Whenever you open up paint.net, it always has one white-background layer as the default layer.
Then i start drawing and after a while i realize "if i did this on transparent background i could reuse it in so many places!". So i either have to manually erase the white background carefully around every corner or restart drawing.
It would be good if the default was two layers, one white background layer and one empty layer where you start drawing. I know it's super simple to just create a new one manually when you start, but i'm often in such a rush when opening up to start drawing that i always forget.
The sublayers are all open when I open the document. I DREAD closing a document because I have HUNDREDS of layers that I have to close. Is this BUG really something that has been around for YEARS like others are saying?
I noticed my layers panel became closed every time I start Photoshop cs6. I tried to create new workspace with open panel but that's had no effect, panel is closed after the restart of Photoshop.
I am running Windows 7 SP1. I have tried uninstalling using Revo Uninstaller, twice. I have also tried opening it by using the shift key which did reset the preferences but still won't open. I have turned off DEP svs for it.I have tried just about everything and I am very upset.
I am looking for a way to correctly make or modify a Windows 7 Start Orb (ex: [URL]......
When I do it simply, appears a black square when I click on the Start button. All instructions on this topic are made for Photoshop, or Gimp, but not for Paint.Net
Here is one of my own, which does not work [URL].....
I cannot get PaintShop Photo Pro X3 NL to start up anymore. Windows Task Manager shows PSP to have started up - as a service only. In the meanwhile, I do get this error message:
[Webbrowser:] ["Cannot find ...:/Users/Kanis/AppData/Roaming//Corel/Messages/540229901_907002/EN/MessageCache... Check path of the internet address."]
(I'm running my PC in Dutch; so I translated it as correctly as possible).
This message appears from the very instant that I installed Corel WordPerfect X5 on my system, i.e. February 8, 2011. Then I uninstalled WP X5 completely. However, the above message keeps appearing, whenever I try to start Corel PaintShop Photo Project Creator or PSP X3.
In order to keep on going, I installed PSP X3 on a virtual machine on this PC (O/S: Windows XP 32 bits SP3 under VMware Workstation 7.1.4 ( under host W7 Ultimate 64 NL)). It works fine from the beginning, but this is not meant to be. Therefore, on June 6, I tried a fresh reinstall on PSP X3 on the main operating system (W7 Ultimate 64 NL). The problem persisted, as before. I then uninstalled ALL Corel applications from that system, went through the entire register and deleted all traces of Corel, PSP X3 and WP X5 applications. Expelled also all traces of PSI-Service related items (also from the register). Then I made a fresh reinstall of PSP X3, and it worked. Eureka ? Until this very morning. Same old story started all over again. So obviously I have not found the root of the problem. It must have been masked for some time. What is the source of the error message? And how come it causes PSP X3 to start as a service only, and not continue. Note: note even the start-up screen of PSP X3 does show up.
Clicking on the desktop icon provided by the install of Pspx4 has the splash image appear briefly then a 'not going to do it' message box followed by Win7 'there is a problem, progam is being closed' message box.Created my own shortcut from the Pspx4 exe and the same thing happened.Using the listing in the Start Menu 'All Programs' will start PspX4.
There is no problem exporting an image from Lightroom 4 to be opened in Pspx4. That happens without fault.I applied 'run as administrator' to the shortcut I created and now that will open the software as expected.
As some know, it comes on the installation CD of PSPX3.
Quite simply, three seconds after double clicking the program icon, I get this. I'm on the second installation. Patches won't install. I get the message " product that needs to be updated not found" or something similar.
I installed a new harddrive on my laptop and restored a Ghost image of my old drive onto the new one. Most of the installed software worked right off. Some needed to be re-activated as the software detected a significant hardware change. However, PSP X3 would not start, crashing during loading. The PSP X. splash shows and the loading status gets to "initializing palettes" then Windows reports "Corel Paintshop Pro X3 has stopped working. Windows is checking for a solution...". That's it.
I have un-installed PSP X3 and reloaded from CD. I downloaded the 4 existing patches (1 through 4) and installed them in sequence. I didn't try starting PSP X3 until all the patches were in. Corel.com confirms the activation of the software.
I've used PaintShop since the JASC days and the software works great. However, since about version 9, the software has become more prone to crashing under a variety of circumstances. Now it won't start.
Specs 1.8 GHz laptop 3 GB RAM 500 GB Seagate Momentus XT drive with 4 GB RAM buffer (supposedly a "hybrid" drive) Windows 7 Pro 64 bit
This is a strange thing : I have PSP X5 under my computer for about one year, and this morning it does not start when I click on PSP icon. When I look at the process monitoring, the exe appears and disappears 3 seconds later. I tried the restore database, nothing changed. I tried to rename the database file, no more success.
When I draw a line, is there a way to say, "Start at point (864,0), go exactly 270° down (actually, I can hold down the shift key for that, but I digress...) and end at the other side of the canvas at point (864, 3456)?
A script would probably work well, but I've never dipped into that.
I can't seem to get my profile start and end station labels to appear even after I checked "Label start station" and "label end station" in the profile view properties.
4. chckdsk for error and fix.still error so I've gone through this.
5. I uninstall Autocad 2014 completely, uninstall it manually one by one,deleted left over folder of autodesk or similar software to it, deleted its registry keys.just like the instruction on how to remove autocad completely in autodesk, I just followed it all. [after Reboot]
I want to start AutoCAD LT without the empty drawing. Just AutoCAD and the welcome screen. How can i do that? I always close the first drawing and begin a new one by choosing out of several templates or start with an existing drawing, rename and modify it. For NEW or OPEN i like to use the welcome screen.
I just installed 3DS Max 2012 with a student license, but I encountered a problem that doesn't seem to go away. Whenever I open it, it gets to the "Starting 3DS Max 2012" screen and then freezes. The process freezes as well. Is there a way I can fix this? I have Windows 7 Ultimate, 32-Bit, and a Dual-Core Processor. My computer meets all the System Requirements except an insufficient video card.
I have a VB .NET Dll that add a new ribbon in AUTOCAD.When I load this dll from AUTOCAD, this new ribbon is well added.I'm trying to start this dll with AUTOCAD Start.
I've tried to load the DLL from the acad.lsp but the DLL is loaded before AUTOCAD load the ribbon, then the dll is well loaded but my new ribbon is not displayed !.
I am trying to make one image the background, and put others on top of it,I removed the background, but it still isn't showing..I also looked for a move layer down button but I can't find it.
The online tutorial shows, in the layers window, an up arrow and a down arrow, supposedly used to change the level of the current layer:Move Layer Up. This will move the current layer to a higher position in the layer order.Move Layer Down..This will move the current layer to a lower position in the layer order.
However, these arrows do not appear in my program. Also, I'm not clear on the function of "move layer up", since the current layer is the top layer, isn't it? So, how do I push the current layer back, so that the one behind it becomes the current layer? (At present I have only two layers in the picture I'm working on.)
I installed version 3.5.10 either yesterday or the day before, so it is current.
I can't add and/or duplicate layers. I want to make a button (which I've made many times) But I can't add the appropriate amount of layering (in fact, I can't add any at all!
When I saved my file, I saved it as a jpeg because I hadn't saved it until done with it. But since I saved it as a JPEG, I closed out and it notified me about the flattening process, which I am familiar with, so I ignored it because it said something about being able to undo the process.
I am trying to move layers either up or down. I read somewhere to go to the Layers tab and under there should be Move Up or Move Down. When I do there those functions are not present. Could it be because I am using version 3.5.11?
I haven't really used PSP for doing custom graphics, mostly for working on photos; but before that I was using Adobe Photoshop and I liked (and still do) how it made saving easier than PSP does. Unfortunately Photoshop is horribly expensive so this is a better option.
I can't figure out for the life of me how to save .psd or .eps with the layers? It keeps telling me that due to how I am saving or the file format the alpha layers will be lost and so on.
