I installed the KPT plug ins from the Corel Content (or whatever it is called) website. They don't show up in X6--64 bit version. That is because they only work in 32? How can I get them to show up in 64 bit?
ps. They show up in X5. I can't remember which one, but I did like one of them.
I'm using PSP X4, have an image open in edit but I'm not able to add any layer(s). None of the layer type options will remain highlighted for me to choose when I go to new mask layer or new adjustment layer.
View 4 Replies View RelatedI am unable to access my plugins since upgrading to PS CC
View 1 Replies View RelatedIn this version PSP-X6 I am not able to activate my plugins. Here's what I did started the application and went to File /Preferences / File Location / Plugins. I added the folder where I have my plugins and selected the Enable Adobe plugins, Limit plugins w 8B? ext., Folder option enable, use sub folder, click OK then closed out the application and re-started PSP and open a picture with into effects, plugins and none of my plugins are available to be used.
View 2 Replies View RelatedAfter I migrated to Windows 7, PSPX3 does not load the plug-ins anymore. It says: "No plug-ins loaded." Older versions of PSP can load the plugins from the same directory, but not PSPX3. I have tried resetting the cache, and have checked the file location. It's correct and it is notched, but nothing works. I have 6Gb of RAM so it should do. Of course, I could always run the scripts in PSP8, so it's no big deal. But it should work.
View 1 Replies View RelatedI upgraded from photo pro x3 ultimate to x4 ultimate. However, I have some plugins I use in X3, i.e like KPT Collection, Magic Bullet et cetera. I tried to reinstall my kpt collection, but it shows only in X3 (again) and not in X4.
how I can move my plugins from x3 to x4!
Yesterday I purchased Paint Shop Pro, downloaded it along with the extras -- KPT Collection, Magic Bullet, Win Zip, etc. -- all of which I was able to load/run, but the KPT Collection of effects/filters are not available. The filters are listed under plugins on the menu, but they are not highlighted and therefore can't be accessed.
Is there something I'm missing in trying to use the KPTs or something else that needs to be done to activate them? I did a search here on the forum, but didn't see anything that related to this problem.
I have used MV's Plugins for years. They worked fine in X4, started to not work on a layer in X5, but if I flattened the layer, no problem. In X6 none work, I get an error message. I have the latest versions as far as I am aware.
I then pointed the new Xara Photo & Graphic Designer 9 to the same folder (in this case Contrast Mask) to see if it works there. No problem. Ergo: what's happened to X6 to give these errors. MV'sPlugins_not_working-X6.jpg
I bought the older Version Paint Shop Pro Photo X2 installed it yesterday looked as it were working fine, but crashes with several plugins I usually use. Now I work again with Paint Shop Pro 9.01 since this version works stable and does not crash with the very same plugins. I thought that X2 would be better than XI which I bought a long while ago, since that version always crashed.
Now I would like to know, if there is a chance to work with X2 without crashes or that I have to continue to work with 9.01 and throw the X2 into trash same I did before to the version XI?
I just started using PaintShop Pro x3. Does PSP is fully compatible with ALL Photoshop plugins & filters?
View 2 Replies View RelatedAlthough Paint Shop Pro X4 runs the filters from Topaz Labs correctly on a single file, PSPX4 chokes when running the filters as part of a script in batch files. Not only was the program unable to apply the plug-ins correctly in a batch file, the errors were different depending on the plug-in.
I ran my tests on 8 JPG files with dimensions of 4021x3024 pix, file size averaging 2.8 MB. I then reduced the files to 800x600 pix dimensions and ran the same tests. Results were the same on both size groups. I recorded a script with only each Topaz filter, then tested the script on a single image. The script worked. The problems occurred when run in batch processing. I tested against another company's plug-in, running Alien Skin's Xenofex 2 Burnt Edges in a batch file with script on the 8 images with no problem. I also tested the same Topaz Labs filters in PhotoLine 16, recording and playing actions. The plug-ins ran perfectly in PhotoLine.
When batch processing was run in PSPX4, it was run with the test script selected and silent mode selected. Silent mode means the script should run from start to finish with no intervention by the user. Here's what happened in my tests.
Topaz Adjust 4 - Batch file runs correctly through 4 images, then the process freezes. The Windows Task Manager shows PSPX4 to be "running."
Topaz Detail 2 - Batch file runs correctly through 4 images, then the process freezes. The Windows Task Manager shows PSPX4 to be "running."
Topoaz Clean 3 - Batch file runs, but Topaz window opens on each file, requiring user selection before progressing to next file. However, the process freezes after the fourth image. The Windows Task Manager shows PSPX4 to be "running."
Topaz InFocus - Batch file runs, but Topaz window opens on each file, requiring user selection before progressing to next file. However, the process freezes after the fourth image. The Windows Task Manager shows PSPX4 to be "running."
Topaz Lens Effects - Batch file runs, but Topaz window opens on each file, requiring user selection before progressing to next file. However, the process freezes after the fourth image. The Windows Task Manager shows PSPX4 to be "running."
Topaz DeNoise 5 - Batch file runs for all 8 files, however Topaz window opens on each file, requiring user selection.
got the new Alien Skin plugins to work. When you install Alien Skin, you install to a single directory, both 32 bit and 64 bit plugins. Then in X5, File Locations, I put that directory in the settings but still nothing. maybe X5 doesn't work with them.
View 1 Replies View RelatedJust recently got X3 and look forward to using it. In setting up KPT filters work OK but the Magic bullet Looks fails to launch, or at least just opens a blank window and X3 passes the message "wrong parameters passed". I have de-installed and re-installed to no different effect. Running Win7-64.
View 1 Replies View RelatedIs there a finite number of plugins that can be installed with PSPX4?
View 2 Replies View RelatedI downloaded and installed the Preset Shapes 01, Maps 01, Layer Editing 01, Gradient 01.
How do I access these features? I don't see any selection in the menus or toolbars.
How do I access the Creative Collection, which I downloaded and installed with PSP X5 Ultimate?
I upgraded from PaintShop Photo Pro X3.
I have Windows 7 64 bit and PSP x5. Everytime I try to access my brushes, it freezes and the drop down menu won't open to select a brush. If I play with it for an hour or so it will finally come down for a second and I have to select quickly before it closes again. I have lots of memory and hard drive space. I've uninstalled KB2670838 windows update, as another forum suggested for general x5 freezes. I deleted all the brushed from the program file and made a separate folder and pointed XP to it in the file locations. The same thing happened with my tubes, but after continually trying to open them several times, it finally opened and from that point on it worked, not so with the brushes which I need to use in my work.I don't want to have to uninstall and reinstall, it took so long to get all the plugins added and working to have to do that again.
View 2 Replies View RelatedWhen dealing with vector, it is just to click in image with "pick tool" to appear a tool bar where object align/distribution is available.
But when dealing with raster, this tool isn't available. The only way I found is through "menu=> objects=>align". To raster images, is there similar vector tool bar to access direct object align/distribution?
I've recently upgraded to PSP X5 and tried to update to the latest nvidia 32 bit DDS Plugin today (this one).
After the installation i copied the "dds.8bi" file in my "PlugInsEN" folder - which worked perfect with previous versions (my latest was from 2011 tho).
When i try to save a DDS file i get the normal DDS export/configuration dialog. When i hit save, i get an error message stating that the plugin causes an access violation (in german: "Plugin hat Zugriffsverletzung verursacht").
That error message appears twice and the file is of course not saved.
I just downloaded and installed the PSP X4 Ultimate, I'd like to try it before I buy it. When I installed the software, I tried to access"Color Working Space", because I work with Adobe1998 and I wanted to change the work space, but every time I try to access PSP crashes.
View 2 Replies View RelatedI know how to access the EXIF information inside PSP software OR from within WINDOWS but how to access it in terms of a text/DOC file so that it could be printed or used in other software?
View 4 Replies View RelatedWith Photoshop CS6 I found the plugins under filters; do I have to reload in Photoshop CC?
View 1 Replies View RelatedI have tried several times to install PaintShop Pro X4 firstly from the download and now from the CD. Every time I end up with a message saying that I already have a copy of the program installed.
View 3 Replies View RelatedPaint shop pro 4. Patches up to date. I am unable to save files my files as .jpgs. I can save them as .psp files however. I was able to save them last week, so something has changed in my settings, but where to look. 10 years using PSP and I have to say...dislike all versions after PSP XI.
View 2 Replies View RelatedI've come across an issue using X6 I haven't seen before. After working on a multi-layer pspimage file, saving it and reloading I can no longer edit one of the raster layers. When the layer is selected with the pick tool it shows the circle with line when mousing over. It was not merged or locked so not sure what's causing this and never came across this with any of the previous PSP versions I've used.
PSP X6 16.1.0.48
UPDATE: Tried making sure it was the top layer and still could not edit the layer. I then made all the other layers invisible and at that point it would allow editing the image. Is there some hidden feature in X6 I'm missing or is this a quirk?
I've just installed PSPx6, downloaded and installed updates. I'm using the 64 bit version and it will not load any plug-ins. I've set the file locations etc.
I've been using PSP since version 7, so I'm pretty capable. This is really making me angry though. It's a useless program to me if it won't utilize my Dreamsuite, KPT, Filters Unlimited, Plaid lite, and Muras copies.
I cannot edit or adjust photos at this time. the program come up ok but when I click edit there is no picture there. It is the same on adjust. Not sure if I unclicked something or what.
View 5 Replies View RelatedI have had PSP X3 for sometime but have never been able to connect to my scanner. The options for Twain acquire and Twain Source are dimmed. Everything works fine with PSP X2 but since upgrading I can no longer use my scanner. I've tried to log a question with the knowledge base but for some obscure reason I am unable to get that to work.
View 2 Replies View RelatedWhen I try to save a small jpg file I get the following:
"Because of the limitations of the specified file (and possibly the save options you've selected) the saved file will be limited to a merged image. Would you like to continue?"
I'm trying to open some AMD partner logos, and they're in EPS format. I tried opening them in PSPX2 originally, and it gave the error that "This PostScript file is either not valid or contains unsupported features" so I tried PSPX3 and the same thing is happening. I tried opening them in Notepad to see if there was anything in there to identify the program that was used to create them and it appears to be Illustrator 13. I don't have Illustrator 13, so how do I resolve this issue with PSPX3?
View 3 Replies View RelatedI have a .psp image file that the information shows the resolution as 300dpi. When I try to save it as a .png file, the resolution changes to 118dpi. It doesn't matter if I just do a Save As or File > Save for Office > Professional Printing with 300dpi, the outcome is the same.
View 14 Replies View Related