Since collections like for example the LayerTable have no Count property (as far as I can see, that is), I'm doing the following to get at the number of items:
Dim LayerCount as integer = 0
For Each Id as ObjectId in SomeLayerTable
LayerCount +=1
Next
Is this the right way to do it, or is there a more efficient way?
I am hoping to link text items between pages and items in the drawing such as elevations?
So, ideally, I would have a front page to my drawing set, and this would have a 'Contents' type table on it, with the title name of each drawing in one column, then the drawing number in the next column. This is the tricky bit, someone must know: If i was to change the name / number of any item in this table, could it change also (linked to) the following items:
Drawing title (as a text idem on the layout sheet that that drawing relates to)
Drawing number (as a text idem on the layout sheet that that drawing relates to)
Elevation call-out (on the plan view)
And possibly:
Excel reference cell
Drawing layout tab title (this might be pushing it!!)
Perhaps this could be done by linking to an external Excel spreadsheet with these titles modified in there? I'm not sure. This would be ideal as typing into excel is a lot easier than the triple click text modify method required currently.
I waste a lot of time renaming and updating sheet names / titles / numbers. Are there standard templates for drawing sets that may have this built in available anywhere that I could try?
I mistakenly created a collection when only one file was highlighted. I made another collection with all the other files I wanted in it, but I can't drag that one file from the filmstrip..
View 4 Replies View RelatedIf I specify a smart collection rule that says the source must be a collection matching some pattern, does this only apply to actual collections and exclude collection sets?
I was hoping fo a way to build a rule based on the collection set ... is this possible?
I also tried matching Any Searchable Text set to the collection set name, but that doesn't seem to work...wouldn't all photos in the collection set be associated with that string? Looks like no.
There used to be a way I thought that you could submit a new thread after doing a question search. That seems to be gone.
Is there a way to convert a collection to a smart collection?
I am using NextGEN to export images to WordPress. NextGEN created Publishing collections in Lightroom to match those in my WordPress blog. My problem is that they are not Smart Collections.
I have seen a discussion about counting bends code, any illuminated code maker to do the same but with up and down count?
View 4 Replies View RelatedI can find which images are attached to my current drawing with the following code. However, I don't know how to find out how many times they are attached.
Using tr As Transaction = db.TransactionManager.StartTransactionTryDim nod As DBDictionaryDim imageDict As DBDictionaryConsole.WriteLine("Getting ACAD_IMAGE_DICT DB dictionary")nod = CType(tr.GetObject(db.NamedObjectsDictionaryId, OpenMode.ForRead, False), DBDictionary)imageDict =
[Code].....
I need a way to count blocks (specifically employees on a production line), and I used to use a "count" lisp command that worked great. I'm thinking that lisp doesn't work in LT. I don't use Acad every day anymore, and I am quickly forgetting many commands and tricks.
View 9 Replies View RelatedI need to insert a table in paperspace tab that will continually count up blocks within a set area of model space ( i need to have 3 counts, 1 for each floor of a house i.e one table per tab for that floors blocks). I have used BCOUNT and DATAEXTRACTION but they only count it once and if i add more of a certain block it does not update the table.
im using AutoCAD 2012
In plantation design, especially for ground covers that spread across an area, I have to distinguish each plant by hatch pattern. so they're hatched(due to the twisting shapes, with oh so much pain), and the problem comes in when counting area of each plant. Mind there are altogether hundreds of hatch objects to be counted and sorted into dozens of plant types.
I had counted on data exporting, but then i find that hundreds of hatches simply don't have the area attribute. not a surprise, since hatching process was already problematic enough with the borders.
So I figured the quickest way would be to identify those without this attribute and try to fix up their borders. but you can't identify them from a data table, not without the handle number. you can't quickselect by absent attributes either. I'm completed at a dead end now.
I know there's the manual way.. but do I really have to spot those hundreds and process their borders one by one?
here's part of the problematic plan: some of the faulty hatch is colored red, but there are many more hidden in plain sight.
How to I "unhide" my photo files in My Pictures?
View 5 Replies View RelatedI'm trying to count blocks from someone elses drawings. If you double click the blocks and 'edit attributes' appears.
I have tried using the command BCOUNT and EATTEXT but it displays unknown command for each. Is it a case that you can't use these commands on 2009 LT, or perhaps it's just not possible to do it on the blocks the way I have descirbed them.
I am trying to create a new collection but I find that I do not have a "Set collection as target" (or whatever the correct phrase is, since I don't have it.) I have right clicked and examined all menu options.
View 6 Replies View RelatedI would like to count all my parts in the main assembly and assign that amount to each part.
Example: Main assembly has: 10 Parts A and 5 Parts B. I would like to run a rule that "sends" that "10" to Part A.ipt and the "5" to Part B.ipt
I would like to assign it to iProperties.Status.Status. I start to understand iLogic more and more but it is nice to get a little boost in the right direction.
Is it possible to count blocks in either the model space or in each layout? Would be very useful for fire alarm design, cause authorities require exact counts of devices.
View 9 Replies View RelatedIs there a routine that I could use to count the blocks that are in a closed polyline? The blocks may have or not one or more attributes.
In a previous session I saw a routine which was counting the blocks which had attributes in them, but it doesn't really work, because some of the blocks dont have attributes.
Also is there a routine that counts the different texts that are in the same polyline?
I was looking for a way of counting blocks inserted in my current drawing.
F1, brings up HELP.
In the search box i type BLOCKS.
Results =
Overview of Hatch Pattern Definitions
Create a Shortcut Menu
Overview of Shape files
Overview of slides
Work with User Interface Elements
Multiple Drawing Folders
What are the rules for how elements (specifically, collections and other collection sets) are ordered within a collection set?
I was trying to get a collection to appear at the top of the list of items in a collection set, but it seems to get stuffed below all the other collection sets regardless of the name given to the collection.
I am investigating the use of Photoshop to count discreet objects in a complex image. The various selection tools do a good job of automatically selecting the objects, which do not overlap, but I cannot find a count of the number. I'm using PHE 7. Does the facility exist in this version?
View 6 Replies View RelatedCounting objects in an image?
View 2 Replies View RelatedI want to count objects in a photo, by marking them (with a dot or something similar) so I know what I've already counted, and then be easily able to tell how many objects there are in the photo. Is there a way to do this in Corel Draw? I'll be counting hundreds of images so it needs to be a fairly quick method of marking each one.
View 3 Replies View RelatedI Have a clip which has numerous people coming out of a stretched limousine. The filming was set up for fun whereby we had about 50 people going in through one door but the camera was set up on the exit door.
How can I use the titles where I have a counting title on screen, adding up the total number of people exiting the limo?
I'm thinking along the lines of a car odometer where you see the mileage wheel rotating.
I have VSP x6 Ultimate
I'm trying to make thumbnails for video's for youtube. So my idea is that the nr 1 is on thumbnail 1, then on the thumbnail for the second video, it says 2, etc. But every time i have to delete the number and write a new one. Is there a way of doing that automatically? so that it just makes p.e. 10 thumbnails, with numbers from 1-10?
View 3 Replies View Related(transferring from gimptalk) -[URL] What do I do with a script?
View 2 Replies View RelatedI have been using GIMP to count the number of birds in a colony by putting a round spot on each bird using the airbrush tool. This works fine as I can size the spot to suit and alter the opacity to leave some detail. But I need to be able to count the number of spots! This should only count the spots and not every time I adjust the viewable part of the photo to keep spotting! An addon to the GIMP program would be wonderful.
View 6 Replies View RelatedI have some simple images with 5-10 different colors in them. I wanted to be able to count the number of pixels of each color in each image and compare the results.
View 2 Replies View Relatedhow to get the counting of RGB objects, CMYK Objects and Grayscale Objects information for illustrator vector(editable) file via script for windows.
In illustrator raster image file i need to know how to get the Embedded image information(CMYK or RGB or Grayscale) via script for windows. I collect these infomation manually from "Windows->Document info". I saved the "Document Info" details in illustrator manually using "Document Info Pannel".
Is there a quick and easy way to get the total number of layers in a photoshop document? I've searched high and low, and everything I've found involves scripting, which I haven't gotten into - and don't really want to spend much time on this.
View 9 Replies View RelatedI have a scene with hundreds of copies of an object. Is there a way to see a count of these objects that all have the same name.?
View 2 Replies View RelatedI have a method for converting a black and white image into instructions for folding a book into the image (URL...). To do this I count filled pixels by column if a zoomed in image. Is there a way to generate a count of filled and unfilled spaces in an image. This would speed up one of the more tedious parts of the process.
View 19 Replies View RelatedCan I use box-counting method to calculate fractal dimension in Photoshop CS6?
View 4 Replies View Related