I distinctly remember back in the day, (~2006), that you would be able to to choose the items you wanted to hatch first, then enter the Hatch command, hit OK, and your objects would be hatched. Simple! Since 2010, you have to enter the Hatch command, then hit Select Objects, then select your objects, then hit Enter, then hit OK, which I find it is less efficient.
View 6 RepliesIs it possible with the hatch command to be able to select objects first instead of picking an internal point?I looked at this thread first which covers the same problem but not sure if there ever was a solution. URL....
HPDLGMODE is currently set to 2, I tried setting it back to 1 but that brings up the hatch popup window as it does in Classic mode and 0 does the same thing as 2.
I have some blocks that are associated with regions in my drawings. I want to select regions based on attributes in the associated blocks. Is that possible?
Is it possible to link my blocks to an external database and select the regions based on a field in the linked database?
I've just encountered strange issue and I cannot find the proper solution anywhere.I work in AutoCAD for 5 years and I am used to type commands on the keyboard (I usualy don't use icons in AutoCAD).
I was used to...just cancel all previous commands by ESC key and start typing the command.But since last week I had to click in the command line to write the command in it. How to type commands without annoying clicking in command line?
In general, we can select the objects first and then run a command. I have a problem with this, autocad wont let this in my PC. If i select objects and run a command, autocad wont take the selection and prompts to select objects. I work on PC in a company connected to server, but the problem is only on my PC.
View 6 Replies View RelatedIs there any way to use the copy command in such a way that the new objects are selected when I'm done copying? Perhaps a LISP of some kind?
View 6 Replies View RelatedWhen in the hatch command in 2012 I go to select the layer I want to use, but only some of them appear in alphabetical order, and the rest seem to be all over the place making it quite difficult to find the layer I want. I've tried increasing the maxsort figure, but it makes no difference. How to make them appear in the correct order?
View 7 Replies View RelatedI am writing an add-in for Inventor 2010 where I need to get the list of entities/objects that are available through Inventor's "Select Other" functionality via the user Interface. I have looked through the list of selection tools in the API and none of them seem on the surface to be what I need.
View 3 Replies View RelatedIs there a way in the command line to select certain objects. For instance if there is a cirlce a line and a square can i just select the circle using the command line. When i try to save as an STL file i can't find it anywhere. Does surfsculpt not work? Everytime i use it it says it failed. Also when i make an ellipse is there anywhere to specify the X Y and Z lenghts?
View 6 Replies View RelatedI'm trying to hatch floor patterns in suits. I draw a pline aroudn perimeter. There are a couple of problems.
First, when I do a hatch by selecting the pline ("object"), it doesn't detect islands, such as our room tag. This is likely because the hatch is over an xref (the suite is an xref, room tag and pline are not), and hatches don't seem to like xrefs.
Next option is to hatch by "pick points". When I do that, and select a point on the floor of the suite, all of a sudden an old xref or xclip appears in 2 locations, and the hatch boundary takes the lines from that new xref into consideration. The crazy thing is that this xref does not exist in any form in the drawing. I have purged/audited the drawing, and the drawing no longer even exists in our computer.
as title if I need to select one by one，it will be too slow....Should this function be accompolished by LISP? But I am not familiar with LISP.... the situation is that I have many irregular lines distributed in disorder, and what I want to do is just lengthen these lines "3.5" Meters from the start point of each line.
If I can do this way , then I can join the line to some points correctly in Arcmap.
Land Desktop 2009 Civil 3D Companion
When I issue the Wblock Command I can not find the Dialog box to select objects and file location... This happens in the Layer Dialog when I try to change the color of a layer, the Color Dialog box can not be found. When I use the Block command the dialog box pops up, so I can see it.
fildia>1
cmddia>1
attdia>0
I have three dwg files. Each of them have separate MrSID files (image files) attached by georeference. Each file also has one or more polylines and hatch objects on top of the image.
ONE of these dwg files is causing problems. EVERY SINGLE TIME I plot the dwg file, the hatch and lwpolyline objects are UNDER the image. So I have to copy the hatch on top of itself and delete the original--then do the same with the pline.
Can Hatch Pattern Block other objects in CAD 2012 ? i.e. make other objects behind it and invisible.
View 2 Replies View RelatedHow to use the command “select similar” to be applied on a selected part of the drawing? I wanted to use the “select similar” command to select all the columns for a particular drawing on the file but not in all the existing drawings. This is why I number obtained is 60 columns not 20!
Then how to choose the “window selection” in which the “select similar” command is applied?
HOW DO YOU TURN THIS OFF????!!!!!!!
If you select an object and then drag it, it moves. This is without initiating the MOVE command and without picking any grips.
We still do all of our AutoCAD drafting in 2-D.So we don't need the ViewCube.It gets in the way and won't let us select objects underneath the ViewCube.
It is easy to turn it off by going to User Interface.BUT, is there a way to turn it off as the default.The drawing I'm in right now has the ViewCube in half of the Viewports.
i have created viewports on the defpoints layer in paper space, but now i can't select them to modify. Is there a switch or variable that allows depoints objects to be selected?
View 5 Replies View Relatedcan't select multiple objects with the grip, it work previously until someone change the variables.
View 4 Replies View RelatedI am running AutoCAD 2010 full version. Every time I select a line or a group of lines or objects. My program freezes up for a couple of seconds each time, to scan the drawing. So a task that should take 10-15 minute is turning into 25-30 minutes nightmare. Every selection I make there will appear a progress bar and the words "Scanning the drawings..." in the bottom left hand corner of the screen. Is there some setting somewhere i can turn this scanning feature off? Is this issue linked to the layer states?
View 4 Replies View RelatedI have been using AutoCAD 2010 for a while now and then all of a sudden, I am unable to select multiple lines. The only way to select more than one line for a command is to hold down the shift button and then select more lines. I think someone was playing around with the computer and must have changed a setting?
View 7 Replies View RelatedI've migrated from 2005 to 2014 LT and wondered if they have added to the hatch commands. I've looked and haven't found anything. Is there a command that you can pick a hatch pattern already shown on the drawing and make that pattern the existing one to use? I sometimes have multiple hatch patterns and scales, and wanted a quick way to go from one to another without lisp help.
View 3 Replies View RelatedMy AutoCAD Map 2014 still allows me to select objects and then type the command to, for example, delete the items. I was able to do it in my Civil3d but it seems something was toggled so that I'm no longer able to. Now if I select items, once I select a command, it essentially unselects the objects or doesn't recognize that they are selected.
View 2 Replies View RelatedIs there a way to select a number if not all objects in a drawing and then change the properties (specifically color) from the command line i.e. without a dialog window?
Custom Build with Win7 Pro 64Bit SP1
Gigabyte Tecohnology Co. X79-UD3
3.60 gigahertz Intel Core i7-3820
16GB GSkill Ripjaw Z PC3 2133 PC17000
PCI-E ATI FirePro V7800 2GB 256bit
ATA SanDisk SDSSDX24 SCSI Disk Device (256 GB)
Dell 2001FP and (2) 2407WFPHC Triple monitor setup
Question - Are you the Common Denominator?
It is no more possible open Hatch Edit dialog with double click on existing hatch. Now, this way opens only Properties
View 9 Replies View RelatedIn Quick Select command function, I want to use more properties value to select one type text or other object.
View 9 Replies View RelatedI accidentally turned something on in Autocad, and I want it to go away, I have no idea what it's called or how to get it gone. It's akin to the "select other" window in Inventor when you select at the intersection of several objects.
How do I make this go away?
Right now, when i click one object and then another, the first object becomes deselected. Holding shift is the only way for me to select multiple lines right now (other than dragging of course) but that's not what I'm used to and it annoys me a lot. At first everything is fine but then after a while it does this without me changing any options at all.
View 9 Replies View RelatedA user is having problems when using the copy command in AutoCAD 2013.
When they select objects, its not reporting on the commandline how many objects its found or keeping a running total of objects selected. Not even any duplications...
I've tested it on my machine but i cannot replicate the issue and have never come across this before!
Is it a bug? Is it a variable? User setting etc.
How to properly select a hatch? i find i'm constantly skimming my mouse all over the hatch trying to find a spot where i can actually select it... sometimes it's super super precise, and if i move my mouse even a tiny bit off it'll disappear.
View 9 Replies View RelatedI'm trying to use the hatch command on a drawing. Everything seems to work fine, but when I hit enter after having used the hatch command, selected pick points etc. nothing happens on the drawing. There are no error messages.
I can use hatch without problems on other drawings so I suspect it has something to do with the drawing or I've overlooked a setting or two.