I am looking for a way to correctly make or modify a Windows 7 Start Orb (ex: [URL]......
When I do it simply, appears a black square when I click on the Start button. All instructions on this topic are made for Photoshop, or Gimp, but not for Paint.Net
Here is one of my own, which does not work [URL].....
how to create a Windows 7 Start orb.
View 5 Replies View RelatedThis is a strange thing : I have PSP X5 under my computer for about one year, and this morning it does not start when I click on PSP icon. When I look at the process monitoring, the exe appears and disappears 3 seconds later. I tried the restore database, nothing changed. I tried to rename the database file, no more success.
View 3 Replies View RelatedWhen I start PS CS3, by initializing the pallets ("Paletten werden initialisiert" (German message) the window closed and does nothing more.
After uninstalling and new installation the same happened.
What can I do?
Is there an uninstalling tool from adobe, which removes all registry keys?
I did a complete uninstall of GIMP 2.6. Then a complete install of GIMP 2.8. No errors during installation. When I run GIMP, Windows draws a window frame with the title "GIMP Startup" but the inside of the window remains unpainted (whatever was behind it remains visible). This window frame exists for maybe one second and then closes. I have waited a long time but nothing continues. Task Manager confirms that no application is running. I uninstalled, downloaded again, reinstalled (even just a "compact" installation), but same thing.
System Info:
Windows XP Home SP3, up to date
2 GB RAM
Paging file initial 3058 MB, max 6116 MB
Goes straight to a black box that says not responding then gets to looking for data files and then windows takes over and searches for a solution before shutting the whole works down. Takes about 30 secs.
I just installed this because 2.6 was doing the same thing.
I am running Photoshop CS6 (Creative Cloud subscription) on a Windows 8 machine. While Photoshop itself starts perfectly OK when I click on the Bridge ikon I get a revolving little circle for a few seconds, then nothing. The same happens when I try to start it from within Photoshop. Mini Bridge says it can't start without full bridge running.
How to get Bridge to run. The only clue I can give to what could be the problem is that I had CS2 running on the machine prior to installing CS6 and I wonder if there is still some detritus from that installation hanging around. By the way I have searched the forum and tried most of the cures suggested in the past for similar problems on earlier versions of Photoshop. It is a anoyance rather than a game stopper for me as I manage my photo library using Light room but I would like to sort the problem out.
I'm running the cloud on a window machine 64 bit. Everytime I open Photoshop I get the error : It cannot start because it's missing plugplug.dll, then it does load.
View 6 Replies View RelatedLightroom 4.3 won't start up on my Windows 8, 32 bit machine. Install went fine but when I click on the Lr icon the program appears to start up and I get the Lr in the task bar at the bottom and when I hover over the icon I get a thumbnail of the start screen. When I hover over the thumbnail of the start screen it appears on my desktop but when I move the mouse off the thumbnail the start screen disappears from the desktop so there is no way to get past this point.
View 1 Replies View RelatedWhen I try to start the CC in 64 bit mode I get the error 0x0000005. (in 32 bit there is no problem)
I'm using Windows 7, 64 bit and have been using other Photoshop versions without any problem. My current version of Photoshop is CS6. I've updated the Nvidia driver and that didn't work.
I get file-tiff-save.exe & file-tiff-load.exe Application Error when opening Gimp 2.8.2 in windows 7 64-bit.The error: The application was unable to start correctly (0xc000007b).
View 5 Replies View RelatedYesterday i work normal on my PC and after the windows Updates from today my Corel doesn´t start.
@ frist I try ti uninstall all updates from Microsoft and restart my PC.
My System:
Win7 64 (a Complete new installation)
VMWare Mashine
4 Core
8 GB RAM
Autocad 2010 won't start up on my new windows 7 64bit system. I keep getting error msg Error msg : 0XC0000076 when I try to lauch the program
View 1 Replies View RelatedAll the products installed on my Win 7 Pro 64 Start Menu show the jumplist properly, including Corel X5. This is not working for X6. Yes, I know I can use the Open Recent. menu once I am in CorelDraw.
View 4 Replies View Relatedwhy doesn't gimp remember windows toolbar dock setup at the start on the left hand side and the right side?
View 2 Replies View RelatedI am running Windows 7 SP1. I have tried uninstalling using Revo Uninstaller, twice. I have also tried opening it by using the shift key which did reset the preferences but still won't open. I have turned off DEP svs for it.I have tried just about everything and I am very upset.
View 7 Replies View RelatedWhenever you open up paint.net, it always has one white-background layer as the default layer.
Then i start drawing and after a while i realize "if i did this on transparent background i could reuse it in so many places!". So i either have to manually erase the white background carefully around every corner or restart drawing.
It would be good if the default was two layers, one white background layer and one empty layer where you start drawing. I know it's super simple to just create a new one manually when you start, but i'm often in such a rush when opening up to start drawing that i always forget.
After Installing Sp3 PSP X4 does not start. I only get Error message:
Error: Versions must match.
Master = 14.2.0.1
RC = 14.3.0.1
I tried to install it also on a Windows 7 computer with same result.What to do?
PaintShop Photo Pro X3 - downloaded version. System: Windows 7 Professional.
When I try to run the downloaded file, "PSPP_X3_Ult_PF.exe", logged in as an Administrator, the following message pops up and the installation stops.
PPP3 installation error message.jpg (21.6 KiB) Viewed 734 times
I cannot get PaintShop Photo Pro X3 NL to start up anymore. Windows Task Manager shows PSP to have started up - as a service only. In the meanwhile, I do get this error message:
[Webbrowser:]
["Cannot find ...:/Users/Kanis/AppData/Roaming//Corel/Messages/540229901_907002/EN/MessageCache...
Check path of the internet address."]
(I'm running my PC in Dutch; so I translated it as correctly as possible).
This message appears from the very instant that I installed Corel WordPerfect X5 on my system, i.e. February 8, 2011. Then I uninstalled WP X5 completely. However, the above message keeps appearing, whenever I try to start Corel PaintShop Photo Project Creator or PSP X3.
In order to keep on going, I installed PSP X3 on a virtual machine on this PC (O/S: Windows XP 32 bits SP3 under VMware Workstation 7.1.4 ( under host W7 Ultimate 64 NL)). It works fine from the beginning, but this is not meant to be. Therefore, on June 6, I tried a fresh reinstall on PSP X3 on the main operating system (W7 Ultimate 64 NL). The problem persisted, as before. I then uninstalled ALL Corel applications from that system, went through the entire register and deleted all traces of Corel, PSP X3 and WP X5 applications. Expelled also all traces of PSI-Service related items (also from the register). Then I made a fresh reinstall of PSP X3, and it worked. Eureka ? Until this very morning. Same old story started all over again. So obviously I have not found the root of the problem. It must have been masked for some time. What is the source of the error message? And how come it causes PSP X3 to start as a service only, and not continue. Note: note even the start-up screen of PSP X3 does show up.
Clicking on the desktop icon provided by the install of Pspx4 has the splash image appear briefly then a 'not going to do it' message box followed by Win7 'there is a problem, progam is being closed' message box.Created my own shortcut from the Pspx4 exe and the same thing happened.Using the listing in the Start Menu 'All Programs' will start PspX4.
There is no problem exporting an image from Lightroom 4 to be opened in Pspx4. That happens without fault.I applied 'run as administrator' to the shortcut I created and now that will open the software as expected.
As some know, it comes on the installation CD of PSPX3.
Quite simply, three seconds after double clicking the program icon, I get this. I'm on the second installation. Patches won't install. I get the message " product that needs to be updated not found" or something similar.
I installed a new harddrive on my laptop and restored a Ghost image of my old drive onto the new one. Most of the installed software worked right off. Some needed to be re-activated as the software detected a significant hardware change. However, PSP X3 would not start, crashing during loading. The PSP X. splash shows and the loading status gets to "initializing palettes" then Windows reports "Corel Paintshop Pro X3 has stopped working. Windows is checking for a solution...". That's it.
I have un-installed PSP X3 and reloaded from CD. I downloaded the 4 existing patches (1 through 4) and installed them in sequence. I didn't try starting PSP X3 until all the patches were in. Corel.com confirms the activation of the software.
I've used PaintShop since the JASC days and the software works great. However, since about version 9, the software has become more prone to crashing under a variety of circumstances. Now it won't start.
Specs
1.8 GHz laptop
3 GB RAM
500 GB Seagate Momentus XT drive with 4 GB RAM buffer (supposedly a "hybrid" drive)
Windows 7 Pro 64 bit
How can I restore my start screen to be it's full width.
View 9 Replies View RelatedWhen I draw a line, is there a way to say, "Start at point (864,0), go exactly 270° down (actually, I can hold down the shift key for that, but I digress...) and end at the other side of the canvas at point (864, 3456)?
A script would probably work well, but I've never dipped into that.
I am trying to create a Microsoft Word toolbar icon at around 32x32.
I have a vector image in illustrator and need to export it as a .bmp file.
The problem is I am losing the resolution and the end result looks like crap.
The existing icons in word are nice and smooth and seem to look fine.
I am having a little problem with creating any kind of window into AEC wall. I am using edge snap 2.5 ( have also tried 3D snap). The window just wont appear.
View 1 Replies View RelatedEvery time I start PDN it creates empty 800x600 image. Is there any way to change size of image or even disable this feature?
View 2 Replies View Relatedcannot find a way to create a pdf and saving it into a desktop. Basically, in the -plot command, there should be an option to allow it to save to C:documents and settings"username"desktopfilename.pdf"
See the command line used:
(COMMAND "-PLOT" "Y" "" "DWG to PDF.pc3" "30 x 42" "Inches" "Landscape" "No" "Extents" "1=1" "CENTER" "Yes" "Fullsize.ctb" "yes" "No" "No" "No" "C:\Documents and Settings\Username\Desktop\Filename.pdf" "N" "Y")
The objective is to allow the lisp to plug in whichever username and automatically creating a pdf based on the filename.
I can't seem to get my profile start and end station labels to appear even after I checked "Label start station" and "label end station" in the profile view properties.
View 2 Replies View RelatedI got this error
Unable to start application (0xc000007b).
I already tried several fixes like:
1. reinstall all redist(x64 & x86).
2. reinstall .Net 4.0
3. Use CCleaner for Registry error.
4. chckdsk for error and fix.still error so I've gone through this.
5. I uninstall Autocad 2014 completely, uninstall it manually one by one,deleted left over folder of autodesk or similar software to it, deleted its registry keys.just like the instruction on how to remove autocad completely in autodesk, I just followed it all. [after Reboot]
6 I Re-install it and still the problem persist.
