
Aug 27, 2013
Well I have a LandXML and I import the file into the SDB, it gives me line work but only Station Setups. I have no turned angles or points short of the Occupation Points. What is going on here. I have tested this in C3D12 on one PC C3D13 & 14 on another PC and have the same issue. However a co-worker imports to a student version of 12 using my template and gets points and lines.
View 8 Replies
View Related
Oct 9, 2012
I am trying to import a LandXML surface into my project. However, when I click the "LandXML" button in the "Import" tab, absolutely nothing happens. The command _AeccLandXMLIn appears in the command line, but there is no dialog box and no further action from Civil3D. How I can get this to work?
I ran into a similar problem with the normal "Open File" dialog box, and had to run a FILEDIA command to turn that dialog box back on. Is there a command like that to turn on and off the Import LandXML dialog box?
View 2 Replies
View Related
Jul 6, 2012
I am using Civil 3d 2011 and i have about 200 landxml files that I need to import into my drawing. Is there an easier way of doing this besides importing them one at a time?
View 1 Replies
View Related
Sep 19, 2012
Is it possible to edit a surface imported from LandXML with additional survey information (points and figures)? I would assume the tin could be edited and the new data included in the surface.
C3D 2011 (latest updates)
Win 7 Pro, 64-bit
16 GB RAM
View 1 Replies
View Related
Apr 17, 2012
I have not installed 2013 yet, and was wondering if you are able to Export to LandXML. And if you can, is previous version able to import that LandXML file?
View 2 Replies
View Related
Nov 11, 2013
I am in case to model a stormwater network contain ditches with irregular sections, open channels and closed pipes in SSA. I do not have access to IDF curves for the Project area. We got a weather station in site which is giving us continuous data from last 3 months till now. At this stage we just decided to use certain Rainfall intensity (mm/hr).
We got some check points to check the turbidity. What I need to know after analyse is i.e what is the flow at these points at 6:00 pm if we experience the rainfall from 3:00 pm to 4:00 pm with 20 mm/hr rainfall intensity.
So my concerns are with these available basic data, which method is suitable? and as long as we approach more valued data from in site weather station then which method will be the best. If i want to input time of concentration manually for each subbasin then how can i input TC of pipes or channels in SSA? URL....
where MATT said: "SSA does not calculate the Standard-Step method. The Rational Methods (including modified, and DeKalb) all compute the runoff to the inlet or junction. As soon as runoff enters the system, continuity and momentum calculations take over. SInce you are using Steady State Qin = Qout, so no routing occurs on pipes."
how do i understand the flow in certain points i.e 2 hrs after the rainfall is finished if I can not define TC for pipes or channels?
View 1 Replies
View Related
May 8, 2012
We are using Civil 3d 2012 with Topcon Data Collectors. Topcon will not read a profile created by using "create surface profile" command but it will read a profile using "Profile Creation Tools" command. We are not sure if this a civil 3D, Topcon or a LandXML issue?
View 1 Replies
View Related
Jun 8, 2012
I've created a surface into Civil3D by importing a LandXML file created from contours in a .dgn file. When I create profile views for the alignments, the elevations are shown negative (-500 to -20) where as they have to be in between 500 to 670. Also when I run the surface elevation analysis, all the elevation are shown in between 1000 to 2200 inches as shown in the figure attached.
Am I missing any conversion or some settings when importing the surface.
Windows 7 x 64
Nvidia Quadro 2000
24 GB Ram
i7 960 @ 3.20 GHz
Civil 3D 2012
View 6 Replies
View Related
Jul 10, 2013
I have created a surface and have exported it to LandXML for import into another software. After generation of the surface, I have cleaned up the surface triangles to eliminate triangulation outside of the area of interest. I have tried this both with deleting actual surface lines and by applying a boundary. After I edit the surface, I export it as a LandXML and bring it into my application where the surface still has the lines outside of the area of interest that I wanted deleted.
What I suspect is happening is that C3D is recording that the lines were deleted in the edits section of the surface, but that the actual lines are not deleted from the surface definition. My other software is not smart enough to figure this out from the LandXML file. Is it possible to finalize all the edits in C3D so that upon export my deleted lines do not transfer through?
View 3 Replies
View Related
Sep 28, 2012
Using 2010 Civil3D and trying to use "Reports" to print a point list and I am getting error:
Export LandXML is currently is currently not supporting the following drawing units:
Millimeters, Centimeters, Decimeters, Inches.
I have used the unit command to make sure I am in feet. Niot sure what else to look at.
View 1 Replies
View Related
Mar 21, 2013
We're working on a project which is causing me to question our management "system" (more like lack there-of). There are about 4 Existing Surfaces and 3 Design surfaces, and a half dozen or so drawings needed to show the various elements of this construction project. In the past we've done either copy and paste to show the same surface in different layouts or had a number of layout tabs. (Which quickly get pretty annoying if you're trying to show too much "different stuff" in each layout.
Looking at Data Shortcuts...we've never used them. When we have to make last minute changes everything automatically "updates" right? And the drawings should load faster and crash less because they're not so huge, right? The only Major Drawback I see is this: we use one person's workstation as the server" so two of us refer to the M drive path and one refers to the C drive path. Would this just screw everything up as it does when we have xref images? (Have to relocate the file path every single time the C drive person saves the file in order to see the image) I understand using "relative path" should fix this, but I haven't had much success with it.
And LandXML export/import, what exactly is the difference between this and a Data Shortcut?
View 6 Replies
View Related
Jun 18, 2012
how I can go about automatic creation of figures and existing alignment (i.e. Centerline and edges) using csv/txt file data format. Currently I have to snap each line to create Centerline, edge, figures etc. a headache of work! I am using Autocad civil 3D 2012.
View 3 Replies
View Related
Jan 22, 2010
We are creating a new company title block for the use in Inventor 2010 and AutoCAd 2010. It has initially been generated in Inventor and exported to AutoCAD. My problem is that all attributes that came over are now setup as multiline attributes and I can't seem to change them to single line. Therefore you have to open the multiline editor separately for every single item to make changes in lieu of just 'tabbing' through the values in the Enhanced Attribute Editor. This adds time and frustration and seems to be intolerable for some of my colleagues.
Is there a way to change the attributes to a single line in AutoCAD I'm just not aware of? I tried to find different settings for the export from Inventor but the options seem to be very limited.
I could probably go over this and create separate AutoCad only titleblock and border but that would kind of defeat the purpose.
View 9 Replies
View Related
Mar 20, 2008
We have an employee in our office that is kind of old school in some ways. That person has a habit of exploding everything possible in a drawing. Most of us create notations using mtext so it's easy to edit and manipulate. Is there a way to convert the single line text back to multiline after it's exploded?
View 9 Replies
View Related
Apr 11, 2012
I have a number of drawings that i need to change the revision numbers, insert the date, the reviewer, etc.... I have been doing this manually but it takes heaps of time. Is there an easier way to copy and paste multiline attributes from one block to the same block used in other drawings (each drawings has the same block and attribute titles). One problem is that i cant simply copy the entire block as the drawing number, reviewers, titles etc are different in each drawing.
View 1 Replies
View Related
Oct 21, 2013
How to convert gif photos to jpeg photos with photoshop 11?
View 1 Replies
View Related
Oct 7, 2011
I need to convert single-line text into multi-line text (AutoCAD LT 2009). Will this version allow you to do so?
View 2 Replies
View Related
Dec 14, 2011
I know that there was a command that would convert single line text to multi-line text but I can not find it. It use to be tt2mt or something like that.
I can not find this command in the help either. Did they get rid of this command like zoom center?
how to take multiple single line text and add them together into one multi-line text?
View 5 Replies
View Related
Oct 31, 2012
How can I add single line text to my CAD drawing? I use DTEXT command, but there is no option to enter text height. CAD only asks me the rotation angle of text and then blinking cursor appears. If I type something, text gets so small it's almost invisible. Only option for me now is to scale but it takes too much time and too many clicks to get my text to wanted size. Why AutoCAD doesn't ask me for the height?
View 9 Replies
View Related
