I try to start msaccess in runtime mode, but an .accdr will not start.this is the code try to use, without /runtime in the code the .mdb and .accdb works great
(startapp "C:\Program Files (x86)\Microsoft Office\Office14\MSACCESS.EXE" /runtime path)
I am having a problem with starts and ends of lines. I have draw two lines, end of first is start of second. The problem is because, (cdr (assoc 11 (entget line1))) and (cdr (assoc 10 (entget line2))), somehow, are not the same,
(= (cdr (assoc 11 (entget line1))) (cdr (assoc 10 (entget line2))))
is returning nil, what is so confusing to me is that:
(=(nth 0(cdr (assoc 11 (entget line1)))) (nth 0(cdr (assoc 10 (entget line2)))))
is returning true, the same is for y and z coordinates.
I need to check x y and z coordinates, for this type of problem...
I woluld like to use visual lisp to get data from ms access.
I know how to connect to Excel, but is there a similar connection possible for access ?
Is there a function to obtain the start angle and end angle of a pline, i know arcs do.
View 4 Replies View RelatedACAD 2009 on XP
Third party software installed which now causes AutoCAD 2009 to crash when a single key is pressed. We have uninstalled the software, however the editor is still looking for the
Non-existent ARX. This is the problem. What file or registry key declares the list as shown in APPLOAD? I have verified 2009 works in the administrator profile.
We also did a repair and then a reinstall of 2009 to no avail. What steps are needed for AutoCAD to build a profile when a previous profile existed?
can you start autocad with no drawing open ?
i would think that some type of script would work or could you change your target on a shortcut?
My first lisp, so bring it hard on me I want to be an expert in autolisp .
My lisp is meant to do the following:
draw a rectangle with ”0” fillet. It can be done either via rectangle command, or pline command. The attached lisp has the variant with the pline-case.
The, I need to draw inside a smaller rectangle, with a fillet value, that is promoted and indicated by the user. The smaller rectangle must be centered inside the bigger one. I thought it was a good idea, to take one insertion-point for the bigger rectangle.
and to calculate a 2-nd insertion-point for the smaller rectangle, via "polar" function.
What I get:
the 2-nd insertion point is put the same as the 1-st one.
I wish to draw the bigger rectangle with one layer "example: Layer 1", and the smaller rectangle with another layer "example: Layer 2".
Using Lisp or VLisp, how can I find the Start & End Point of an AEC_WALL ent. ?
View 5 Replies View RelatedI'd like to pass and existing set of selection to a command like laylck, which asks for selections after beginning the command.
It must be possible to do this. Some CUI setup, lisp routine?
I am wanting to use autolisp to access the text in a MTEXT entity. assoc(1) gives me the first bit of text, but not the rest.Is there a way to use assoc to access each of a number of matches or do I need to write my own routine to find all the 1's?
View 5 Replies View RelatedCan't you access the block definition via ObjectDBX.
(without the dwg file being open)
I am parsing through the blocks to find all the xrefs.
When I get to an XRef... I don't seem to find a way to check if it's an XRef.
I’m trying to create a view port, which covers my entire layout (white/ page area) using the following command
(command “mview” ‘(0 0 0) ‘(297.5 210 0))
However as you will note 0,0,0 is not the very edge corner of my layout (white area) and my white area is smaller then 297.5x 210mm (standard A4 landscape size)
How to obtain the exact measurements and starting coordinates to fully fill my entire layout page (white area)?
I am trying to create an mtext entity using entmake with different text height, text style and underlining. I have a subroutine that works fine. However - I would like to use different text height, text style and underline for the Title Text vs the following lines.
Here is the subroutine I already have -
(defun Create_MText (MT_PMS MT_Layout MT_Layer MT_Style MT_Justify MT_Point MT_Rotate MT_Size MT_Width MT_Title MT_Body / )
(setq FSC_MText
(list
(cons 0 "MTEXT")
[Code] .......
I've made a failed attempt to add the RIBBONCONTROL Named Views to the main Quick Access Toolbar. The Customize User Interface dialogue box (CUI) seems to allow me to drag the Named Views RIBBONCONTROL from the command list to Quick Access Toolbar 1. I don't see the "forbidden" icon and the blue insert bar shows up when I perform the drag operation.
However, I suspect there is some compatibility issue, because the command doesn't pop up when I release the mouse button at the end of the drag operation. Using command QUICKCUI and trying to drag Named Views RIBBONCONTROL directly to the Quick Access Toolbar (on screen) seems to be allowed likewise, but doesn't work also.
Using the regular View Manager Dialogue is not the kind of solution I'm looking for, because in the View Manager it takes at least twice as much mouse clicks to change to another view.
Any way to reach the desired customization? Should it be reported as a bug to Autodesk?
With all of you fine teachers, I have the know-how to get the start and end values of a line.
Do you think there is a way to get a point returned that represents the true intersection of the two lines, without having to involke a user defined "getpoint" function using "intersect" osnap?
I have configured a client workspace with a customised quick access toolbar and I am using acaddoc.lsp to ensure it is loaded when ACAD is fired up, the problem is, despite forcing the GUI to change wksps by:
(command "wscurrent" "Autocad classic")
(princ)
(command "wscurrent" "Barclays Net 2012")
(princ)
I can see the swap happening but the quick access bar is missing. If I manually select the current wksp from the switching tool it appears I don't even need to change to a different wksp and on restart it remains visible, it is only occurring on first use.
Is there a lisp that will allow me to do a continuous dimension, but will alternate the dimension position from low, high, low and high? If there is no lisp already created, how to create one?
See Continuous dimension attachment for example.
I work at a glass and glazing company and this is how we dimension mullion width and DLO. See typical window dimensioning attachment for window elevation with dimensions.
I have a list ("temp.dwg" "temp2.dwg") and would like to add the string "insert text here" into each item in the list resulting in ("insert text heretemp.dwg" "insert textheretemp2.dwg"). how would i go about doing that using LISP?
View 2 Replies View RelatedIs there a way to programatically set a visual style before a drawing actually opens?
We have some huge models and people seem to forget to change their visual styles back to 2D wireframe before saving and exiting drawings. Some models will crash on some workstations when trying to open in a rendered mode.
I found a lisp with a function that looked to set viewport visual styles. But it does not seem to be supported anymore. --> (vla-put-VisualStyle vport 1)
I'm trying to write a lisp routine that, when I invoke the mleader command, osmode is set to "nearest" & orthomode is set off. I then would like the original settings to be returned.
attached is what I have written so far:-
Lisp that switches back on Selection Preview i.e. thickens and highlights lines when you hover over them?I don't know why, but they are always unticking the boxes.
View 4 Replies View RelatedIs it possible to execute a certain command based on multiple selections withinin a dcl? for example: two radio colums, one with selections A and B, and a second with selections 1 and 2. is it possible to program commands based on user selections from each column? ex: if A and 1- do a command. A 2- do a different command, etc...
I tried :
(action_tile "key1" "(setq A t")
(action_tile "key2" "(setq B t")
(action_tile "key3" "(setq 1 t)(done_dialog)")
(action_tile "key4" "(setq 2 t)(done_dialog)")
(if
(and (a) (1)
)
(command ...
but was unsuccessful. no matter which combination was selected, the command under all combinations would run.
I am trying to find a lisp that would get an attribute value (tag name = NBR_5) . I'm trying to run a simple routine that would let the user place the value from the titleblock attribute as text on a drawing. I see a ton of articles regarding getting attributes but I am not well versed in programming.
View 9 Replies View RelatedI have a routine that work fine, but I receive a nil at the end of command. How to fix that?
View 7 Replies View RelatedI'm trying to find acceptable point values to feed to the vlax-3d-point function for a vla-addmtext function. With vanilla lisp I just provide the point as x y = "7/32" "2-3/8". So I assumed that I could drop a 0 in for the z like: (VLAX-3D-POINT "7/32" "2-3/8" 0).
Then I thought I was going to be tricksy and try (vlax-3D-point (getpoint)) believing that I could pick the point and get what I need to feed the function, but yet again, no deal. The command line gave me:
node
of #<variant 8197 ...>
Nothing I can use in my code. So how do I find the point in a format that vlax-3d-point will like?
What is the magic word for put a point at each end of an arc, the lisp I have only put a point at center of the arc.
(defun cAA ( / i j ss e1 e2 p1 p2 p3 points )
(if (setq i -1 ss (ssget '((0 . "ARC"))))
(progn
[Code].....
Is there a quick way of getting the value of an attribute?
I have an attributed block called "tp_attributes" and it has and attribute called "OrderNum".
I just want to be able to quickly grab that value.
I use Spell Check regularly and I always check the entire drawing. I would like to add to the Spell macro so that when I pick Spell from the toolbar it goes past the Check Spelling window and begins checking the entire drawing.
I believe I need to insert Alt S into my macro to select Start from the window to begin the check. Is there a character or series of characters that will represent Alt in a macro?
I upgraded from Autocad 2004 to 2012 recently and my lisp file doesnt work anymore.
what it's supposed to do is when looking at the layout tab that you want you can switch to the model space location of the same zoom as the layout tab without messing with the layout zoom.
(defun c:msp ()
(setq cm (getvar "cmdecho"))
(setvar "cmdecho" 0)
(command"view" "d" "tmp")
(setvar "tilemode" 0)
(command"pspace")
(princ "Click TWICE on desired VPORT: ")
(command "mspace" pause "view" "s" "tmp")(princ)
(setvar "tilemode" 1)
(command "view" "r" "tmp")
(setvar"cmdecho" cm)
(princ)
)
I need a program that simulate this DOS command: dir /on/b *.dwg >list.txt
it list all dwg files on current open dwg file folder and sort them and finally put them in a text file with list.txt name. something like thistype list.txt)
test1.dwg
test2.dwg
test100.dwg
test256.dwg
test1005.dwg
(sort alphabetically and logically) because of disabled DOS utility in my PC I need a pure lisp functions, I tried to wrote this program but I couldn't!!
(defun c:listMaker()
(vl-load-com)
(setq path (getvar "dwgprefix"))
(setq fn "list.txt")
[code]...
and also I need a append a string(='This Is EOF') in the last line of the "list.txt" file.
I have text objects with the same Z value and I will select as follows:
(setq sstxt (ssget '((0 . "TEXT")(8 . "APS-text"))))
How to store this value in another variable "zvalue" to apply to:
(command "change" "select text objects" "" "_p" "_e" zvalue "") ?
