I have been trying to figure out if there is a way to make a multiple selection in PS 7. For example: Say you have several different colored objects on a varying back ground. Is there a way to select all of these objects at once, or must you do them all separately?
View 2 RepliesI know this discussion title is a bit murky, but the problem is a bit odd. I have Photoshop CS6 v13.1.2. In this version, I will activate the Select Tool, check Auto-Select: Layer, check Show Transform Controls, and then while using the Select Tool I will drag to create a rectangle to select multiple layers with content within the specified area.
Unfortunately, this action only works when I begin the selection from outside of the canvas area. If started from within the canvas area, no rectangle will appear, it will show me a measurement of my selection size, and then no layers will be selected upon release.
This cannot be working as intended right? I mean multi-select dragging cannot be intended to only work when started outside of the canvas right? Is there some way to fix this issue? Is this a bug? See the images below for more information on this issue.
Right now, when i click one object and then another, the first object becomes deselected. Holding shift is the only way for me to select multiple lines right now (other than dragging of course) but that's not what I'm used to and it annoys me a lot. At first everything is fine but then after a while it does this without me changing any options at all.
View 9 Replies View Relatedhow to convert multiple selections to multiple layers or multiple files with one go?
View 6 Replies View RelatedI've been having trouble selecting more than one object with the pointer. the program was just reloaded on the computer, but this problem has happened multiple times now. everything will work fine for a while, then suddenly, when trying to select objects during a command, i can only select one. (ex. trying to copy multiple lines, i can only select one to copy at a time).
View 9 Replies View RelatedI have a lot of polylines that are all over a drawing from an outside source. Unfortunately the only unique properties about them are:
AREA = .14 sq in
PERIMETER = 1-11/32"
Everything is on the same layer, color by layer and are at the same elevation.
Any way to select just these closed polylnes? I tried quickselect but the AREA option did not work (it wouldn't except just the .14 value), and there is no apparent PERIMETER value to select.
I don't seem to be able to select multiple objects at the same time, it is probably a setting that is wrong somewhere but can't find it.
View 2 Replies View Relatedcan't select multiple objects with the grip, it work previously until someone change the variables.
View 4 Replies View RelatedI want to be able to select all my viewports in all my layouts at the same time. Is this possible? Qselect only catches objects in the current tab.
View 9 Replies View Relatedi have a guge artwork and i need to select a small groups (around 10-100) of objects from about 4000 overlayed objects and then group'em/split-to-layers for usability (This is a human body infographics for medical institute) There IS NO way selecting them from canvas because they are overlayed, and sometimes not visible at all. in CS5 there was a feature to select multiple objects by Alt+drag selection icon on the most right in the Layers Panel. Now the duplication mode turns-on when i try to perform it. So.. Ho do i select multiple object without need to click through thousands of them? (i need drag-select)
View 3 Replies View RelatedI want to select a few paths in the layerpanel by NOT clicken on every one. So for example I have the following structure:
Layer 01
path01
path02
path03
path04
path05
path06
path07
path08
path09
path10
And I want to activate path03 to path09 for further modifications - I would have to select every single path by clicking on it in the Target column.
Is there a faster way like selecting path03 and than holding the Shift-key and selecting path09 ? <- (This obvious solution doesn't work)
I can't seem to select more than one text object at a time.....
I will select a paragraph or artistic text object, press and hold shift, and then continue selecting text objects. Nothing happens.... well, it seems to be 'thinking' but nothing ever happens until I release the shift key and then only the last object selected gets highlited.
I have been using AutoCAD 2010 for a while now and then all of a sudden, I am unable to select multiple lines. The only way to select more than one line for a command is to hold down the shift button and then select more lines. I think someone was playing around with the computer and must have changed a setting?
View 7 Replies View Relatedas title if I need to select one by one，it will be too slow....Should this function be accompolished by LISP? But I am not familiar with LISP.... the situation is that I have many irregular lines distributed in disorder, and what I want to do is just lengthen these lines "3.5" Meters from the start point of each line.
If I can do this way , then I can join the line to some points correctly in Arcmap.
When I use the direct selection tool to select multiple objects that also contain an image within a clipping set, occasionally the clipped image is included in the bounding box, even if it and its clipping mask are not selected. Selecting other objects includes them in the bounding box, but even after deselecting everything the bounding box around the image remains and the only way to remove it is to drag a handle (which resizes the image) and then undo the action. Obviously this is annoying and seriously interrupts workflow. I've had this issue ever since CS4.
View 10 Replies View RelatedIs it possible to select a few objects by "sliding a mouse", on layer panel? For example, you can hold down the mouse, slide to lock multiple objects. It's fast and easy!
But if I need to select, say, only red, blue, yellow stars... I need to click the ◎ icons to select each sublayer. when I have so many objects to be selected on layer panel.
I use CS6 on Mac. Is there any secret shortcut key to select objects on layer panel by "sliding a mouse"?
I am trying to select multiple objects and change them. However, the following code lets me only change one at a time. Even when I select a window around obejcts, it only changes a single item.
start of Same_Cannoscale.lsp(defun C:SCS ( / anno-v ent dict cansc entsc sc-list test oce)
(setq anno-v (getvar "ANNOALLVISIBLE")) (setvar "ANNOALLVISIBLE" 1) (if (= (getvar "CVPORT") 1) (princ "
In Paperspace. ") (if (setq ent (ssget ":S:L"))
[Code] ........
Say you have several items selected with a marquee.Something like this:Is there anyway, to have, in this example, all the icons cut and pasted to their own layer?
View 6 Replies View RelatedI am using PS CS2, what I need to know is this, how do I draw a line with the pen tool and also draw another line with the pen tool but not have them connect?
View 9 Replies View RelatedI have over 600 images of trees. What I need to do is figure out the dimensions of each tree's crown (not the trunk, so select all the foliage and record the dimensions. Is there a way to automate the process so that I don't have to manually mask it or select it for each of the 600+ files or is it something I have to do manually?
View 1 Replies View RelatedI have long used the following lisp to convert multiple single text objects into multiple mtext objects (i.e. make each text entity into separate mtext entities).
; T2M - convert individual Texts/Dtexts to individual MTexts
; modified by Xanadu - www.xanadu.cz
;
(defun C:T2M (/ ss i elist)
[Code]....
However, the mtext entity always moves position slightly (compared to the original text entity) after converting the object. better lisp that converts multiple text entities into mtext entities (which are all separate still, i.e. not joined together) without the position of the entity changing?
i am trying to make multiple selections using the magnetic lasso and i cant figure out what im doing wrong. first, i have selecte d the outer perimiter of the object. next, i tried to select the holes within the object for a clean cut out by using the shift key but after i finish my selection and release the shift key my selection doesnt turn into marching ants.
View 1 Replies View RelatedI have a list box with multi select (simple) enabled. How can I "see" the text of the values the users selects (if there is more than 1)..
vb.net if you can.
I use the intelligent scissors quite a bit. In some instances, my picture is not a clear cut selection to where I can go around an place anchor points. For instance where the legs of animals cross over each other and pieces of the background show through the legs. Can multiple selections be made with the intelligent scissors? Or am I using the incorrect tool.
View 2 Replies View RelatedWhy not have a swipe option for the Record viewer on the right side in Thumbnail View and allow locking the source thumbnails to sync with each other - Flame style (just no Reel view). If this could be saved with the current folder view it would largely cover a toolset comment I made before plus another great way to edit quickly.
who said that for editing there should only be one source window ? Why not multiples ? In fact, isn't that a large part of editing in the first place ? Allow multiple selections in the thumbnail view and link the sources together, select a point in the timeline and go to town for checking your editorial options.
This is really about gaining a functionality that’s around in AVID and used extensively by editors I’m trying to get on board with considering smoke as a real alternative. The Reel Locking mechanism in Flame is a great tool that could be expanded upon massively and brought into smoke via synched/locked multiple selection in the thumbnail view.
And another - The ability to see an edit as thumbnail view that can be re-arranged so you can group shots per your own liking but still allows drag and drop FX. This would allow another view on an edit that is incredibly powerful for many functions but color correction an obvious one. If you could save these 'views' you could have a fantastic basis for management.
How to export multiple selections as each selection to export to tiff despite of single tiff.
View 2 Replies View RelatedHow do I create a listbox in iLogic that allows for multiple selections?
View 3 Replies View RelatedI accidentally turned something on in Autocad, and I want it to go away, I have no idea what it's called or how to get it gone. It's akin to the "select other" window in Inventor when you select at the intersection of several objects.
How do I make this go away?
A user is having problems when using the copy command in AutoCAD 2013.
When they select objects, its not reporting on the commandline how many objects its found or keeping a running total of objects selected. Not even any duplications...
I've tested it on my machine but i cannot replicate the issue and have never come across this before!
Is it a bug? Is it a variable? User setting etc.
Imagine a layer containing 10 squares, each square is isolated (none are touching). I need a quick way to put each of those squares on its own layer. Is there something already built in, or any plugin or action?
View 12 Replies View RelatedI am trying to fill a selection in one picture with a selection from another picture. I am having problems scaling the selection to fit exactly. i still have an outline from the other (previous) selection.
I opened both images up side by side, Adjusted the view on both to 33%, made my first selection, hit control + c, made my selection on the other picture (Exact same shape), hit control + v + shift, then edit>transform>scale, then shift+drag.
Can't get it to line up. I also tried layering the two images then reducing the opacity of just the selection, but photoshop reduces the opacity of the entire layer instead of just the selection,