AutoCAD LT :: 2012 - Fatal Error Message At Program Start?

Oct 15, 2011

I am running acad lt 2012 on windows 7- at acad startup I am receiving a fatal error message

"unhandled access violation reading 0x008 exception at 4135104h"

Windows updates are all current.

View 1 Replies


ADVERTISEMENT

AutoCAD LT :: Fatal Error Message When Saving Drawing In 2012?

Apr 15, 2013

We have AutoCad LT 2012 version. We encounter fatal error when we save the drawing. we cannot finish our job because everytime we save our work it will show a messsage FATAL ERROR.

View 5 Replies View Related

AutoCAD 2013 :: Fatal Error On Start?

Jan 4, 2013

I have a user with AutoCAD 2013 installed on his work laptop.  It is a Dell with Windows 7 64-bit.  We don't have local IT any more and he was having problems with the computer, which is only 6 months old, so he had to send it from Michigan to Massachusettes, where our Global IT resides.

They "Imaged" the hard drive, installed a new hard drive and put the "Image" on the new hard drive.  and sent it back without making sure things worked.

Now when he starts AutoCAD 2013 (vanillia), the Splash screen comes up and then he gets a Fatal Error.  I have attached a capture of the error.

When he first got it back there were no drivers installed for his nVidia Quadro 1000M card, so he could not use his 2nd monitor.  He found the driver and installed it and now he can use the 2nd monitor, but still had the problem with AutoCAD.

View 3 Replies View Related

AutoCAD 2010 :: Fatal Error Message On Opening Files

Dec 2, 2012

I've been getting this fatal error message upon opening files. 

It seems to be as I try to load x-ref's. 

View 1 Replies View Related

AutoCAD 2013 :: Fatal Error On Initial Program Run

Nov 13, 2012

I installed AutoCAD 2013 successfully, but when I open the program for the first time, it displays the following message and aborts the program:

FATAL ERROR: Unhandled Access Violation Reading 0xffffffff Exception at e9690004h.

What can I do to resolve this problem?

View 3 Replies View Related

AutoCAD 2010 :: Fatal Error Message / Unhandled C0000417h Exception At 71a252c0h

Jul 3, 2013

i am getting a fatal error message when i try to open a file, any file.  the message is   unhandled c0000417h exception at 71a252c0h  

View 1 Replies View Related

AutoCAD 2013 :: Fatal Error On Modifying Hatch - Program Shuts Down

May 9, 2012

When ever I try to modify a hatch from a previous version I get a fatal error message and the program shuts down. I have opened the same files in 2012 and have no problem changing the hatch patterns.

View 1 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Quick Properties Customization - Fatal Error Message

Nov 4, 2013

I am trying to customize my quick properties (acad.cuix), but i keep on receiving fatal error message. And when i click on quick properties it is all blank. Also, the Properties dialogue box is not working when i click on something, the properties do not appear on the Properties dialogue box.  Attached is the error message.

View 3 Replies View Related

AutoCAD LT :: Raster Images Creating Fatal Error With 2012?

May 7, 2013

I am working on a project that requires a number of raster images to be compiled in a base file and then x-ref'ed into titleblock sheets. The base file is not giving me any problems but the files it is x-ref'ed into keep giving me fatal errors and shutting down AutoCAD. I am working in 2012 LT. I was able to find a HotFix for this problem for 2008 but have not been able to find a fix for my version.

View 2 Replies View Related

AutoCAD LT :: 2012 - Fatal Error / Numbers Differ Between Drawings

Nov 27, 2011

I have a set of drawings that are dwg's that have a dwf referenced/attached in. When I try to print, I get the following error.

FATAL ERROR: Unhandled Access Violation reading0x2573d000 Exception At 4f6c133fh (the numbers differ between drawings) I can plot all other CAD files with no problems, just this set.

View 9 Replies View Related

AutoCAD 2010 :: Won't Start Up On Windows 7 64-bit Error Message - 0XC0000076

Apr 20, 2012

Autocad 2010 won't start up on my new windows 7 64bit system. I keep getting error msg Error msg : 0XC0000076 when I try to lauch the program

View 1 Replies View Related

Photoshop Elements :: 9 Error Message - Cannot Use Clone Stamp Due To Program Error

Jan 6, 2013

In Elements 9 I now get an error message "Cannot use Clone Stamp due to program error".

View 1 Replies View Related

Photoshop :: Start Up Error Message CS4

Oct 21, 2008

Each time I start CS4 I get an error message "Could not load the Adjusted Refresh module because it does not work with this version of Photoshop". There is no option not to show the message in future, and I cannot find where to disable the module.

I am running a CS4 upgrade from CS.

View 3 Replies View Related

Lightroom :: 3.6 Won't Start And Get Error Message

Jun 3, 2012

LIghtroom 3.6 won't start and get the following error message "Lightroom - Opening Catalog: untitled (27 0f 42).jpg.lrcat."
 
I have uninstalled Lightroom and re-installed and still get the same error.

View 1 Replies View Related

Xara :: Error Message At Start Up Designer Pro X

Jul 21, 2012

Just got my Designer pro X CD in the mail, installed but Xara won't start I get an error message at start up." This application requires CPU support for SSE2 but this CPU dose not support it. "I am on Windows XP, AMD XP 2800, 2GB Ram.

View 9 Replies View Related

Paint Shop Pro :: X3 Won't Start Up And Induces Old WP Error Message

Jun 21, 2011

I cannot get PaintShop Photo Pro X3 NL to start up anymore. Windows Task Manager shows PSP to have started up - as a service only. In the meanwhile, I do get this error message:

[Webbrowser:]
["Cannot find ...:/Users/Kanis/AppData/Roaming//Corel/Messages/540229901_907002/EN/MessageCache...
Check path of the internet address."]

(I'm running my PC in Dutch; so I translated it as correctly as possible).

This message appears from the very instant that I installed Corel WordPerfect X5 on my system, i.e. February 8, 2011. Then I uninstalled WP X5 completely. However, the above message keeps appearing, whenever I try to start Corel PaintShop Photo Project Creator or PSP X3.

In order to keep on going, I installed PSP X3 on a virtual machine on this PC (O/S: Windows XP 32 bits SP3 under VMware Workstation 7.1.4 ( under host W7 Ultimate 64 NL)). It works fine from the beginning, but this is not meant to be. Therefore, on June 6, I tried a fresh reinstall on PSP X3 on the main operating system (W7 Ultimate 64 NL). The problem persisted, as before. I then uninstalled ALL Corel applications from that system, went through the entire register and deleted all traces of Corel, PSP X3 and WP X5 applications. Expelled also all traces of PSI-Service related items (also from the register). Then I made a fresh reinstall of PSP X3, and it worked. Eureka ? Until this very morning. Same old story started all over again. So obviously I have not found the root of the problem. It must have been masked for some time. What is the source of the error message? And how come it causes PSP X3 to start as a service only, and not continue. Note: note even the start-up screen of PSP X3 does show up.

View 2 Replies View Related

Photoshop :: CS6 And CC Program Error Message?

Nov 27, 2013

I installed a new drive (OWC Accelsior SSD) via PCIe in my 2009 MacPro then loaded 10.9 on the new drive.   While I have regret about 10.9 due to the Colorflow bug, I had already done the upgrade on the old drive and stayed with 10.9
 
I then ran Migration Assistant to copy everything to the new drive.In addition, I ran Verify Disk on both the old and new drives via the Disk Utility and all was OK.After the migration, CS6 13.0.0 will not allow me to open a file from any internal or external drive.  When I select File, Open the error message states, "Could not complete your request because of a program error".
 
When I select File, Open 2-3 times, I am able to open a file but only from the Desktop.  After trying 10 File, Opens, from the Desktop with sucess, I tried selecting an external drive and immediatly get the program error message againI tried selecting internal sata drives, an external Raid 5 connected via eSata and a drive connected via USB3 but all produced the same error message.
 
So I installed CC.  Unfortunately the same exact problem occurs.I noticed when I was installing CC that there was an update to CS6 13.0.0.  But when I tried to update via the iCloud installer and also the download from the Adobe site ,the update failed with this message, "Errors encountered during installation (U44M1P7) I have found an inconvenient workaround that might offer a clue in that I am able to open any file from any drive if I drag it over the icon in the dock.  That works for both CS6 and CC. 

View 5 Replies View Related

Photoshop :: Program Error Message On CS3

Mar 5, 2009

Just downloaded CS3 to new computer. I get a message "cannot use because of program error" when opening the clone tool.

View 1 Replies View Related

AutoCAD Civil 3D :: 2012 - Error Message When Trying To Add A Line To A Surface

Jun 19, 2012

Just trying to clean up a surface.  I can swap edges fine.  This project was a 2009 project. 

View 1 Replies View Related

AutoCAD Architecture :: Desktop 2012 Section Error Message?

Apr 26, 2013

When trying to cut a section in ADT 2012 I get the following message:

Command: _AecVerticalSection

Command not allowed because drawing contains objects from a newer version of this application.

How can i get ADT 2012 to cut the section i need?

View 2 Replies View Related

Photoshop :: Error Message On Close Down Program

Dec 13, 2012

When i close the program I get an error message memory at '0x234fd01' could not be read

View 3 Replies View Related

VideoStudio :: Error Message That Shuts Down The Program

Dec 29, 2010

I thought i was getting this message when i enabled ripple select all but now i am randomly getting this message anytime i am using VS. I use VIDEOSTUDIO PRO X3 and i believe i have updated the necessary updates for it . After i get this message, it shuts down VS and i have to restart the program.

View 6 Replies View Related

AutoCAD Architecture :: 2012 Crash With Empty Error Message On Exit?

Jun 27, 2012

When a user closes ACA 2012 (sp2)he gets an empty crash message.

We are running win7 64bit.

View 2 Replies View Related

AutoCAD Inventor :: Error Message File Needs To Update When Opening 2012

Oct 20, 2011

OK then update. I select never show this message agian ever (my favorite ) - but guess what a it pops back up. Nothing is wrong with the assembly

View 1 Replies View Related

Lightroom :: Error Message - The Application Was Unable To Start Correctly (0xc000007b)?

Jun 8, 2013

'The application was unable to start correctly (0xc000007b). Click OK to close the application.'I receive the error whenever turning on my laptop, and have ever since installing Lightroom4

View 1 Replies View Related

Photoshop :: Adding Shape - Program Error Message In CS6

Sep 28, 2012

I downloaded CS6 and everytime i try to add a shape I get a program error message

View 4 Replies View Related

Photoshop :: CS6 Cannot Open File - Message Says Program Error

Nov 29, 2013

can not open file, message says  "program error"

View 3 Replies View Related

Photoshop :: Getting Unable To Use Shape Tool Due To A Program Error Message?

Aug 2, 2013

Im getting 'unable to use shape tool due to a program error' message??

View 3 Replies View Related

Photoshop Elements :: Runtime Error Message And Program Closes

May 22, 2013

All of a sudden, Photoshop Elements 9 has stopped working.  I receive a "runtime error" message and the program closes.  Do I need to do a reinstall?

View 1 Replies View Related

Photoshop Elements :: Serious Error Message Box Displayed And Program Forced To Shut Down

Oct 30, 2012

Installed Elements 10 today. When browsing for a destination folder for very first project a "Serious Error" message box is displayed and program forced to shut down. What is this and how do I fix??

View 1 Replies View Related

3ds Max :: 2012 Won't Start / Freezes On Start Screen?

May 15, 2011

I just installed 3DS Max 2012 with a student license, but I encountered a problem that doesn't seem to go away. Whenever I open it, it gets to the "Starting 3DS Max 2012" screen and then freezes. The process freezes as well. Is there a way I can fix this? I have Windows 7 Ultimate, 32-Bit, and a Dual-Core Processor. My computer meets all the System Requirements except an insufficient video card.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved