GIMP :: Intelligent Scissors - Can Multiple Selections Be Made?

Dec 26, 2013

I use the intelligent scissors quite a bit. In some instances, my picture is not a clear cut selection to where I can go around an place anchor points. For instance where the legs of animals cross over each other and pieces of the background show through the legs. Can multiple selections be made with the intelligent scissors? Or am I using the incorrect tool.

View 2 Replies


ADVERTISEMENT

GIMP :: Using Path And Intelligent Scissors Tools To Remove Text

Aug 26, 2011

I'm just getting the hang of GIMP and up and running on a project, until now. For some reason, I'm not able to get the kind of selections I want from using the Path and Scissors tools. Large pieces of the letters get cut off and its frustrating to say the least. I've heard about the edge logic problems and actually found out how to use the Path tool as a result. This still happens with Scissors after I've jacked the contrast all the way up, and its already in bw.

Now the obvious fix would be to just type what I'm wanting and go from there which should be simple. BUT, I'm not quite to the point where I can build it from scratch and the font is fairly specific.

View 1 Replies View Related

GIMP :: Use I Intelligent Scissors Tool / Paste Into Windows With Transparent Background

Jan 10, 2014

I know how to use the "I" intelligent scissors tool and paste into a window with a transparent background.

But I saw a NASA video where this very intricate tree with branches and no leaves was made into a PNG perfect. Then they had the stars moving behind it. They didn't use a scissors tool. There was too much detail.

View 2 Replies View Related

GIMP :: Adjusting Feather Using Scissors?

Sep 20, 2012

What is the easiest way to preview the result of adjusting feather while removing the background of an object with scissors? So far, I know only irreversible way of using scissors - if I guess the feather factor incorrectly, I have to redo the work of the selection of the object with smart scissors.

View 2 Replies View Related

Photoshop :: Multiple Selections To Multiple Layers Or Multiple Files With One Go?

May 26, 2013

how to convert multiple selections to multiple layers or multiple files with one go?

View 6 Replies View Related

GIMP :: Tool / Plugin For Gimp To Transform Selections

Sep 18, 2011

I have checked the road map for GIMP and I have seen that the Unified transform tool can be expected in version 3.8. (ugh)

Now what I would like to ask is there any tool or plugin for GIMP that can transform my selections? Or is there any open source image editor that can do it.

I'm not an artist and just for this I have to use Photoshop. For me PS is an overkill for just cutting up an image.

View 3 Replies View Related

Photoshop :: Cut And Paste Multiple Selections To...

Jun 25, 2009

Say you have several items selected with a marquee.Something like this:Is there anyway, to have, in this example, all the icons cut and pasted to their own layer?

View 6 Replies View Related

Photoshop :: Multiple Selections With The Pen Tool

May 23, 2008

I am using PS CS2, what I need to know is this, how do I draw a line with the pen tool and also draw another line with the pen tool but not have them connect?

View 9 Replies View Related

Photoshop :: Automating Selections In Multiple Files?

Mar 27, 2012

I have over 600 images of trees. What I need to do is figure out the dimensions of each tree's crown (not the trunk, so select all the foliage and record the dimensions. Is there a way to automate the process so that I don't have to manually mask it or select it for each of the 600+ files or is it something I have to do manually?

View 1 Replies View Related

AutoCAD .NET :: Listbox And Reading Multiple Selections

Jun 2, 2011

I have a list box with multi select (simple) enabled. How can I "see" the text of the values the users selects (if there is more than 1)..

vb.net if you can.

View 6 Replies View Related

Photoshop :: Multiple Selections :: Select Different Objects Once

Jul 25, 2004

I have been trying to figure out if there is a way to make a multiple selection in PS 7. For example: Say you have several different colored objects on a varying back ground. Is there a way to select all of these objects at once, or must you do them all separately?

View 2 Replies View Related

AutoDesk Smoke :: Allow Multiple Selections In Thumbnail View

Jul 5, 2012

Why not have a swipe option for the Record viewer on the right side in Thumbnail View and allow locking the source thumbnails to sync with each other - Flame style (just no Reel view). If this could be saved with the current folder view it would largely cover a toolset comment I made before plus another great way to edit quickly.

who said that for editing there should only be one source window ? Why not multiples ? In fact, isn't that a large part of editing in the first place ? Allow multiple selections in the thumbnail view and link the sources together, select a point in the timeline and go to town for checking your editorial options.

This is really about gaining a functionality that’s around in AVID and used extensively by editors I’m trying to get on board with considering smoke as a real alternative. The Reel Locking mechanism in Flame is a great tool that could be expanded upon massively and brought into smoke via synched/locked multiple selection in the thumbnail view.

And another - The ability to see an edit as thumbnail view that can be re-arranged so you can group shots per your own liking but still allows drag and drop FX. This would allow another view on an edit that is incredibly powerful for many functions but color correction an obvious one. If you could save these 'views' you could have a fantastic basis for management.

View 2 Replies View Related

Photoshop :: Making Multiple Selections In CS5 Using Magnetic Lasso Tool?

Jul 4, 2013

i am trying to make multiple selections using the magnetic lasso and i cant figure out what im doing wrong. first, i have selecte d the outer perimiter of the object. next, i tried to select the holes within the object for a clean cut out by using the shift key but after i finish my selection and release the shift key my selection doesnt turn into marching ants.

View 1 Replies View Related

CorelDRAW Graphics Suite X6 :: Multiple Selections Export To TIFF

Aug 27, 2013

How to export multiple selections as each selection to export to tiff despite of single tiff.

View 2 Replies View Related

AutoCAD Inventor :: Create Listbox In ILogic That Allows For Multiple Selections?

Oct 3, 2013

How do I create a listbox in iLogic that allows for multiple selections?

View 3 Replies View Related

GIMP :: Pasting Selections Into Other Programs?

Mar 20, 2011

I'm having some trouble pasting selections from GIMP into other programs. If my selection is not rectangular, a black background appears when I paste it that forces it to be a rectangle instead of the shape I actually selected. The program I specifically want to paste into is AutoREALM, but just to test I've tried pasting into MS Paint and MS Word, and the same problem occurs in all of them. Is there anything I can do in GIMP to prevent it from doing this?

View 6 Replies View Related

GIMP :: Moving Selections From A Drawing To Another Page

Nov 8, 2013

I have an existing drawing (A3 size) which loads with a mottled grey background for some reason (looks fine when printed).

I want to select a couple of small rectangles and put them on another page. Perhaps another possibility could be if I could save my selections as separate files (if this were possible) then I could use the "Open as Layers" method which is well described in this forum.

View 1 Replies View Related

GIMP :: How To Make Different (rectangular) Selections On Different Layers

Jan 9, 2012

Can one make different (rectangular or otherwise) selections on different layers?

[e.g. I need to "fade" parts of an image in one layer, and need to "blur" different parts of the same image in a different layer... and want to save the different selections (each for "fade" and "blur" layers) for easier, future edit.]

View 3 Replies View Related

GIMP :: Saving Selections As Separate Files Rapidly?

Feb 26, 2012

I'm scanning old photos from a photo album. There are a lot of these pages, so taking the pictures out and scanning them would be a huge hassle. The photos are too close on most pages for the scanning software to recognize them as separate images and save them as such.

I'd like to save them as individual pictures, both because that's neater and because some require color corrections.

I'd be able to open up the scanned image, select or outline the picture, and have some script save that selection as an individual file. Super ideally the name would be automatically generated, typing in "1" "2" "3" etc gets old, and I obviously don't want to overwrite. And if I could get automatic color correction before saving or in a batch, that would also be great.

View 2 Replies View Related

GIMP :: How To Move Selections Not Whole Images Without Leaving Transparent Pixels

Oct 13, 2012

Whenever I have a selection in an image, I can move it around all I want and wherever I want until I anchor it, but when I open that same image again after saving it and then select a part of the image, I can't get my selection to move. Rather the entire image moves and leaves transparent pixels. How do I move selections and not whole images without leaving transparent pixels?

View 1 Replies View Related

Illustrator :: Outline Hand-drawn Type Made Of Multiple Strokes?

Nov 2, 2013

I designed a logo for some family friends, and the main part of the logo is hand-drawn, and it is made of multiple (a TON) of strokes. The company is getting t-shirts made, and the t-shirt company contacted me to get a "vector file with the fonts outlined." I know quite well how to do this on actual fonts, but how to outline a series of strokes.

View 5 Replies View Related

GIMP :: Uploading With Already Made GIF

May 2, 2012

I created a gif with gimp gap. I saved it. I checked it on quick time, it plays. But when I tried to load it on tumblr it wouldnt load. Its not over the mg limit. Itll load but not play animation {?}

View 5 Replies View Related

Illustrator :: Using Scissors Tool On Every Anchor With Ease?

Nov 19, 2012

I wonder if there's an easy way to have the result just as if I used scissors tool on every anchor of a path. Clicking on every anchor is a tiresome labor.

View 4 Replies View Related

Photoshop :: Filling Selections With Selections

Oct 26, 2007

I am trying to fill a selection in one picture with a selection from another picture. I am having problems scaling the selection to fit exactly. i still have an outline from the other (previous) selection.

I opened both images up side by side, Adjusted the view on both to 33%, made my first selection, hit control + c, made my selection on the other picture (Exact same shape), hit control + v + shift, then edit>transform>scale, then shift+drag.

Can't get it to line up. I also tried layering the two images then reducing the opacity of just the selection, but photoshop reduces the opacity of the entire layer instead of just the selection,

View 2 Replies View Related

GIMP :: Export XCF That Made Back To PNG?

Jan 11, 2014

I tried to export the .xcf that i made back to a .png but it says there is an error. Im using os x 10.9.1

View 5 Replies View Related

GIMP :: How To Put Already Made Logo Into Photos

Jun 2, 2012

I already have a logo made. Its a jpeg file. how to put it onto my photos.

View 16 Replies View Related

GIMP :: Image Made From Text

Jul 10, 2013

I am trying to make an image from using words- I have an image and I want to make it using just words.....so it's an image of an object but made with words (think of a photo mosaic, but with words.) I am not sure how to do this. I searched online, but all I was able to find were tutes on adding text to an image. What I want is the image to be made out of text.

View 5 Replies View Related

AutoCAD 2013 :: Are Intelligent Objects Only Used In Revit

Mar 17, 2013

I am just getting back to autocad after using vectorworks for a few years.  In vectorworks I was creating smart walls and plugging in windows, doors ect.

Are intelligent objects only used in Revit? Are people still offsetting wall lines and creating their own windows and doors and cutting out openings in Autocad theses days?

View 2 Replies View Related

GIMP :: 2.8 - Adding A Cursor Made In Form Of Circle

Nov 13, 2012

I want to add a cursor that I have made to my GIMP program. I have made one in the form of a circle. I have changed the extension to .cur, but what folder it needs to go in when I use the "Associate File Extension" facility in Windows 7.

View 1 Replies View Related

AutoCAD Inventor :: Creating Intelligent Sketched Symbols

Feb 1, 2012

I am currently working on creating new symbols. Now I want to keep the look of the symbol (see attached) but I want all the text to be automated as the text is currently "prompted entry".

Now when I go into the edit the text within the symbol sketch, I need the "view label properties" from the drop down menu but its not there! Is there a way that I can get the "view label properties" into the drop down menu??? What I am after is to attach this symbol to a view and the symbol will automatically show the name of the view and the scale.

OR........ If there is any way that I can get default view label to look like my symbol?

View 9 Replies View Related

Photoshop :: Can Artwork Made With CC Line And Box Tools Be Made Into Vector Image

Jan 15, 2013

I have created city/landscape artwork using photoshop line and box tools. If you go to URL...  then click on the link that says (click here to view Gotham City) you will see one of the images I am talking about.  Can this image be made to look the same in vector.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved