I am running AutoCAD LT 2008 and have started having a problem with a 2 to 3 second hang time when I select the grips on an object. The mouse just freezes up for a few seconds. It doesn't happen when I am in a command and select the object because the grips are not activated then. I have upgraded my graphics driver and reinstalled AutoCAD, with no improvement.
View 3 RepliesFatal error when using grip to select object.. Crashes
View 5 Replies View Relatedcan't select multiple objects with the grip, it work previously until someone change the variables.
View 4 Replies View RelatedWhen I select more than 100 entities all of the grip points disappear. With ACAD 2002 there seemed to be no limit to the number of entities you could select without losing the grips, but with ACAD 2007 they started dissapearing though with '07 clicking "View" "Regen" would bring them back into view (unless you accidentally click on another entity). With ACAD 2013 if I go over 100 that's it. This is mostly a problem for me as I use the spacebar shortcuts extensively in creating and manipulating my drawings. I have found other ways to to acomplish my needs such as using the move command but I have much successful history using my old methods and would like to continue with them.
View 3 Replies View RelatedBefore I will explore Grip Overrule world I have one question. Is it possible to add new grip points into Entity?
View 6 Replies View RelatedI am trying to create a wall tag to do the following also see attached PDF:
Tag designation (text and number) generated from wall style (wallstyles:type) and be annotative.
Tag has 2 lines forming an L that I would like to preset (12" by the text and 18" long) but have the capability to be stretched/stretchable later on.
Tag has grip hand similar to doors which enables it to be attached to walls but doesn't change placement when wall is extended/trimmed/ moved or wall tag generates information from the wall it touches but if the wall moves the tag would stay but show and error or "X".
In authoring fasteners, what Grip Length refers to?
View 2 Replies View Relatedi know how to insert a pdf, but im wondering how i can get the logo into CAD with out having the grip square around it. is it possible or do i have to trace the logo by hand to get into my template?
View 3 Replies View RelatedI'm wondering if there is a way to do two things with a block.In the attached drawing, I have a block, Block01. There are 2 visibility states: stretch with 90 degree ends, and stretch with angled ends.
I'd like for the grips for the other parameters to move with the block when I stretch one grip. For example: If I stretch the object with the 90 degree end, I'd like the grips for the angled ends stay in the same position relative to the corners of the object.
I'd also like to have a parameter that reads the angle when stretching with the "stretch with angled ends parameter.
I know you can add a connection grip point to newly created sketch symbols, but how do you add it to the existing Rev Block from Inventor right out of the box? You can't edit the definition of the Rev Block, I'm stumped. I need to do this so my Rev Block is attached to the titleblock top right corner so when changing border sizes, it follows the top right corner.
View 2 Replies View RelatedOne of our AutoCAD stations handles Grips differently than the others.That station does not have the new Rectangular Grip at the midpoint of a Polyline's Line segments.
When I open one of his drawings, the Polylines DO have the Rectangular Grips at midspans.I haven't been able to find a Setting that controls this.
A grip of a hatch is not snapped to another, In the attached screenshots, I tried to move the indicated grip to a target one but no “sign” for snaps is shown!
The screenshot and the dwg are attached. How these two grips can be snapped?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I am trying to create a wall tag to do the following also see attached PDF:
Tag designation (text and number) generated from wall style (wallstyles:type) and be annotative.
Tag has 2 lines forming an L that I would like to preset (12" by the text and 18" long) but have the capability to be stretched/stretchable later on.
Tag has grip hand similar to doors which enables it to be attached to walls but doesn't change placement when wall is extended/trimmed/ moved or wall tag generates information from the wall it touches but if the wall moves the tag would stay but show and error or "X".
It didn't sound so difficult in my head but writing it down makes it seem very difficult. Anyways is this possible or any source to some step by step directions for creating a tag like this?
Trying to remove multiple hatch grips. Since 2011 brought in the pop-up option, single grips can be removed with this method. But when I want to delete a larger number of grips at once, I can't achieve the required result. Process is as follows:
1. Select Hatch itself
2. Holding SHIFT, select multiple grips (which turn from blue to red)
3. Then 1 left click on a grip, and scrolling through the options using CTRL key until I arrive at 'REMOVE'. Then another left click and nothing happens!
I am wanting to make a grip that slides along a polyline. Similar to the diamond shaped grips used in Civil3d to slide along alignments and pipe objects to pick stations and insert labels. How this can be done in .net.
View 5 Replies View RelatedHow come I can't do grip edits on MPolygons in Map 2011? I might be mistaken but I was sure we could do this in 2010 couldn't we?
View 5 Replies View RelatedI'm having a problem with some annotative text. The text is set to "match orientation". which is fine, except the text rotates on the grip tab on the lower left of the text instead of the insertion point.
This is how it should look with the two bits of text above each other, except matching orientation:
MODEL.jpg
This is how it does look:
VPORT.jpg
the lot number is justified to the bottom center, and the area to the top center, so in theory, they should show correctly at any orientation.
What might be the cause of a several moment delay when selecting objects and/ or their grip points. It doesn't occur when a command is entered first. The longer a drawing is open the worse it seems to get. Is there any fix or adjustment that can be made?
View 2 Replies View RelatedI recently purchased LT 2012. I was using LT 2008 until now. When I grab a line from the endpoint grip and try to lengthen it by typing in a value it either shortens the length by the value I type, changes the overall length to the value I type, or does what I want it to- actually makes the line longer by the value I type but doesn't do any of these consistently. It didn't do this in any older version I've used and I can't find a setting to change it.
View 9 Replies View RelatedIn previous versions, grip editing a point from one place to another maintained the point elevation regardless of how the point was moved. For instance, drag it from it's current location and snap to the end of a line. In 2013 the point elevation now changes to match the elevation of the point snapped to.
Is there a new setting to control how points react to Osnaps? Or are we now expected to use the .XY filter (without ever being notified of this change in workflow)?
Any way to remove the alignment grip (the blue triangle / square thing) when you're creating a dynamic block?
I know you can remove the stretch grips and such, but I don't need an "alignment grip" and it's just another symbol that will confuse my users / clutter the block up.
I changed something about how AutoCAD displays and enters data for block grips.
It used to display the current value for the parameter when I dragged a grip. For instance grabbing a grip for a linear parameter would give me the current length of the parameter and if I typed 24" into the dynamic input it would change the parameter's value to 24"
Now the grips behave as if they were ordinary entities. For example if I grabbed a linear grip that had a value of 12" the displayed value is 0. As soon as I move it displays the value of the difference. Stretching it to 16" will display 4" when it used to display 16". If I were to type in 16" however the parameter shoots to 28" (12" + 16")!See, it's giving me the polar distance I dragged the grip and not 2'-2" (the value of the linear parameter) like it should.
AutoCAD 2010
AutoCAD LT 2013
My road corridor regions can't be stretched using the region grips when 'geometry locking' is on, grip stretch works when i change the locking option to 'station locking', but it used to work fine also with geometry locking on.. It has happened somehow to all my files, so it seems to be caused by some application setting, the corridor regions can be stretched from grips fine on other pc's. (C3d 2013)
View 6 Replies View Relatedi thought we can grip edit a horizontal alignment? - when does it not work or not applicable because when I tried to change part of my alignment it did not work?
View 3 Replies View RelatedIt seems there have been a change in some system variable i ACAD2012 that changes the way a line lengthens when you use the grips.
I want the length to change relative to the selected grip not determine the total length of the line!
I'm guessing that it have something to do with polar tracking, if I turn it of the stretching works the way I want.
If you can get the co-ordinates of the centroid / label grip point of a parcel.
View 5 Replies View RelatedA simple dynamic block using a Block Properties Table to control the value of an attribute. The block also has flip & rotate actions, but I cannot get the Block Table grip to flip or rotate with the rest of the block even though it is part of both selection sets.
View 1 Replies View RelatedIn previous versions of Civil 3D there was a grip on the point marker that allowed me to rotate the block used as a point marker, where did this grip go in 2013? How can I rotate an individual point marker without having to create a separate point style?
View 1 Replies View RelatedHave dynamic block w/ Block Properties table. Can use table to change size of block by picking from dropdown list. Would like move (insertion) point of entire block to always remain exactly centered in block. Block is simply a rectangle. Have tried setting insertion point using point filters (.x of mid of horiz line, yz of mid of vert line, etc,) but all this does is assign an absolute value to the insertion point. When the size of the block changes, the insertion point remains where it was (absolute position).
Have tried creating a base point parameter, but it will not let me use geometric constraints to define position (coincident w/ endpoint) or add parametric dimension so cannot define location by using formulas (d2 =d1/2, etc). Have kludged it by using dummy point at 0,0 and "fixing" it.
Same thing for location of properties table - how do I tell it to attach the properties table grip "coincident" to the lower right corner of the rectangle so it follows the corner when the size changes?
Have attached what I have so far.
Ultimately want to also place the text "Case 1" "Case 2" etc as read from the properties table in the middle of the rectangle so that when I explode the block the text remains.
Exploring a new field in LT here, was wondering if it's possible to use a flip-grip kind of parameter to control the scale of an object, kind of like an on/off switch.
In this case I have a straight line that is about 15mm. What I want is to be able to click a grip and it disappears ( scales down ) and when I click it again it reappears ( scales up ).
I know that this is possible through a lookup parameter or just a similar effect with a stretch grip, But I want to be able to just click a grip like the one for Flip and it re/appears.
I'm having all kinds of trouble with these dynamic blocks.
This one should be simple, but I can't even get it to work! Please take a look at the drawing... when you flip it, it flips everything (as it should), but the stretch grip goes "up", instead of staying in the middle of the box in the flipped state.