Getting the error message "Corel PaintShop Pro X4 has stopped working". So far no workaround discovered, still does not work.
OS: Windows 7 Home Premium, fully current with updates.
Memory: 8GM RAM
1 TB HD in each C; and E:
CPU: AMD Phenom 3GHz processor
GPU: ATI Radeon Graphic 3100
First installed in Windows 7 in
C:Program Files (x86)CorelCorel PaintShop Pro X4Corel PaintShop Pro.exe,
then in
E:Program Files (x86)CorelCorel PaintShop Pro X4Corel PaintShop Pro.exe (currently)
1. Installed, that error message
2. Patch, that error message
3. Removed, rebooted, e-installed, that error
4. Rebooted, reinstalled in XP, Works in XP! (I need it in Windows 7)
5. Removed ESET (needs to be relicensed anyways, this is priority right now)
6. Spybot shut down
7. Everything else works
8. Have been with PSP since JASC owned it as 4.0 (?) back in the mid 90s.
9. Frustrated with no answers, no solutions.
No AV, Spyware checkers, Malware checkers running. I took ownership of, have all permissions to and "Run as Administrator" Corel PaintShop Pro.exe
This is the application log:
Log Name: Application
Source: Application Error
Date: 1/16/2012 5:39:18 PM
Event ID: 1000
Task Category: (100)
Level: Error
[code]....
I had been using X3 for quite a while, on this ancient machine... yet today, I downloaded X4 to see how much of a difference getting that program would be.
Installation went fine.
Program started up, asked me to put in my email address for registration confirmation.. no problem.
Loading screen: Paintshop Pro X4 has stopped working. I cannot get the program to load at all. All pre-required software and updates installed.
Here's a quick screen:
X3 still runs without issue, though I am also curious as to why that program weighs in at a 1.37GB total, and X4 is only 340MB? What's missing in X4 that takes up 1GB in X3?
My PSP X1 stopped working on me (and does not want to get reinstalled), and right now, i need a tiny information: what is the max brush size in X1? Is it 500 or 999?
repeat error each and every time I use any adjustment on graphics, photos or anything I am working on with PSP X3. Am including a screen shot, edited down to the forum specifics, and I had to edit the screen capture with PSP X2 since to reload PSP X3 will now require my restarting my computer.
I have used Paint Shop Pro since it's very first incarnation as a tiny program courtesy of the folks with Jasc, so this is not my first time using the product, just the absolute worst experience doing so.
No matter what the image, file type, or set-up, when I try to make adjustments (even if I make sure to stop and make double sure they are finished processing), eventually the program locks up and I get the error shown and stated.
I have been using PSP x3 for awhile with no issues, but about a month ago, it simply stopped working. I open the program via shortcut, and the logo blinks onscreen, but the program never opens. No explanation, no trace.
I have attempted to uninstall and re-install, but each attempt to uninstall completely freezes the PC dead and I end up having to physically turn the PC off. I'm detecting no infection on the PC.
Just today, while making graphics and such, my custom fonts just stopped working all together. Every single one that I have installed just shows up as nothing and is un-selectable when using it. The one in particular that i was using is Bebas Neue. Although all installed fonts are not working either.This happened out of the blue and I don't remember hitting anything or changing anything. Just typing with the font and it refused to show.
Steps Taken: 1. Reset All Preferences 2. Shift Key Trick on Load Up 3. Restarting the Computer 4. Reinstalling PSP X2 5. Using the font in other programs - Which they WORK (Word, GIMP, Adobe Illustrator, etc.) 6. Uninstalling/Reinstalling the Font itself.
I installed Corel Video Studio Pro X4 Ultimate on my laptop at the end of last year and up until now it has been working fine. Because I was not happy with the final dvd of hd footage (I don't have a blu ray burner) despite trying all the settings I purchased Pinnacle Studio 15 ultimate because that seems to give a better result when burned to disc. At first Pinnacle was not working in that all of its elements were not accessible so I was editing my footage in Corel and then burning the end result in Pinnacle. Having gone on to the Pinnacle Forums I was advised to change from the default computer desktop theme of Aero to Windows Classic and change the display to smaller - 100%. This solved all the problems with Pinnacle and it is now working properly. However, when I tried to open Corel it came up with the message Corel Video Studio Pro has stopped working, close the programme. I have uninstalled it and reinstalled it and it still refuses to open up. Until changing the desktop theme Pinnacle and Corel did not appear to conflict with each other so I had no reason to think there would be a problem running the two applications.
I have taken a screenshot of the error message but cant seem to paste it to the post.
I now am running a Core i7 -2760 QM CPU @ 2.40 GHZ laptop 16gb RAM Windows 7 Home Premium 64 bit
The video capture function for my Corel VideoStudio12 program. When I hit the capture tab, nothing happens. Just two months ago my 17 year old son used the program without any problems. All the other functions are working (edit, effect, overlay, title, audio,).
I am not very tech savvy, so I hope there is a simple solution. I am able to capture video with Windows Movie Maker, but I prefer to use Corel as it is a much better program.My operating system is Vista Home Premium, I am using a firewire connection to a Panasonic Camcorder, model PV-GS83.
I'm having strange things go on with Paint Shop Pro. One, it stopped automatically recognizing the camera when I plug it in to upload new photos. Now I have to tell it to open the camera, and, even if I have 100 old photos and 25 new ones, it uploads all of them again! Second, the file names have changed for the photos. They've always been the date "20132713_*.jpg". Now it opens them as "001.jpg, or 002.jpg, etc. How can I get it to go back to opening with the date as the file name.....and recognizing the camera and automatically open new photos in the camera?
OK time to do something about deleting the annoying pop up that pops up about every fifth start up of x5. I'm now using my travel computer with x5 installed. I also use this computer for internet. I'm registered with Corel. So how do I stop this pop up from reoccurring?
I received this flash key with my Corel PSP X2 and it's mostly in Chinese But it Says in English it is for Vista or XP.Will it work to save folder or two in PSP Px3 Ultimate? I will use it on my computer, the note below popped up. Unfortunately it is not available for your device because of restrictions that Apple has put in place. Click here to see a wide array of the latest smartphones and tablets that do support Adobe's Flash Player.
How do I turn off the window that opens every time I open PSPX5 that says, "You must sign in to use the Corel Guide". Register? Register to the guide website?
I haven't seen the Corel Guide since I closed it the first time I opened the program nor do I want to.
Can I/How can I open old Corel .wi -files in Corel PaintShop Pro X4? I have a trial version but I could buy the program if it can open and convert those files. Is there any free converter which can do this?
I have had a lot of fun editing pictures and Photoshopping photos with jasc psp. My version stopped working so I decided to get the new version. This new version is nothing like I am used to. What is the best way to transition? I can not even figure out how to copy area and past onto another photo. Its discouraging considering I knew the other version so well.
I cannot produce Curved Lines (read: Arcs). I'm wondering if the capability to do this in the PSP X5 program is glitchy--perhaps requires a fix? Normally, I formulate short-cuts or 'tricks'--nothing has worked here for my purposes however.
I have had a Corel account for several years. I bought, downloaded, and installed PSP X6 Ultimate several days ago. When I first loaded it, a window appeared asking me to register for a "Corel PaintShop Pro X6 Membership" (Standard), or to login under my existing account. However after I fill in the blanks for either new or existing membership and click the button, nothing happens...absolutely nothing. Then a smaller window opens that asks me to sign in (or if I'm not a member, offers an opportunity to learn more about PSP X6 Membership). When I fill in those blanks and click the button, I'm notified that I am not a member, so I click the link to learn more about PSP X6 Membership and am directed back to the window that doesn't do anything.
Twice now using PSP X4 I have got a message encouraging me to complete a 5 minute survey. I take the survey, press submit at the end, and get an annoying window to a Corel X4 ad page with no browser controls. The please take a survey message window is still there underneath. When I close the Corel X4 ad window, is asks if I really want to cancel?
I recently had to uninstall PSP X3. I cannot locate the download for this version on Corel. I do see patches and updates. Where can I locate the download so it can be reinstalled?
I went through a system restore yesterday. Im not sure how maybe somebody scheduled it without me knowing. Anyway I have tried and tried to reinstall Paint Shop Pro X5 but something pops up saying "Your system has not been modified. To complete istallation another time, please run setup again."
I am starting a new threads about bumpmaps and FSX because a. I have used the wrong language for you to answer me and b. the old post provoked heated debate, which I didn't want.
OK, the answer to generating bumpmaps is that I have to move the red channel (copy?) it into the alpha channel - how do I do that? Corel is obviously not a graphics tool that is aimed at my brain... and not the way I like to think and I am missing something here.
Once I have moved the red channel contents to the alpha, I can flood fill the red with black and the blue with white - that is fine and I can do that.
Now I have to save the RGB plus alpha - for FSX use I need to save in ddsx mode - or convert to dds using "Imagetool" or "DXTBmp" - I guess saving as TGA would do the trick? Is there a better RGBA format?
Yesterday I purchased Paint Shop Pro, downloaded it along with the extras -- KPT Collection, Magic Bullet, Win Zip, etc. -- all of which I was able to load/run, but the KPT Collection of effects/filters are not available. The filters are listed under plugins on the menu, but they are not highlighted and therefore can't be accessed.
Is there something I'm missing in trying to use the KPTs or something else that needs to be done to activate them? I did a search here on the forum, but didn't see anything that related to this problem.
I have used MV's Plugins for years. They worked fine in X4, started to not work on a layer in X5, but if I flattened the layer, no problem. In X6 none work, I get an error message. I have the latest versions as far as I am aware.
I then pointed the new Xara Photo & Graphic Designer 9 to the same folder (in this case Contrast Mask) to see if it works there. No problem. Ergo: what's happened to X6 to give these errors. MV'sPlugins_not_working-X6.jpg
a) I have postscript (.ps) files for my company's logo which are in process color (CMYK).
b) These files open fine in PSP, and the colors are displayed properly. However, I understand that the files were actually converted to sRGB space, that is, I can't actually make changes in CMYK space, only in sRGB.
c) I need to make some changes to the logo, so I figured I would make the changes, then save a TIF file, using the CMYK space. My printer requires a CMYK file only.
d) Therefore, I simply saved the file opened in b) as a TIF file with a CMYK color space.
d) When I do the Save As in PSP, the file looks exactly like it did when first opened in PSP. (Update - if I close the TIF file in PSP, then reopen it, it does look different - greenish tinge, but not as bad as other viewers) But when I look at the file in other programs (IrfanView, MS Publisher, etc) the image is overly green, for example, my olive green logo components are almost bright green, and almost everything else seems to have a slightly greenish tint.
e) By comparison, if I open the postscript file in Irfanview, it renders correctly.
I thought Irfanview would input CMYK files (and apparently it does for .ps files) but my colors are wrong. Is this a TIF output issue with PSP? Or do I need to find another viewer to properly see the TIF file.
