I've got to create a dynamic block for Rebar, with symbols (which are blocks) at two end of the bar line can be changed scale follow annotation scale changes.
The problem is after I have stretch the linear grip to change the length of the rebar, if I change to another annotation scale, the sybol block auto jump to the original position, not at the ends of line as I expected. How to keep the symbols at ends?
Is it possible to change the length of a line based on the length of an attribute?
I'd like to make the line a MINIMUM length of X" (I haven't decided how long yet--but know I'll need a minimum). But then after the user fills in the attribute, I'd like the length of the line to change to the length of the attribute plus a small amount (again, I haven't decided yet how much extra).
I have been practicing using a older book(copyright 1990) and it has some decent exercises in it. I was able to do this one but it seems I can"t find the proper way to do this..First drawing a line a certain distance..ortho on,click the first point anywhere,move curser to the left and click again. that gives me a line at 180 degrees at what ever length..Line command again starting at the second point of the first line..after clicking that point,I type in @2.38<150 that gives me a line2.38 long at 150 degrees..now how do i make a third line relative to the second line so that the angle is 75 degrees and a certain length..the picture shows what I am trying to draw..using the polar cordinates you get an angle based off the UCS( which is set at world) when you try to draw the third line ..that makes the angle between line 2 an 3 not the angle that I want..To make the drawing,I rotated the ucs -30 degrees..But there has to be a better way than that..
What controls origon (x,y = 0,0) of a objects coordinates? I'm not refering to which the "Reference Point".I use a bunch of artboards and sometimes origon originates from the newest artboard i have created, which is great for my workflow. I place a lot of objects using the top coordination tool.
But often the origon fixes it's position to the first artboard. Is there a way to control the origon?Specs: Win7, 64bit, Illustrator CS6 16.0.3.
What is the system variable to change the display of grip dimensions from decimal to architectural? Specifically I am referring to the dimension associated with a grip(s) when hovering over it.
I need a lisp file that can read the total length of selected object (lignes, polylines) and summarize them by layers or by color in a table
e.g
command:tl (total length) select objects found total length....... select object (Ent) total length or [Add/Subtract/Table] : total length = ....... if table Enter an option by [ Layer/Color/line Type/line Weight] <layer> :
I have a lot of drawings that someone inserted the Xref's, but the Xref's are "Attached, and Full Path"; however, I need to change them to "Overlay, and Relative Path".
I have selected several lines (not pl or spl), just lines, all of which are the same layer and such. I want to be able to select all thirty or forty of the lines using either the select similar (lisp, AC2010) or quick select and return a total length of all of the selected lines. In the properties box it shows as varies.
I got this code below to place a channel in an assembly, but don't know how to change the length of the steel.
' Set a reference to the active assembly document. Dim oDoc As AssemblyDocument oDoc = ThisApplication.ActiveDocument ' Set a reference to the ContentCenter object. Dim oContentCenter As ContentCenter oContentCenter = ThisApplication.ContentCenter ' Get the content node (category) "Structural Shapes:Channels" Dim oContentNode As ContentTreeViewNode [code]..........
I have many drawings that were created with the xref's as full path and I need them to be relative path. I would just go in and reatch them as relative path but the drawings are complete and there are different layers frozen in each one.
This is my first time using Inventor but I've been using ProE for several years in school. A friend of mine told me about a feature in ProE where you are able to define a part and then define one of the lengths as it is placed into an assembly. For example I would define a 2x4 part with a length of 84inches. If I wanted a 2x4 of 68inches in my assembly I would use the same file but simply change the 84 to 68. How can I do this with Inventor?
I need a Reactor to Modify Xdata - Length - contained in Line Object if this Line is modified (stretched, breaked, trimmed, etc).The routine need to verify if Line contain Xdata and modify it (and works with multiple selection).
I tried for long hours, but without success. I tried to create a list of entities while the reactor is applied, but doing so need another reactor to change these entities after the first Reactor works.The codes I used are below:
{code} ;If it just 1 string only you want to add (defun add_xdata_str (e a v);;;EName APPID String_value (and (not (tblsearch "APPID" a)) (regapp a)) (and (= (type e) 'ENAME) [code]....
I was wondering if there is a way with DB's to have a line "follow" or "grow" with the content/value length of an attribute. Maybe some method of linking the attribute width to length of the line? Essentially, it would work just like turning on the underline setting when typing in mtext editor (or any program with an underline option for that matter), expect that the line could be placed anywhere, and would not have to reside directly below the text.
With using superelevation wizard in Civil 3d 2012, changing the lane width is not affecting the resulted values of transion length and run-off length, Is that correct ? ( as civil is using standerd AASHTO tables which assume that lane width typically is 3.6m )
Also, There is only 2 tables for 2-lanes and 4-lanes roadway, Is it for total road width or for one directon only, and what about different no. of lanes ?
I am creating a block with attributes for a standard job. I have (4) total attributes in this block (for example: panel type, qty, length in imperial, length in mertic)
I would like my length in metric attribute to automatically populate based on the input from length in imperial.