Paint Shop Pro :: X6 - Installing 8BF Plugins
Nov 25, 2013
In this version PSP-X6 I am not able to activate my plugins. Here's what I did started the application and went to File /Preferences / File Location / Plugins. I added the folder where I have my plugins and selected the Enable Adobe plugins, Limit plugins w 8B? ext., Folder option enable, use sub folder, click OK then closed out the application and re-started PSP and open a picture with into effects, plugins and none of my plugins are available to be used.
View 2 Replies
ADVERTISEMENT
May 25, 2012
After I migrated to Windows 7, PSPX3 does not load the plug-ins anymore. It says: "No plug-ins loaded." Older versions of PSP can load the plugins from the same directory, but not PSPX3. I have tried resetting the cache, and have checked the file location. It's correct and it is notched, but nothing works. I have 6Gb of RAM so it should do. Of course, I could always run the scripts in PSP8, so it's no big deal. But it should work.
View 1 Replies
View Related
Nov 7, 2011
I upgraded from photo pro x3 ultimate to x4 ultimate. However, I have some plugins I use in X3, i.e like KPT Collection, Magic Bullet et cetera. I tried to reinstall my kpt collection, but it shows only in X3 (again) and not in X4.
how I can move my plugins from x3 to x4!
View 3 Replies
View Related
Jul 25, 2011
Yesterday I purchased Paint Shop Pro, downloaded it along with the extras -- KPT Collection, Magic Bullet, Win Zip, etc. -- all of which I was able to load/run, but the KPT Collection of effects/filters are not available. The filters are listed under plugins on the menu, but they are not highlighted and therefore can't be accessed.
Is there something I'm missing in trying to use the KPTs or something else that needs to be done to activate them? I did a search here on the forum, but didn't see anything that related to this problem.
View 3 Replies
View Related
Sep 1, 2013
I have used MV's Plugins for years. They worked fine in X4, started to not work on a layer in X5, but if I flattened the layer, no problem. In X6 none work, I get an error message. I have the latest versions as far as I am aware.
I then pointed the new Xara Photo & Graphic Designer 9 to the same folder (in this case Contrast Mask) to see if it works there. No problem. Ergo: what's happened to X6 to give these errors. MV'sPlugins_not_working-X6.jpg
View 10 Replies
View Related
Jan 28, 2012
I bought the older Version Paint Shop Pro Photo X2 installed it yesterday looked as it were working fine, but crashes with several plugins I usually use. Now I work again with Paint Shop Pro 9.01 since this version works stable and does not crash with the very same plugins. I thought that X2 would be better than XI which I bought a long while ago, since that version always crashed.
Now I would like to know, if there is a chance to work with X2 without crashes or that I have to continue to work with 9.01 and throw the X2 into trash same I did before to the version XI?
View 3 Replies
View Related
Aug 30, 2013
I installed the KPT plug ins from the Corel Content (or whatever it is called) website. They don't show up in X6--64 bit version. That is because they only work in 32? How can I get them to show up in 64 bit?
ps. They show up in X5. I can't remember which one, but I did like one of them.
View 9 Replies
View Related
Jul 23, 2011
I just started using PaintShop Pro x3. Does PSP is fully compatible with ALL Photoshop plugins & filters?
View 2 Replies
View Related
Oct 23, 2011
Although Paint Shop Pro X4 runs the filters from Topaz Labs correctly on a single file, PSPX4 chokes when running the filters as part of a script in batch files. Not only was the program unable to apply the plug-ins correctly in a batch file, the errors were different depending on the plug-in.
I ran my tests on 8 JPG files with dimensions of 4021x3024 pix, file size averaging 2.8 MB. I then reduced the files to 800x600 pix dimensions and ran the same tests. Results were the same on both size groups. I recorded a script with only each Topaz filter, then tested the script on a single image. The script worked. The problems occurred when run in batch processing. I tested against another company's plug-in, running Alien Skin's Xenofex 2 Burnt Edges in a batch file with script on the 8 images with no problem. I also tested the same Topaz Labs filters in PhotoLine 16, recording and playing actions. The plug-ins ran perfectly in PhotoLine.
When batch processing was run in PSPX4, it was run with the test script selected and silent mode selected. Silent mode means the script should run from start to finish with no intervention by the user. Here's what happened in my tests.
Topaz Adjust 4 - Batch file runs correctly through 4 images, then the process freezes. The Windows Task Manager shows PSPX4 to be "running."
Topaz Detail 2 - Batch file runs correctly through 4 images, then the process freezes. The Windows Task Manager shows PSPX4 to be "running."
Topoaz Clean 3 - Batch file runs, but Topaz window opens on each file, requiring user selection before progressing to next file. However, the process freezes after the fourth image. The Windows Task Manager shows PSPX4 to be "running."
Topaz InFocus - Batch file runs, but Topaz window opens on each file, requiring user selection before progressing to next file. However, the process freezes after the fourth image. The Windows Task Manager shows PSPX4 to be "running."
Topaz Lens Effects - Batch file runs, but Topaz window opens on each file, requiring user selection before progressing to next file. However, the process freezes after the fourth image. The Windows Task Manager shows PSPX4 to be "running."
Topaz DeNoise 5 - Batch file runs for all 8 files, however Topaz window opens on each file, requiring user selection.
View 8 Replies
View Related
Jan 25, 2013
got the new Alien Skin plugins to work. When you install Alien Skin, you install to a single directory, both 32 bit and 64 bit plugins. Then in X5, File Locations, I put that directory in the settings but still nothing. maybe X5 doesn't work with them.
View 1 Replies
View Related
Jul 17, 2011
Just recently got X3 and look forward to using it. In setting up KPT filters work OK but the Magic bullet Looks fails to launch, or at least just opens a blank window and X3 passes the message "wrong parameters passed". I have de-installed and re-installed to no different effect. Running Win7-64.
View 1 Replies
View Related
Aug 8, 2012
Is there a finite number of plugins that can be installed with PSPX4?
View 2 Replies
View Related
Sep 22, 2011
Just installed PSP Pro X4 and tried to uninstall X3. Can't do it. Tried three times. Get an error msg: "The Installation Wizard encountered a problem while trying to configure your software.
Could not access file: c:users homasappdata....setup.msi -- The system cannot find the path specified. Would you like to continue? Yes No" When I choose Yes I get another error msg that says: "Installation Wizard not complete. Your system has not been modified. To complete installation at another time, please run setup again. Click finish to exit the wizard. You do not have sufficient privileges to complete this installation. This installation requires administrative oo elevated privileges. Please contact your administrator and then retry this installation."
View 5 Replies
View Related
Dec 6, 2012
After Installing Sp3 PSP X4 does not start. I only get Error message:
Error: Versions must match.
Master = 14.2.0.1
RC = 14.3.0.1
I tried to install it also on a Windows 7 computer with same result.What to do?
View 14 Replies
View Related
Dec 10, 2013
I installed PSP x6 ultimate using the install 32 and 64 bit versions. I tried to install the kpt and creative content and get the following message-
"setupnewsetup.cpp(143)
PAPP:
PVENDOR:
PGUID:
$15.0.0.498
@windows vista service pack 1 (7601)
IE version:9.11.9600.16428"
I also get the same error message using the 2nd dvd to install "perfectly clear" and "ultimate creative content".
I am running windows 7 pro and don't know why I am getting the error messages. Could this be because they do not run on the 64bit versions? If so when asked to install both versions would they run. There is no program start application for the 32 bit version even if you select install both.
View 1 Replies
View Related
Nov 7, 2013
While downloading the latest Service Pack 1, I get a fault-message (see attachment)
Even after deleting and re-installing Corel PSP X6 (version after initial install = 16.1.0.48)
Tried to download the SP through the program itself, but even from the download from the Corel server, i have the same result !
View 13 Replies
View Related
Oct 22, 2013
After installing the latest fix/update/patch Paintshop Ultimate X6 crashes continuously. After startup it goes for a minute or so and then crashes. I have uninstalled and reinstalled it without any change. I've emptied the temp directory.
View 4 Replies
View Related
Nov 1, 2013
How do I install third party plug-ins such as NIK or Topaz in CC?
View 4 Replies
View Related
Jun 12, 2006
How do I install plugins in photoshop? I've never done this before. I know there is an extention ".dll" or something like that. I have the xenofex 2 package. Also, can that be used with ps cs? Because thats what I have..i will be upgrading to cs2 very soon.
View 1 Replies
View Related
Aug 20, 2013
How do I install NIK Silver Efex Pro2 into Photoshop C Trial Version?
View 1 Replies
View Related
Sep 2, 2013
Python plugins are not installing. They don't show up. Script-Fu works fine though.
View 9 Replies
View Related
Sep 3, 2011
How do I put the plugins into paint.net? Like I downloaded pyrochild's plugins but I don't know how to put his plugins on paint.net.
View 4 Replies
View Related
Mar 23, 2011
I see that there are a lot of really cool plugins, but I haven't found how to load them into my copy of paint.net.
View 3 Replies
View Related
May 20, 2011
I have placed the paint net Plugin (A shapes Plugin) in the Paint net folder
Now, when I open up Paint net, how do I view the plugin
View 3 Replies
View Related
May 31, 2011
Is there any plugins for the bulge effect? The one that I have doesnt give me the effect that I want and its a little hard to work with.
View 4 Replies
View Related
Jul 7, 2013
Are there any plugins that create tiles from a big map for use with the Google maps API?
Or failing this, do photoshop plugins work with PDN?
View 3 Replies
View Related
Jan 26, 2012
Are there any watercolor effect plugins or plugins that aid in the water coloring process? I looked in the Plugin Index and searched multiple times but it turned up nothing.
View 6 Replies
View Related
Jan 5, 2014
Is there any plugins that have Bevel and Emboss?
View 13 Replies
View Related
Jun 13, 2011
I redirected a user to the links in the Jewel tute but the problem is that while the tute sends you to the correct plugin thread, the download links in that thread are broken.
What we need is Zoom Blur Deluxe & Radial Blue Deluxe. To make matters worse they go by a couple of aliases...
I would put this is the thread for plugins but I'd have to do it for both.
I have the .DLL saved for both, so as a workaround for the broken download link, can I upload the file (if I can identify which one it is, not always that straight forward) & how do I upload it? As ab attachment?
View 10 Replies
View Related
Dec 16, 2012
Is there any plugins to shade text, or make it 3d?
View 7 Replies
View Related
Mar 18, 2012
when i first used plugins my paint.Net slowed down and become less responsive. is it because of the plugins or would it just be my computer?
View 3 Replies
View Related