AutoCad :: Views / Items Won't Display
May 7, 2012
I've been using AutoCAD 2011 for several months, and I'm familiar with most properties such as layers, etc.
I have 2 separate issues, which I'll explain separately.
Issue 1. I have 6-7 named views (same drawing) that I use consistently. However, only 2 of them will cause them to show up. Example: I click View #3 from Views #4,#5,or #6. Nothing happens or changes.OR I can click View #1 or #2 (which will regen/show View #1 or #2), then quickly click View #3 during #1's regeneration, and View #3 regenerates clearly.What can I do to make the others show up independently (just one click required)?
Issue 2.In 2 views in the drawing mentioned above, a couple of blocks don't show up with the rest of the views. If I enter the Regen command, and then they'll show up. If I hadn't tried it the first time, I would have probably missed the blocks entirely and re-created them.What can I do to make them regenerate correctly the first time?
View 2 Replies
ADVERTISEMENT
May 25, 2012
How to I "unhide" my photo files in My Pictures?
View 5 Replies
View Related
Feb 8, 2013
When I create a "Break" in a view, Inventor glitches. The other views, and even the border, title block, and whatever else is in the drawing, will disappear. The other items reappear if I "Zoom All". Is there an update?
View 1 Replies
View Related
Aug 29, 2011
I have two models in Revit 2011 that have items that are not showing in any views. I restored a backup and tried to copy and paste between the two models and it warns me that there are duplicate items in the same area. Once I get this message all remaining components of that type show up.
I made sure the items weren't hidden or turned off in the model and the views.
View 1 Replies
View Related
Oct 29, 2012
I created a drawing with multiple layout tabs, so as to create different maps. My display manager consists of data connections & layers added from the Layer Properties Manager. When I activate a viewport from the layout, I want to freeze some of the Data Connection items (like shp files). How can I freeze these items within the active viewport only?
View 9 Replies
View Related
Jul 26, 2013
When i bring my section views in, the cross sections display on top of each other, i attached a screen capture.
View 2 Replies
View Related
Feb 14, 2013
Sometimes when a drawing is opened in Inventor, the complete design is not visible on the sheet. Only few lines appear on the view.
View 2 Replies
View Related
Oct 25, 2012
I have 2 images that I need to see on 2 diferent views. On one view I need to see image A over image B. On the other view I need to see image B over image A. When I do the display order, it reflects on both views, so I have the same order on both views.
How can I avoid this, so that I can see different display orders depending on the view?
I am usinf AutoCAD 2010.
View 3 Replies
View Related
Mar 3, 2012
Sometimes when i creating multiple views (sections) in section display option page there are nothing displaying.(surfaces).
View 2 Replies
View Related
Sep 30, 2013
We just upgraded to Revit 2014. We had several Revit 2013 models we converted. We are now experience some visual issues within Revit. Specifically, on our Exterior Elevation views, though we are using Hiden Line display, we are seeing some "wireframe" lines, like the double line where the roof is cut, we are seeing our floor betwen levels, etc. I was wondering if it was a Service Pack issue. Issue 1 has been released. I tried to install the patch, and received an error that the product is not installed. I have also downloaded the latest certified video driver, but have not installed that till I tried to get the patch updated.
View 2 Replies
View Related
Dec 20, 2012
I was wondering if after drawing an alignment, creating a profile, and profile view, is there a way I can mark items along the alignment so they could show up in the profile view. I am laying out a pipeline and want to have the profile display a marker for items such as tees, elbows, reducers and other items. The marker I would like to use will be something like the vertical style grade break markers.
Also on a side note, as each of these items will have a different name, is there a way that I can add these markers and then have each one with a unique name?
View 9 Replies
View Related
Apr 17, 2013
I am hoping to link text items between pages and items in the drawing such as elevations?
So, ideally, I would have a front page to my drawing set, and this would have a 'Contents' type table on it, with the title name of each drawing in one column, then the drawing number in the next column. This is the tricky bit, someone must know: If i was to change the name / number of any item in this table, could it change also (linked to) the following items:
Drawing title (as a text idem on the layout sheet that that drawing relates to)
Drawing number (as a text idem on the layout sheet that that drawing relates to)
Elevation call-out (on the plan view)
And possibly:
Excel reference cell
Drawing layout tab title (this might be pushing it!!)
Perhaps this could be done by linking to an external Excel spreadsheet with these titles modified in there? I'm not sure. This would be ideal as typing into excel is a lot easier than the triple click text modify method required currently.
I waste a lot of time renaming and updating sheet names / titles / numbers. Are there standard templates for drawing sets that may have this built in available anywhere that I could try?
View 7 Replies
View Related
Apr 3, 2013
I am trying to create a second base view (using Layout/Create View/Base from model space). The problem is, I need it to be rotated from the original base view. However, when I rotate the part in model space, ALL of my views change.
So I guess my question is, how do I create multiple views of the same part that are seperate from the other base views?
View 9 Replies
View Related
Aug 29, 2013
i have views lets say 3 views on a sheet but in the list of views theres mores that appears maybe i inserted the extra views that are showing but i deleted them to put them on another sheet
the problem is they show up in the list of both sheet and i can't delete them from the list of the sheet that they were before
View 1 Replies
View Related
Jan 12, 2013
We would like to make the transparency of glass-materials visible in views and section-views by using the "realistic style". During a 3d-view our glass-material looks like transparent. Isn't it possible for REVIT to display the transparency of materials in views ?
The workaround to hide "glass" by using "overriding visibility" is not possible for us because some of our families and project families are using glass-materials inside (Showcases f.e.).
Software (German) :
RAC 2012+2013
Inventor Pro 2013
AcadM 2012
MaxDesign 2013
Sketchup 8 Pro
View 4 Replies
View Related
Nov 19, 2012
Since the end of Aug. 2012 I've been making families for a manufacturer. I left Friday evening with good families. This morning I am finding all the families I checked with a problem.
When I move the cursor across the various views it doubles the views. Rolling the mouse wheel one click either way to zoom in or out cleans the view but on the next time the cursor goes across the view it doubles it again. Now there are 4 views overlapping each other. The next time it is possibly 8, and so on. It is difficult to count them because they are overlapping but it looks like they are doubling each time.
The software is Revit Architecture 2011 and the computer is a Dell Precision T3500.Are the families corrupted or is it the computer? Is there a toggle I hit that I shouldn't have?
View 4 Replies
View Related
Jan 23, 2013
After closing and reopening my command prompt, I find that it is now at the bottom left of the screen and no longer part of the main graphics window. How can I get it to display at the bottom of the main display?
View 9 Replies
View Related
Oct 16, 2012
How do you add a display component to a display?
For example, Stairs have a stringer componet in plan display configuration but does not have a stringer componet in the Low Detail configuration. I need the stringer to show when I go to low detail how can I add a stringer componet in low detail.
View 9 Replies
View Related
Jan 28, 2013
I am currently writing a book that will initially be sold as a PDF but may later go on the i Book store, however I don't have a Retina display myself and what is the best practice for making screenshots from a normal display look acceptably sharp on a Retina display?
I have Photoshop along with the iOS simulator that shows how the iPad or iPhone will look if they can be used in some way but I mainly need to get menu items and dialogue boxes from various applications in OS X and Windows looking good on Retina screens. I really don't want to pay out for a Retina display purely for this task that would only take a few hours of work at most.
View 10 Replies
View Related
Oct 13, 2012
Sometimes this happens. At other times nothing will display at all. I have also had a portion of the picture duplicated multiple times on the stage.
View 4 Replies
View Related
Dec 4, 2011
New to this video editing game, just have a question regarding 4.3 and 16.9. i have a Canon XM2 which has a setting in the menu for 16.9 wide screen format. When this is selected on the camera the view finder shows a distored image (squshed). I have also found a setting that when 16.9 is turned off you can display 2 horizontal lines on the display. my question is am i better off shooting footage with the 16.9 turned off on the camera and then using Videostudio pro x4 to create the 16.9 format(if this can be done).
View 1 Replies
View Related
Nov 1, 2012
Quick explanation of how to make columns display as columns in the coarse level of detail instead of just as sticks?
I know I'll have to edit the family but I can see anything obvious to change.
View 1 Replies
View Related
Sep 14, 2012
I am running AutoCAD 2013, and when I shift select to unselect objects (lines, polylines, etc.) it doesn't unselect but rather a window called "Image Select" appears and asks me which image(s) I would like to select. How I can unselect items on the fly?
View 1 Replies
View Related
Jun 9, 2012
Since collections like for example the LayerTable have no Count property (as far as I can see, that is), I'm doing the following to get at the number of items:
Dim LayerCount as integer = 0
For Each Id as ObjectId in SomeLayerTable
LayerCount +=1
Next
Is this the right way to do it, or is there a more efficient way?
View 5 Replies
View Related
Sep 18, 2013
I created a drawing, saved it, and days later most lines have dissapear. At preview you can see the drawing is complete, but when you open it is incomplete. Checked the BAK file, same thing, and there are no layers shut down. What can I do to recover my drawing?
View 5 Replies
View Related
Feb 26, 2012
I have a public sub it works fine with selectionsets.
But when I want to use in a fence selection set it did not work.
I get message "number of selected object:" truly but it did not set att values.
I post the code below.
Imports Autodesk.AutoCAD.ApplicationServicesImports Autodesk.AutoCAD.DatabaseServicesImports Autodesk.AutoCAD.EditorInputImports Autodesk.AutoCAD.GeometryImports Autodesk.AutoCAD.RuntimePublic Class Class1
[Code].....
View 2 Replies
View Related
Aug 29, 2012
I'm not seeing in the tooktip display the description and ID of each Pay Item that has been assigned to a sturcture. I have gone thru Rollovertips but can't seem to locate it. Where can I find this to add to the Tooltip Display?
View 4 Replies
View Related
Mar 28, 2012
I'm creating an array using a block from an existing dwg file on my drive. When i import this block on it's own, i can explode it to ownerspace with "bref.ExplodeToOwnerSpace();" but when i'm creating the array, i don't have this ability and i'm left with one of my blocks in the array exploded, and the rest not. How do i explode the blocks in the array? When i try to use acEntClone.ExplodeToOwnerSpace(); it doesn't exist and i only have the option of acEntClone.Explode().
The Original Block
Document acDoc = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument; Database acCurDb = acDoc.Database; LayerTable acLyrTbl;
[Code]....
View 2 Replies
View Related
Jan 18, 2014
currently I am using autocad 2011. I have worked in the past on autocad 2012. in the 2012 version was a function available to "group" or "ungroup" items. in the 2011 version I can not find the function. was is something they add on in the newer version or do I just overlook it somewhere?
View 1 Replies
View Related
Nov 9, 2012
I have installed C3D 2013 and only have "Express" available on the menu bar. How can I add all the items to the menu bar?
View 5 Replies
View Related
Jan 17, 2008
I am using 2007 and cannot seem to select some text items. Happens in mt and dt in existing drawings.
View 9 Replies
View Related
