Paint Shop Pro :: MVs Plugins Not Working In X6?
Sep 1, 2013
I have used MV's Plugins for years. They worked fine in X4, started to not work on a layer in X5, but if I flattened the layer, no problem. In X6 none work, I get an error message. I have the latest versions as far as I am aware.
I then pointed the new Xara Photo & Graphic Designer 9 to the same folder (in this case Contrast Mask) to see if it works there. No problem. Ergo: what's happened to X6 to give these errors. MV'sPlugins_not_working-X6.jpg
View 10 Replies
ADVERTISEMENT
Jul 25, 2011
Yesterday I purchased Paint Shop Pro, downloaded it along with the extras -- KPT Collection, Magic Bullet, Win Zip, etc. -- all of which I was able to load/run, but the KPT Collection of effects/filters are not available. The filters are listed under plugins on the menu, but they are not highlighted and therefore can't be accessed.
Is there something I'm missing in trying to use the KPTs or something else that needs to be done to activate them? I did a search here on the forum, but didn't see anything that related to this problem.
View 3 Replies
View Related
Nov 25, 2013
In this version PSP-X6 I am not able to activate my plugins. Here's what I did started the application and went to File /Preferences / File Location / Plugins. I added the folder where I have my plugins and selected the Enable Adobe plugins, Limit plugins w 8B? ext., Folder option enable, use sub folder, click OK then closed out the application and re-started PSP and open a picture with into effects, plugins and none of my plugins are available to be used.
View 2 Replies
View Related
May 25, 2012
After I migrated to Windows 7, PSPX3 does not load the plug-ins anymore. It says: "No plug-ins loaded." Older versions of PSP can load the plugins from the same directory, but not PSPX3. I have tried resetting the cache, and have checked the file location. It's correct and it is notched, but nothing works. I have 6Gb of RAM so it should do. Of course, I could always run the scripts in PSP8, so it's no big deal. But it should work.
View 1 Replies
View Related
Nov 7, 2011
I upgraded from photo pro x3 ultimate to x4 ultimate. However, I have some plugins I use in X3, i.e like KPT Collection, Magic Bullet et cetera. I tried to reinstall my kpt collection, but it shows only in X3 (again) and not in X4.
how I can move my plugins from x3 to x4!
View 3 Replies
View Related
Jan 28, 2012
I bought the older Version Paint Shop Pro Photo X2 installed it yesterday looked as it were working fine, but crashes with several plugins I usually use. Now I work again with Paint Shop Pro 9.01 since this version works stable and does not crash with the very same plugins. I thought that X2 would be better than XI which I bought a long while ago, since that version always crashed.
Now I would like to know, if there is a chance to work with X2 without crashes or that I have to continue to work with 9.01 and throw the X2 into trash same I did before to the version XI?
View 3 Replies
View Related
Aug 30, 2013
I installed the KPT plug ins from the Corel Content (or whatever it is called) website. They don't show up in X6--64 bit version. That is because they only work in 32? How can I get them to show up in 64 bit?
ps. They show up in X5. I can't remember which one, but I did like one of them.
View 9 Replies
View Related
Jul 23, 2011
I just started using PaintShop Pro x3. Does PSP is fully compatible with ALL Photoshop plugins & filters?
View 2 Replies
View Related
Oct 23, 2011
Although Paint Shop Pro X4 runs the filters from Topaz Labs correctly on a single file, PSPX4 chokes when running the filters as part of a script in batch files. Not only was the program unable to apply the plug-ins correctly in a batch file, the errors were different depending on the plug-in.
I ran my tests on 8 JPG files with dimensions of 4021x3024 pix, file size averaging 2.8 MB. I then reduced the files to 800x600 pix dimensions and ran the same tests. Results were the same on both size groups. I recorded a script with only each Topaz filter, then tested the script on a single image. The script worked. The problems occurred when run in batch processing. I tested against another company's plug-in, running Alien Skin's Xenofex 2 Burnt Edges in a batch file with script on the 8 images with no problem. I also tested the same Topaz Labs filters in PhotoLine 16, recording and playing actions. The plug-ins ran perfectly in PhotoLine.
When batch processing was run in PSPX4, it was run with the test script selected and silent mode selected. Silent mode means the script should run from start to finish with no intervention by the user. Here's what happened in my tests.
Topaz Adjust 4 - Batch file runs correctly through 4 images, then the process freezes. The Windows Task Manager shows PSPX4 to be "running."
Topaz Detail 2 - Batch file runs correctly through 4 images, then the process freezes. The Windows Task Manager shows PSPX4 to be "running."
Topoaz Clean 3 - Batch file runs, but Topaz window opens on each file, requiring user selection before progressing to next file. However, the process freezes after the fourth image. The Windows Task Manager shows PSPX4 to be "running."
Topaz InFocus - Batch file runs, but Topaz window opens on each file, requiring user selection before progressing to next file. However, the process freezes after the fourth image. The Windows Task Manager shows PSPX4 to be "running."
Topaz Lens Effects - Batch file runs, but Topaz window opens on each file, requiring user selection before progressing to next file. However, the process freezes after the fourth image. The Windows Task Manager shows PSPX4 to be "running."
Topaz DeNoise 5 - Batch file runs for all 8 files, however Topaz window opens on each file, requiring user selection.
View 8 Replies
View Related
Jan 25, 2013
got the new Alien Skin plugins to work. When you install Alien Skin, you install to a single directory, both 32 bit and 64 bit plugins. Then in X5, File Locations, I put that directory in the settings but still nothing. maybe X5 doesn't work with them.
View 1 Replies
View Related
Jul 17, 2011
Just recently got X3 and look forward to using it. In setting up KPT filters work OK but the Magic bullet Looks fails to launch, or at least just opens a blank window and X3 passes the message "wrong parameters passed". I have de-installed and re-installed to no different effect. Running Win7-64.
View 1 Replies
View Related
Aug 8, 2012
Is there a finite number of plugins that can be installed with PSPX4?
View 2 Replies
View Related
Feb 15, 2012
Is it by any chance, possible to make tools as plugins usable in the "normal" working space, not in a new window? Also, adding something like this:
View 8 Replies
View Related
Apr 9, 2011
My program worked just great, then all of a sudden the paint brush and eraser will not do a thing.
View 14 Replies
View Related
Sep 12, 2011
I had been using X3 for quite a while, on this ancient machine... yet today, I downloaded X4 to see how much of a difference getting that program would be.
Installation went fine.
Program started up, asked me to put in my email address for registration confirmation.. no problem.
Loading screen: Paintshop Pro X4 has stopped working. I cannot get the program to load at all. All pre-required software and updates installed.
Here's a quick screen:
X3 still runs without issue, though I am also curious as to why that program weighs in at a 1.37GB total, and X4 is only 340MB? What's missing in X4 that takes up 1GB in X3?
View 11 Replies
View Related
May 13, 2012
My PSP X1 stopped working on me (and does not want to get reinstalled), and right now, i need a tiny information: what is the max brush size in X1? Is it 500 or 999?
View 2 Replies
View Related
May 11, 2013
I am having an issue as follows.
a) I have postscript (.ps) files for my company's logo which are in process color (CMYK).
b) These files open fine in PSP, and the colors are displayed properly. However, I understand that the files were actually converted to sRGB space, that is, I can't actually make changes in CMYK space, only in sRGB.
c) I need to make some changes to the logo, so I figured I would make the changes, then save a TIF file, using the CMYK space. My printer requires a CMYK file only.
d) Therefore, I simply saved the file opened in b) as a TIF file with a CMYK color space.
d) When I do the Save As in PSP, the file looks exactly like it did when first opened in PSP. (Update - if I close the TIF file in PSP, then reopen it, it does look different - greenish tinge, but not as bad as other viewers) But when I look at the file in other programs (IrfanView, MS Publisher, etc) the image is overly green, for example, my olive green logo components are almost bright green, and almost everything else seems to have a slightly greenish tint.
e) By comparison, if I open the postscript file in Irfanview, it renders correctly.
I thought Irfanview would input CMYK files (and apparently it does for .ps files) but my colors are wrong. Is this a TIF output issue with PSP? Or do I need to find another viewer to properly see the TIF file.
PSP X2
Win 7 Pro, 64 bit
Intel built in graphics.
View 5 Replies
View Related
Nov 29, 2011
repeat error each and every time I use any adjustment on graphics, photos or anything I am working on with PSP X3. Am including a screen shot, edited down to the forum specifics, and I had to edit the screen capture with PSP X2 since to reload PSP X3 will now require my restarting my computer.
I have used Paint Shop Pro since it's very first incarnation as a tiny program courtesy of the folks with Jasc, so this is not my first time using the product, just the absolute worst experience doing so.
No matter what the image, file type, or set-up, when I try to make adjustments (even if I make sure to stop and make double sure they are finished processing), eventually the program locks up and I get the error shown and stated.
View 3 Replies
View Related
Jan 25, 2012
I downloaded a trial version of PSP X4. When i export an image from ASP in ProPhoto RGB color profile, PSP insist to convert it to sRGB. I wonder what is the color profile that been used by PSP as the working space?
View 9 Replies
View Related
Oct 23, 2011
The selection tools, i.e. shape, freehand and magic wand, have suddenly stopped working. I do freehand, double click and nothing happens. The freehand selection actually disappears. I click magic wand and nothing happens.
View 3 Replies
View Related
May 6, 2013
I originally thought I would revert to IE 8, I thought it was because I had switched to IE 10. But I did find someone who blamed it on IE 8, so at this point IE is no longer my default browser.Windows 7 Pro 64-bit on my home computer with IE 10. often when I click on a video or a link on a web page, the attached jpeg comes up, the window turns black and I have to use Task Mgr to kill IE. So until I get to the bottom of this FF is my browser.Is it malware or a virus? MSE and Malwarebytes Pro up to date and frequent scans.
View 1 Replies
View Related
Nov 21, 2013
When I resize an image and save it as a jpg when I reopen the file and go to image info it did not resize it at all. This is a 2 second job and now 1 hour later, I cannot work out why in the world PSP X6 cannot perform a simple task.
View 2 Replies
View Related
Sep 8, 2011
I have been using PSP since jasc released version 4. I was a long time user of 7, 9 and then X2.
Beginning with X3 and now X4 the Auto-Preserve function does not work. I especially miss this feature when running batch process. This is my primary reason fro skipping over X3 waiting for X4.
The function works fine in x2, but it never did in the trials of X3 or now the trial of X4. The feature is enabled. I selected "Yes, do this every time" the first edit I preformed. Verified in preferences as well.
View 14 Replies
View Related
Jan 11, 2012
In earlier versions I was given the option of enabling the Auto Save feature, and choosing the time intervals between saves. I chose every 2 minutes. If it crashed or was shut down in a reboot, the images on which I was working were recovered with their layers intact. Nothing was lost. I do not have that option in Version X4.
Nothing is ever saved with Version X4
View 5 Replies
View Related
Jan 16, 2012
Getting the error message "Corel PaintShop Pro X4 has stopped working". So far no workaround discovered, still does not work.
OS: Windows 7 Home Premium, fully current with updates.
Memory: 8GM RAM
1 TB HD in each C; and E:
CPU: AMD Phenom 3GHz processor
GPU: ATI Radeon Graphic 3100
First installed in Windows 7 in
C:Program Files (x86)CorelCorel PaintShop Pro X4Corel PaintShop Pro.exe,
then in
E:Program Files (x86)CorelCorel PaintShop Pro X4Corel PaintShop Pro.exe (currently)
1. Installed, that error message
2. Patch, that error message
3. Removed, rebooted, e-installed, that error
4. Rebooted, reinstalled in XP, Works in XP! (I need it in Windows 7)
5. Removed ESET (needs to be relicensed anyways, this is priority right now)
6. Spybot shut down
7. Everything else works
8. Have been with PSP since JASC owned it as 4.0 (?) back in the mid 90s.
9. Frustrated with no answers, no solutions.
No AV, Spyware checkers, Malware checkers running. I took ownership of, have all permissions to and "Run as Administrator" Corel PaintShop Pro.exe
This is the application log:
Log Name: Application
Source: Application Error
Date: 1/16/2012 5:39:18 PM
Event ID: 1000
Task Category: (100)
Level: Error
[code]....
View 3 Replies
View Related
Oct 8, 2013
I'm in trouble with PSPSX6.
I have an script running fine with my old PSP (X4, X5). But in X6 the result in not good.
I use the script to insert the date on upper right corner of my pitcures. This data is found in Exif of the picture.
I use an fucntion returning the date, but with X6 , the result it not correct.
The source code is
--------------------------------------------------------------------------------------------------------
def FormatDate( InputExif, Format ):
''' Use the time.strftime method to format a date string in various ways.
The input exif date is always formatted as yyyy:mm:dd hh:mm:ss, so the first
step is to convert that to a time tuple. We do that by changing the one lone
space to a colon, then using split to give us a tuple that coincidentally
matches the one used by time.
'''
[Code]....
View 1 Replies
View Related
Nov 27, 2011
I would like to change the Dark color working area for a lighter one such as grey used in old Paint Shop 6 or 7.
View 2 Replies
View Related
Jun 17, 2013
PSP X5 version 15.2.0.12 -- no further update available. -- Windows 7 Ultimate SP1
When I try to merge down (not flatten) the top layer in the attached file, PSP X5 stops working EVERY TIME. I have been using PSP X5 extensively for a while (6 or 8 months) and have never encountered this before. All layers are 100% opaque, so this is not the same as a similar reported error. Also happens in PSP X4. I can work around this by cutting and pasting, but shouldn't have to.
BugExample.zip
Bug example: merge down top layer crashes PSP X5
(20.96 KiB) Downloaded 41 times
View 1 Replies
View Related
Jul 10, 2013
I have been using PSP x3 for awhile with no issues, but about a month ago, it simply stopped working. I open the program via shortcut, and the logo blinks onscreen, but the program never opens. No explanation, no trace.
I have attempted to uninstall and re-install, but each attempt to uninstall completely freezes the PC dead and I end up having to physically turn the PC off. I'm detecting no infection on the PC.
View 7 Replies
View Related
Jan 23, 2012
How to adjust the user interface color (dark to light)? I tried used changing the color working space colors but it didn't seem to make a difference. dark interface hard to read.
View 3 Replies
View Related
Dec 13, 2012
Just today, while making graphics and such, my custom fonts just stopped working all together. Every single one that I have installed just shows up as nothing and is un-selectable when using it. The one in particular that i was using is Bebas Neue. Although all installed fonts are not working either.This happened out of the blue and I don't remember hitting anything or changing anything. Just typing with the font and it refused to show.
Steps Taken:
1. Reset All Preferences
2. Shift Key Trick on Load Up
3. Restarting the Computer
4. Reinstalling PSP X2
5. Using the font in other programs - Which they WORK (Word, GIMP, Adobe Illustrator, etc.)
6. Uninstalling/Reinstalling the Font itself.
View 2 Replies
View Related
