AutoCAD 2010 :: Can't Select Multiple Objects With Grip
Feb 7, 2012can't select multiple objects with the grip, it work previously until someone change the variables.
View 4 Replies
ADVERTISEMENT
AutoCAD 2010 :: Why Can't Select Multiple Lines Or Objects Anymore
Sep 23, 2009I have been using AutoCAD 2010 for a while now and then all of a sudden, I am unable to select multiple lines. The only way to select more than one line for a command is to hold down the shift button and then select more lines. I think someone was playing around with the computer and must have changed a setting?
View 7 Replies View RelatedAutoCad :: Shift Select To Select Multiple Objects?
May 15, 2008Right now, when i click one object and then another, the first object becomes deselected. Holding shift is the only way for me to select multiple lines right now (other than dragging of course) but that's not what I'm used to and it annoys me a lot. At first everything is fine but then after a while it does this without me changing any options at all.
View 9 Replies View RelatedPhotoshop :: Move Tool Auto Select Is Not Capturing Multiple Objects Upon Drag / Select
Jun 18, 2013I know this discussion title is a bit murky, but the problem is a bit odd. I have Photoshop CS6 v13.1.2. In this version, I will activate the Select Tool, check Auto-Select: Layer, check Show Transform Controls, and then while using the Select Tool I will drag to create a rectangle to select multiple layers with content within the specified area.
Unfortunately, this action only works when I begin the selection from outside of the canvas area. If started from within the canvas area, no rectangle will appear, it will show me a measurement of my selection size, and then no layers will be selected upon release.
This cannot be working as intended right? I mean multi-select dragging cannot be intended to only work when started outside of the canvas right? Is there some way to fix this issue? Is this a bug? See the images below for more information on this issue.
AutoCAD 2010 :: Multiple Grip Selection Not Working When Pan Or Zoom During Selection
Jul 12, 2011When I select a hatch or polyline or any object with grips for that matter, and hold down shift to select multiple grips on the object or objects and then press my middle mouse button to pan or scroll it to zoom, the grips that I have selected de-select, meaning I have to set up the view so that all the grips I want to move are visible before selecting them.
This is only happening on some drawings (although it is most of them) and only when I use 2012 not 2011. Which system variable it is that has gone screwy that I need to reset? or is it something else?
AutoCAD LT :: Unable To Select Multiple Objects?
Aug 22, 2005I've been having trouble selecting more than one object with the pointer. the program was just reloaded on the computer, but this problem has happened multiple times now. everything will work fine for a while, then suddenly, when trying to select objects during a command, i can only select one. (ex. trying to copy multiple lines, i can only select one to copy at a time).
View 9 Replies View RelatedAutoCAD 2013 :: Select Multiple Objects
Sep 10, 2013I have a lot of polylines that are all over a drawing from an outside source. Unfortunately the only unique properties about them are:
AREA = .14 sq in
PERIMETER = 1-11/32"
Everything is on the same layer, color by layer and are at the same elevation.
Any way to select just these closed polylnes? I tried quickselect but the AREA option did not work (it wouldn't except just the .14 value), and there is no apparent PERIMETER value to select.
AutoCad :: Unable To Select Multiple Objects At Same Time?
Dec 3, 2012I don't seem to be able to select multiple objects at the same time, it is probably a setting that is wrong somewhere but can't find it.
View 2 Replies View RelatedAutoCad :: Select Objects In Multiple Layout Tabs?
Aug 4, 2011I want to be able to select all my viewports in all my layouts at the same time. Is this possible? Qselect only catches objects in the current tab.
View 9 Replies View RelatedAutoCad :: How To Use Command Like Lengthen In Multiple Objects By Window Select
Aug 10, 2011as title if I need to select one by one，it will be too slow....Should this function be accompolished by LISP? But I am not familiar with LISP.... the situation is that I have many irregular lines distributed in disorder, and what I want to do is just lengthen these lines "3.5" Meters from the start point of each line.
If I can do this way , then I can join the line to some points correctly in Arcmap.
AutoCAD Visual LISP / AutoLISP :: Select Multiple Objects And Change Them?
Sep 5, 2013I am trying to select multiple objects and change them. However, the following code lets me only change one at a time. Even when I select a window around obejcts, it only changes a single item.
start of Same_Cannoscale.lsp(defun C:SCS ( / anno-v ent dict cansc entsc sc-list test oce)
(setq anno-v (getvar "ANNOALLVISIBLE")) (setvar "ANNOALLVISIBLE" 1) (if (= (getvar "CVPORT") 1) (princ "
In Paperspace. ") (if (setq ent (ssget ":S:L"))
[Code] ........
AutoCAD 2010 :: Won't Allow To Select Objects Underneath ViewCube
Feb 27, 2012We still do all of our AutoCAD drafting in 2-D.So we don't need the ViewCube.It gets in the way and won't let us select objects underneath the ViewCube.
It is easy to turn it off by going to User Interface.BUT, is there a way to turn it off as the default.The drawing I'm in right now has the ViewCube in half of the Viewports.
AutoCAD 2010 :: Can't Select Defpoints Layer Objects
Jan 25, 2012i have created viewports on the defpoints layer in paper space, but now i can't select them to modify. Is there a switch or variable that allows depoints objects to be selected?
View 5 Replies View RelatedAutoCAD LT :: Grip Select Hangs?
Jan 20, 2010I am running AutoCAD LT 2008 and have started having a problem with a 2 to 3 second hang time when I select the grips on an object. The mouse just freezes up for a few seconds. It doesn't happen when I am in a command and select the object because the grips are not activated then. I have upgraded my graphics driver and reinstalled AutoCAD, with no improvement.
View 3 Replies View RelatedPhotoshop :: Multiple Selections :: Select Different Objects Once
Jul 25, 2004I have been trying to figure out if there is a way to make a multiple selection in PS 7. For example: Say you have several different colored objects on a varying back ground. Is there a way to select all of these objects at once, or must you do them all separately?
View 2 Replies View RelatedAutoCAD 2010 :: Hatch Select Objects - Classic Mode
Aug 9, 2012Is it possible with the hatch command to be able to select objects first instead of picking an internal point?I looked at this thread first which covers the same problem but not sure if there ever was a solution. URL....
HPDLGMODE is currently set to 2, I tried setting it back to 1 but that brings up the hatch popup window as it does in Classic mode and 0 does the same thing as 2.
AutoCAD 2010 :: Hatch Select Objects Based On Attributes
Mar 27, 2013I have some blocks that are associated with regions in my drawings. I want to select regions based on attributes in the associated blocks. Is that possible?
Is it possible to link my blocks to an external database and select the regions based on a field in the linked database?
AutoCAD 2010 :: Select Line / Group Of Lines Or Objects
Feb 21, 2013I am running AutoCAD 2010 full version. Every time I select a line or a group of lines or objects. My program freezes up for a couple of seconds each time, to scan the drawing. So a task that should take 10-15 minute is turning into 25-30 minutes nightmare. Every selection I make there will appear a progress bar and the words "Scanning the drawings..." in the bottom left hand corner of the screen. Is there some setting somewhere i can turn this scanning feature off? Is this issue linked to the layer states?
View 4 Replies View RelatedAutoCAD 2010 :: Pre-select Objects Before Entering Hatch Command
Jun 1, 2012I distinctly remember back in the day, (~2006), that you would be able to to choose the items you wanted to hatch first, then enter the Hatch command, hit OK, and your objects would be hatched. Simple! Since 2010, you have to enter the Hatch command, then hit Select Objects, then select your objects, then hit Enter, then hit OK, which I find it is less efficient.
View 6 Replies View RelatedIllustrator :: Select Multiple Objects On Layers Panel In CC?
Mar 11, 2014i have a guge artwork and i need to select a small groups (around 10-100) of objects from about 4000 overlayed objects and then group'em/split-to-layers for usability (This is a human body infographics for medical institute) There IS NO way selecting them from canvas because they are overlayed, and sometimes not visible at all. in CS5 there was a feature to select multiple objects by Alt+drag selection icon on the most right in the Layers Panel. Now the duplication mode turns-on when i try to perform it. So.. Ho do i select multiple object without need to click through thousands of them? (i need drag-select)
View 3 Replies View RelatedIllustrator :: How To Select Multiple Objects In Layer Panel
Sep 25, 2012I want to select a few paths in the layerpanel by NOT clicken on every one. So for example I have the following structure:
Layer 01
path01
path02
path03
path04
path05
path06
path07
path08
path09
path10
And I want to activate path03 to path09 for further modifications - I would have to select every single path by clicking on it in the Target column.
Is there a faster way like selecting path03 and than holding the Shift-key and selecting path09 ? <- (This obvious solution doesn't work)
AutoCAD Map 3D :: Fatal Error When Using Grip To Select Object
Apr 16, 2012Fatal error when using grip to select object.. Crashes
View 5 Replies View RelatedAutoCAD 2010 :: How To Select Multiple Polylines Before Typing In PEDIT
Jun 29, 2012In 2007, I was able to select multiple polylines before typeing in PEDIT. When I was done with the command, I could then type in PEDIT and L for last and it would select the multiple polylines I had first selected. We just got 2012, and when I do L now it just selects one line. Can I change this?
View 7 Replies View RelatedCorelDRAW Graphics Suite X4 :: Can't Select Multiple Text Objects
Dec 10, 2010I can't seem to select more than one text object at a time.....
I will select a paragraph or artistic text object, press and hold shift, and then continue selecting text objects. Nothing happens.... well, it seems to be 'thinking' but nothing ever happens until I release the shift key and then only the last object selected gets highlited.
Illustrator :: Direct Selection Tool To Select Multiple Objects
Nov 21, 2013When I use the direct selection tool to select multiple objects that also contain an image within a clipping set, occasionally the clipped image is included in the bounding box, even if it and its clipping mask are not selected. Selecting other objects includes them in the bounding box, but even after deselecting everything the bounding box around the image remains and the only way to remove it is to drag a handle (which resizes the image) and then undo the action. Obviously this is annoying and seriously interrupts workflow. I've had this issue ever since CS4.
View 10 Replies View RelatedIllustrator :: Select Multiple Objects Faster On Layer Panel?
Nov 1, 2012Is it possible to select a few objects by "sliding a mouse", on layer panel? For example, you can hold down the mouse, slide to lock multiple objects. It's fast and easy!
But if I need to select, say, only red, blue, yellow stars... I need to click the ◎ icons to select each sublayer. when I have so many objects to be selected on layer panel.
I use CS6 on Mac. Is there any secret shortcut key to select objects on layer panel by "sliding a mouse"?
AutoCAD 2013 :: When Select More Than 100 Entities All Of Grip Points Disappear?
Sep 27, 2012When I select more than 100 entities all of the grip points disappear. With ACAD 2002 there seemed to be no limit to the number of entities you could select without losing the grips, but with ACAD 2007 they started dissapearing though with '07 clicking "View" "Regen" would bring them back into view (unless you accidentally click on another entity). With ACAD 2013 if I go over 100 that's it. This is mostly a problem for me as I use the spacebar shortcuts extensively in creating and manipulating my drawings. I have found other ways to to acomplish my needs such as using the move command but I have much successful history using my old methods and would like to continue with them.
View 3 Replies View RelatedAutoCAD 2010 :: Can't Use CTRL Or SHIFT To Select Multiple Things (not Really DWG Related)
Sep 4, 2013So this really doesn't have much to do with objects in a drawing. Say for instance, I go into the PURGE dialogue box, and I want to select multiple layers to purge, but not all of them. If I click a layer, and the hold CTRL and click other layers, the only one that stays highlighted is the one I just clicked...so using CTRL doesn't allow me to highlight multiple entities at the same time.
It's gets a little more weird using SHIFT. The conventional SHIFT method (works in Windows Explorer and other applications) is clicking an object, holding SHIFT, and then clicking another object further down the list...this will highlight both of those entities clicked, plus every single entitiy in between them. In AutoCAD (use the PURGE dialogue box again for reference), if I click an object, hold SHIFT and click an object down the list, it will highlight the last object clicked and everything in between the two, but it will deselect the original object. Also, if I use SHIFT to select multiple objects, and then go back to the original that was deselected and hold CTRL to select it, the last object that was selected using SHIFT gets deselected.
AutoCAD 2010 :: Exporting STL With Multiple Objects
Aug 5, 2013I am exporting a design for 3D printing, and it includes multiple objects. If I save each part as a separate STL file, and assemble them in my 3D printer software (Object), the alignment of different parts is lost.
If I save it as a single STL file all the objects are grouped, and I cannot select them individually to assign them different properties.
I am using Autocad 2012 student version, and it does not allow me to select any option at the moment of exporting the files.
AutoCAD 2010 :: Unable To Select Multiple Grips Using Shift / Pick In Drawing
Mar 29, 2012I have a drawing where i am not able to select multiple grips using shift/pick to make the grips "hot". I'm not able to make even one of the grips of a poly line "hot". However, while trying to solve the problem, i've opened another drawing where i AM able to make grips "hot". It doesn't appear to be a system setting issue.
View 6 Replies View RelatedAutoCAD 2010 :: Base View In Multiple 3D Objects
Sep 11, 2013I have this problem with my drawing. before I decided to post here, I first ask mr. google about the problem but to no avail. anyway, here's my problem:
I have this drawing. 3d object. with multiple items. and would like to create a 2d detailed view of the items.
what i did was isolate the first item and did the base view command. after the command, I then hid the first item and isolate again the second item. but then I always get this pop-up menu that says "A model has changed" and my item is missing. I ignored the warning and poceeded with my second model and so, on. after the process I unisolated all my items and most of the drawings are there and some are lost. Is there a proper way of doing this base view for multiple objects without disrupting the previous drawing that I objects?