Illustrator :: CC - Layers - Row Size Resets On Program Shutdown
Oct 3, 2013
In illustrator I like my row size to be at 50px in size. Every time I close down AI and reopen it later it seems that the layers have reverted back to their default sizes (I think its like normal or somthing cartoonishly small)
To get to the option panel I'm talking about, bring up your layers in AI then in the top right drop down menu select Panel Options at the very bottom of the contextule menu, and in that window the top options are "Row Size".This is where I pick "Other" and then set it to 50px (every time).
View 1 Replies
ADVERTISEMENT
Oct 24, 2013
photoshop CC, the program, shutdown directley.How can I run photoshop cc without shuting down?
View 1 Replies
View Related
Oct 17, 2008
I have Photoshop CS (version 8.0) running on Windows XP Home (SP3). I searched the help files, FAQs, and the forums and didn't find anything related to this.
Today I opened a document I've been working on, created a new layer, picked a default 9 pixel hard round brush, and when I clicked on the canvas to paint I got "could not complete the task due to a program error" and right after this Photoshop shut down.
I ran my anti-virus, but the computer is clean. I then checked all the brushes in my Photoshop folder to see if there were any odd ones in there - there weren't. Then I closed PS and when I opened it again I held down Shift+Ctrl+Alt to reset the Prefs file. I created a new document and reset the brushes, then I tried once again to paint with a default brush. Again I received the same program error and PS shut down.
I uninstalled PS and reinstalled the program. I restarted my computer and opened PS and tried painting again - the same error, only this time PS didn't shut itself down.
I'm at a loss here. I know Photoshop can have some psychotic moments, but this is the first time I have encountered this weird behavior. If anyone can give me some suggestions on what might be happening and how to remedy it I would appreciate it.
View 11 Replies
View Related
May 19, 2013
CS6 not only shuts down itself, it shuts down my computer. I have a high-end graphics card (which I specifically got to run my photo-editing monitor), i7 processor, Win8, 64-bit, high resolution. It always happens, without fail, when I choose a large size brush or whatever tool in cloning, spot-healing, dodging, burning, etc). Otherwise, it runs fine. But if I choose a large brush, etc, it only shows me a half circle instead of the full circle, freezes PS, shuts down my computer, and then the computer re-starts.
I used this same PS program on my previous Win7 64-bit computer, which had far less capability, processor, graphics, and other credentials than this current one. It has nothing to do with having other apps running because it happens regardless. It has nothing to do with Bridge because I don't use Bridge. It happens every time as described above. When the computer boots itself back up, there's an option for me to send the notice of the error to Microsoft, which I've done about 50 times. Could it have something to do with Win8? Hope not, because I checked before I (regrettably) got a computer with Win8 to make sure Photoshop was compatible with Win8.
View 7 Replies
View Related
Apr 12, 2013
I have successfully saved my file, shut down Photoshop without incident, and yet upon opening CS6 it starts opening the latest autorecovery file. I need to have autorecovery on for the work loss protection it provides, but it can get confusing to have an Autorecovery file open instead of the file I had meant to open. ( This is also happening on a colleague's computer.)
I'm running Mac OS X version 10.8.3
2x2.66 GHz 6-Core Intel Xeon
64 GB 1333 MHz DDR3
CS6 Version 13.0.4
It's happened several times with a variety of files. They are all Grayscale layered PSB's, in the 1.5 - 3 GB range.
View 2 Replies
View Related
Jul 23, 2013
I am just starting to learn C# and .NET and I am trying to write a simple program to gather all the layers from a drawing in a directory, save them to a list, and use that list to change those layers to the appropriate layers. The way I want it to iterate is open the first drawing, gather the layers, ask the user which layer they want to change the original layer to, and when they select the new layer, it associates that old layer with the new layer so that in the future it won't prompt the user, it will just change it to that layer. Then it changes the layers and goes to the next drawing.
I wrote something very simple in LISP, but I need to make it more advanced and try to add in more features. Specifically I would like to be able to do everything in the background, without actually opening the drawings so I can avoid any user prompts or dialogue boxes.
I am at a complete loss at where to start though. There are so many members in the different namespaces for Autocad. Right now I am looking through acdbmgd.dll and acmgd.dll to try and find something useful, but I have no idea where to even start.
My guess would be to first define a method that gathers the layers from the drawing and saves them to an array. For example i would have multiple arrays for the different layers to which I want to convert the old layers, string [] 0layer, string [] walllayer that contains all of the layers to be changed to layer 0 and wall layer. Then I would compare the layers in the drawing to those arrays, if they are not present in any of the arrays, the program would prompt the user and ask which layers they want to change the existing layer to and add it to the appropriate drawing. Then all of the layers in those arrays would be changed to the different new layers.
At the very least, I am going to start making the different arrays to be filled. That much I can do. I'm just having trouble actually getting the data from the drawings.
View 2 Replies
View Related
Dec 31, 2013
I am just learning Illustrator. I use a PC at work, and a laptop at home. I have several layers of text in my document. The text is larger on my laptop than it is on my PC. The "character information" doesn't change (if it's 100 on my PC, it's 100 on my laptop), and the placement doesn't change, just the size of text. All other items such as placed objects and drawn graphics stay the same. I have been saving the file into a server folder, then copying it over to my laptop desktop at home. Have not had this happen in Photoshop or In Design. Is this a document issue, a preferences issue or a font issue?
View 2 Replies
View Related
Jan 13, 2014
To summarize: It seems that compounding a path resets the rotation of the gradient to it's original degree of rotation.
Detailed version:
1. Create a shape.
2. Add a gradient fill. Note it's degree of rotation. Let's say it's set at 10°.
3. Now rotate the shape by any means (transform or rotate tool). Note the gradient degree of rotation has shifted the same amount as the shape was rotated (if it was rotated 50°, the gradient will show at 60°).
4. Make it a compound path.
5. Instantly the gradient shifts back to it's original degree of rotation of 10°.
It appears that when rotating a shape with a gradient, the rotation of the gradient is locked to the rotation of the shape. But when making it a compound shape it releases that lock and "remembers" it's original state. But that is only true as soon as you make it a compound path, but if you no go ahead and rotate it just a bit using the cursor (as opposed to selecting transform > rotate), the gradient will switch back to how you would expect it to rotate in the first place...
Workaround would be to make it a compound path before rotating the shape at all.
View 1 Replies
View Related
May 9, 2013
I would like to increase the font size in many text layers at a time by selecting them in the layers panel. The font increases, but the text boxes don't expand to fit the increased size text. So I am having to make each box bigger manually. Is there a way to have the boxes expand to fit bigger text automatically through the layers panel?
View 2 Replies
View Related
Aug 20, 2013
When I have an PSD icon set and I want to size a layer to a size that looks good. How do I see the dimentions of that layer so that I can select another layer and make it the same size.
View 4 Replies
View Related
Jan 24, 2013
When I am trying to use the effect options with in the layers palette I get the annoying message:
' Could not complete your request because of a program error. '
It was working fine then it went funny. I have restarted photoshop, my machine and re-installed the software but stiill not fix.
View 2 Replies
View Related
Oct 17, 2013
The fonts on the menu (File, Edit etc) are way too small in comparison with other programs on my desktop. Is there a way to enlarge them? Adjusting the screen resolution is not an option. I have noticed this with previous version of Xara that I have used. How to do this if it is not in the program settings?
View 9 Replies
View Related
Mar 27, 2013
I created a short project of two clips of 640 x 480 avi clips with no transitions in VideoStudio Pro X4. I created a media file output and chose the option "same as the first clip." The file created was about 39 MB. Everything was good.
Then I created a media file using the option "Project Properties" and the file size ballooned to about 354 MB, even though I set the Project Properties to the same values as the original clip!!
I need to use Project Properties. Otherwise, when I add transitions, during the transitions the video size changes to widescreen for some reason and the picture looks stretched out from left to right, until after the transition, when the video goes back to 640 x 480.
How can I use the Project Properties option when creating the final media file and not get huge files, or how can I use the "same as the first clip" option and keep the transitions the same size as the first clip (640 x 480) instead of switching to a wide screen mode?
View 14 Replies
View Related
Mar 2, 2012
I am using Photoshop CS5 with all current updates installed on a Mac running Lion. I am having a problem with the handling of the camera raw format (specifically .arw) and how Photoshop handles the format.
My first issue is that upon loading the format into Photoshop, the program is cropping a bit of the image from both the left and the right. I have not found a way to stop this from happening.
Another issue is file size. A client is having issue with the file size presented. They are providing me an ARW file that is 14.8 MB and I am making edits and provided them with a large jpg from photoshop (jpg qaulity turned all the way up) and they are getting a jpg at 9.7 MB. They are concerned that I am giving them a less than quality result.
I know that any conversion from a camera raw format to a high resolution jpg will result in a lower file size and that has been explained however the client has taken the raw format parsed it through Mac Preview, saved it, and resulted in a larger file size than I could provide in Photoshop.
This then becomes a confusing situation to handle.
Questions:
a) How to explain the lower file size happening in Photoshop to the client (what is lost?)
b) Why they can use mac preview and get a larger file size that I can at full resolution jpg in Photoshop?
c) Is there a way I can make this client happy without moving to a tif file format?
d. Why is Photoshop cropping the .arw file?
View 6 Replies
View Related
Oct 7, 2012
I'm running ACADLT 3102 on a new Dell xps and the monitor is set to the recommended 1366x768 screen resolution. When certain menus like hatch open up, the bottom of the menu area is off the screen, there's not scroll bar and no way to move the menu up to hit the ok or cancel buttons. I've been getting around this by going into the control panel and changing the screen resolution, then finishing the hatch command, and waiting for the default screen resolution to take over again!
Is there anywhere in the program to change the size/shape of the command screens?? Can't find anything in Options>Display....
View 8 Replies
View Related
Aug 28, 2012
just downloaded Paint.net recommended by our IT manager. I need to be able to print an image 5"L x 1.875"W. I figured out how to resize in the program, but it still prints full size.
View 1 Replies
View Related
Jan 31, 2013
Is it possible to make the program to stop rounding when I try to set the image size? I'm putting in a size that is like 4.569 and it rounds it to 4.57 and I don't want it to round it.
View 2 Replies
View Related
Apr 19, 2009
I start Photoshop CS3 some of the preferences set themselves back to default even though I set them to soemething else the last time I opened it. What annoys me the most is the navigator window which resizes itself every time.
View 8 Replies
View Related
May 16, 2013
My Lightroom 4 reset itself last night to the original - all customization, presets I created and purchased, all images are gone.
View 7 Replies
View Related
Sep 24, 2012
My monitor is calibrated with Spyder2. Every time when I start Photoshop and open file (new or existing) my calibration info is gone. I have to apply color calibration for my monitor again. Why Photoshop resets my monitors color calibration info and how can I avoid this?
View 10 Replies
View Related
Jul 25, 2008
when I start my Photoshop, everything resets to the default settings, from workspace to general preferences. Why does it do this and is there a way to stop it from doing it?
View 7 Replies
View Related
May 28, 2013
Since I started with the 2014 version of 3dsmax Design I have serious troubles with the Viewport Clipping settings. The yellow arrows 'resets' about 90 percent of the times when I change viewport and sometimes also when I attach objects together. Ideally the top arrow should be below the top yellow line in the viewport setting and the lower one above. What I mean by that they 'resets' is that the top one for no reason goes all the way to the top and the lower goes all the way to the bottom. The result is a very weird looking viewport. Sometimes both goes to the top or bottom and the whole scene is invisible.
If I had been new with 3dsmax I had given up a long time ago not understanding why my hole scene either disappears completely or looks weird. I consider going back to 2012 now since its frustrating adjusting the clipping arrows every minute. Slows down my work.
View 2 Replies
View Related
Jun 21, 2013
I'm working on a rather complex piece of artwork in Illustrator CC with the latest Mac OS, with several objects on each layer.
Whenever I click an object, its layer in the Layers palette auto-expands, pushing all of the main layers off of the edge of the palette. I then have to click the little arrow to collapse the layer so I can see all of the other layers and (quickly?) get to the one I need.
I am using a Magic Trackpad (don't ask) so this task is particularly arduous, as the cursor is often somewhat difficult to maneuver when attempting to target small UI elements. My display height is only 1050 px, so naturally I would rather not make the layer thumbnails any smaller (25 px.)
Is it possible to disable or defeat the auto-expanding behavior? Placed in bold
View 2 Replies
View Related
Oct 5, 2012
Why in the heck do Macs show layers in a PDF that are HIDDEN at the time of saving if "Create Acrobat Layers from Top-Level Layers" is checked is checked -BUT- PC's don't??
I just proofed a business card with my boss accidentily showing him some type on a layer that was hidden. He approved it. Now I have to make a bunch of type set up in very tight margins work in production.
View 1 Replies
View Related
Jul 18, 2012
Is there a way to collapse all layers in the layers panel with one click?
View 1 Replies
View Related
Mar 18, 2013
every time I restart my PC, the layout in Bridge resets. Starting Bridge as an Admin doesn't work.
I'm running Photoshop/Bridge CS6 on Windows 8 (64bit)
I put in two screenshots to show the before and after:
It isn't a big deal, but it's annoying to reposition everything after every restart
View 6 Replies
View Related
Apr 28, 2012
For some odd reason Autocad will not maintain my workspace customizations. For example I typically can customize my workspace by toggling which toolbars are shown and where they are placed. Then I can close autocad and when I start it again all the customizations are present. Now when I start autocad it loads the default workspace. I should have to customize my workspace every time I start autocad. I also shouldn't have to create any custom workspace profile or anything like that. AutoCad used to simply save any GUI customizations made automatically. I need it to get back to that.
View 9 Replies
View Related
Oct 13, 2011
direc3d 9 resets to defaults. annoying, everytime i start max- have to set to my prefferences (anisotroping and texture sizes)
direct3d 10 "display all triangle edges" on/off makes no effect, i still see all triangles, that confuses "use cashed drdx meshes" removes those triangles but they appear entering polygon editing on some files those two checkboxes seems to have no effect at all, i see lots of triangles i dont want or need to see
mobile ati radeon 5650 latest drivers,
8gb ram,
intel i5 cpu (swithcable graphics, yes, i work with ati graphics card! not intel
max 2011 64bit design SP2
win 7 64bit
View 2 Replies
View Related
Jul 26, 2011
I finally installed Revit 2012. The first order of business was customizing the QAT to include everything I regularly use, and appear below the ribbon.
However, everytime I close/reopen the program, it resets and loses everything. It was not an issue in 2011.
View 3 Replies
View Related
Dec 13, 2013
Running Autocad Architecture 2014:
I am running into a problem, I like to use the annotative line type scale when I open the drawing i have to set the MSLTS to (0), and PSLTS to (0), LTS is already at (0). When I set these settings then save the drawing (saves as autocad 2013 version), close it down and re-open it the MSLTS and PSLTS settings reset back to (0). I've tried everything to get these settings to save but nothing works.
I want to keep these settings MSLTS (1), PSLTS (1), and LTS (1), after a save and re open they reset to (0)
View 2 Replies
View Related
May 18, 2012
I have the new cs6 master collection and all programs work well and don't cause problems when I shut down my iMac except Photoshop. If I use photoshop, anytime I try to shut down my computer all I get is a spinning wheel and computer will never shut down. This happened on cs5 as well and thought newer version would fix problem but it has not.
View 2 Replies
View Related
