Can I safely remove these files from my Windows Vista PC without doing bad things to PSPx4 and PSPx6?
C:UsersGregAppDataRoamingCorelMessages
I am simply trying to clean things up a bit. I found a lot of Aftershot Pro files from when I used it as a trial quite awhile ago.
How do I remove the ad nag window from Corel in PSP X2?
View 3 Replies View RelatedI just recently started having problems with my PSP Photo XI program on my laptop. The other day it would start up and run normally, but the next day when I went to run the program, it wouldn't start. My computer would freeze up and show this error message: "The application failed to initialize properly (0xc0000006). Click OK to terminate the applicaion."
I tried turning off my computer and running the program again, but the same thing came up. I tried to run the repair program on it, nothing. I even tried to uninstall PSP XI to no avail as I got a different error message: "Internal Error 2328 C:Program FilesCorelCorel Paint Shop Pro XICoreErrorCodesRC.dll"
I really don't know what to do, short of just completely resetting my laptop back to factory settings and starting fresh. But even then I don't know if that would fix the problem.
I wish I knew why the program decided to just stop working one day, as I haven't downloaded anything and my anti-virus is up to date.My computer is a Dell XPS M1710, and it runs Windows XP SP3.
Is there a Print Layout in X5 similar to that in Paint Shop Pro?
View 1 Replies View RelatedI have a scanned guest pass that is 2 color. The pass is in jpg format. although i can put it in any format necessary.
I need to change the "800" numbers on the pass. To the new number.
is it possible to remove them( numbers) and replace them, while keeping the background of the pass the same. if that make sense. I have Corel 6.
1. When to apply noise reduction is very positive and unequivocal.
2. There are no two ways about it.
3. You better get it correct.
4. You don't want your images to look like Phil's images. Read the following very carefully
PS: Is the DxO RAW converter still considered to be the best noise removal software on the market. How well will it do on my old JPEGs.
OK time to do something about deleting the annoying pop up that pops up about every fifth start up of x5. I'm now using my travel computer with x5 installed. I also use this computer for internet. I'm registered with Corel. So how do I stop this pop up from reoccurring?
View 3 Replies View RelatedI received this flash key with my Corel PSP X2 and it's mostly in Chinese But it Says in English it is for Vista or XP.Will it work to save folder or two in PSP Px3 Ultimate? I will use it on my computer, the note below popped up. Unfortunately it is not available for your device because of restrictions that Apple has put in place. Click here to see a wide array of the latest smartphones and tablets that do support Adobe's Flash Player.
View 4 Replies View RelatedWhat is the best way to take the background out of a photo or a portrait and keep the photo? Also would like to be able to keep the edge nice so when am laser engraving it will look nice, and will be able to engrave well.
View 3 Replies View Relatedhow to permanently turn off Corel's photo downloader?
View 4 Replies View RelatedHow do I turn off the window that opens every time I open PSPX5 that says, "You must sign in to use the Corel Guide". Register? Register to the guide website?
I haven't seen the Corel Guide since I closed it the first time I opened the program nor do I want to.
Can I/How can I open old Corel .wi -files in Corel PaintShop Pro X4? I have a trial version but I could buy the program if it can open and convert those files. Is there any free converter which can do this?
View 1 Replies View RelatedGetting the error message "Corel PaintShop Pro X4 has stopped working". So far no workaround discovered, still does not work.
OS: Windows 7 Home Premium, fully current with updates.
Memory: 8GM RAM
1 TB HD in each C; and E:
CPU: AMD Phenom 3GHz processor
GPU: ATI Radeon Graphic 3100
First installed in Windows 7 in
C:Program Files (x86)CorelCorel PaintShop Pro X4Corel PaintShop Pro.exe,
then in
E:Program Files (x86)CorelCorel PaintShop Pro X4Corel PaintShop Pro.exe (currently)
1. Installed, that error message
2. Patch, that error message
3. Removed, rebooted, e-installed, that error
4. Rebooted, reinstalled in XP, Works in XP! (I need it in Windows 7)
5. Removed ESET (needs to be relicensed anyways, this is priority right now)
6. Spybot shut down
7. Everything else works
8. Have been with PSP since JASC owned it as 4.0 (?) back in the mid 90s.
9. Frustrated with no answers, no solutions.
No AV, Spyware checkers, Malware checkers running. I took ownership of, have all permissions to and "Run as Administrator" Corel PaintShop Pro.exe
This is the application log:
Log Name: Application
Source: Application Error
Date: 1/16/2012 5:39:18 PM
Event ID: 1000
Task Category: (100)
Level: Error
[code]....
I have had a lot of fun editing pictures and Photoshopping photos with jasc psp. My version stopped working so I decided to get the new version. This new version is nothing like I am used to. What is the best way to transition? I can not even figure out how to copy area and past onto another photo. Its discouraging considering I knew the other version so well.
View 2 Replies View RelatedI cannot produce Curved Lines (read: Arcs). I'm wondering if the capability to do this in the PSP X5 program is glitchy--perhaps requires a fix? Normally, I formulate short-cuts or 'tricks'--nothing has worked here for my purposes however.
View 1 Replies View RelatedI have had a Corel account for several years. I bought, downloaded, and installed PSP X6 Ultimate several days ago. When I first loaded it, a window appeared asking me to register for a "Corel PaintShop Pro X6 Membership" (Standard), or to login under my existing account. However after I fill in the blanks for either new or existing membership and click the button, nothing happens...absolutely nothing. Then a smaller window opens that asks me to sign in (or if I'm not a member, offers an opportunity to learn more about PSP X6 Membership). When I fill in those blanks and click the button, I'm notified that I am not a member, so I click the link to learn more about PSP X6 Membership and am directed back to the window that doesn't do anything.
View 1 Replies View RelatedTwice now using PSP X4 I have got a message encouraging me to complete a 5 minute survey. I take the survey, press submit at the end, and get an annoying window to a Corel X4 ad page with no browser controls. The please take a survey message window is still there underneath. When I close the Corel X4 ad window, is asks if I really want to cancel?
View 2 Replies View RelatedI recently had to uninstall PSP X3. I cannot locate the download for this version on Corel. I do see patches and updates. Where can I locate the download so it can be reinstalled?
View 10 Replies View RelatedI went through a system restore yesterday. Im not sure how maybe somebody scheduled it without me knowing. Anyway I have tried and tried to reinstall Paint Shop Pro X5 but something pops up saying "Your system has not been modified. To complete istallation another time, please run setup again."
View 3 Replies View RelatedI need to remove the update notifications and messages that VS X3 displays upon startup from ever happening. Corel tech support seems clueless, they offer such as "Download and install the updates", which is not an option.
View 12 Replies View RelatedIn contrast to version PSPPX3, the new PSPX4 has implemented a tool that will remove all necessary keys and folders from your system. It works on all supported systems without problems.
follow the description below if you want to remove PSPX4 from your system.
How to remove PSPX4
Go to Start - Control Panel - Add and remove (XP) / Programs and Features (Vista, Windows 7) and remove PSPX4.
Restart the system if you want to reinstall it.
Additional note: No further action is required. Using other uninstall tools is neither good nor necessary.
I created a rectangular outline and fille the rectangle with a color. How do I remove the outline of the rectangle?
View 2 Replies View RelatedMy problem is My PSP X2 stopped working so I tried a repair all to no avail ..I then tried removing it via windows add and remove which it said it had done ..I then tried reinstalling it But a message came on the screen saying I already had PSP X2 installed on my computer still? I then used Revo unistaller program which found I still had it on my computer and which removed it (according to Revo) and again I tried to do a fresh install only to yet again get the message I had PSP X2 installed ..So somewhere in my computer PSP resides
View 2 Replies View RelatedIs it possible to remove a watermark from an image in PSPro X, if so how?
View 2 Replies View RelatedI have a picture of my self. I am clean shaven in the photo but you can see some stubble. what is the best way to remove the stubble?
View 2 Replies View RelatedThe printer setting - I could never save it.For my label printer LP2844, every time I print, it defaults to Width=4.88 and Height=11.00 and some unprintable area settings. Every time I do my first printing, I have to change it (to 4"x6"). I have gone thru my Windows printer device setting (properties, preferences, advanced, etc) and I have removed the printer device, deleted and driver, reinstalled everything and it still does it.Then I try it on another PC. Same thing.Paint shop Pro X4 Pro V14.3.0.3 licensed version. I paid for it.It seems like Paint shop saves its own printer saving somewhere and I can't re-save it.
View 1 Replies View RelatedI am very new to corel paint and accidentally added a horrible texture to an image - how to remove the texture.
View 1 Replies View RelatedI'm trying to remove skin blemishes like acne but not sure what is PSP x4's equivalent to Adobe's cloning?
It's where you can select an area that you want to fix up and when u drag the mouse anywhere else around the face, it clones that skin over the selected skin blemish.
With PaintShop Pro x6, is there a way to remove text from a shirt in the image and get the entire shirt one solid color? The shirt in the photo is not flat, it is wavy.
View 8 Replies View RelatedIs there a tutorial on how to remove lens flare in PaintShop Pro X5? I have several images that have this issue, however I couldn't find any tutorials on google for PSP specifically.
View 2 Replies View RelatedI have an issue with PSP X4; on load the program creates folders in the root of my network drive ( M: ) including:
[list=]
[*]Brushes
[*]Bump maps
[*]CMYK profiles
[*]Deformation maps
[*Displacement maps
[*]and so on...
[/list]
I have deleted these folders manually and they are recreated each time PSP launches. I have changed the settings in File -> Preferences -> File Locations to remove references to these folder locations, and then tried deleting them, but they are recreated again on load. how to remove them? They are littering my network drive...