My AutoCAD Map 2014 still allows me to select objects and then type the command to, for example, delete the items. I was able to do it in my Civil3d but it seems something was toggled so that I'm no longer able to. Now if I select items, once I select a command, it essentially unselects the objects or doesn't recognize that they are selected.
View 2 Replies
Since upgrading to AutoCAD Architecture 2013 I've noticed that the sequence in which I type my commands no long works. I used to be able to highlight various items and then type in the command I want to apply to these items - i.e. Mirror, Erase, Scale, etc. But now with 2013 I will select the items, then type in the command, and the it asks me to again select the items I wish to apply the command to. What settings I need to change in order to fix this?
View 1 Replies View RelatedI am having a problem with a delay in selecting an object and selecting a command.
When I select an object the pointer has at least a 3 second delay before it starts moving around normally again. It is the same with selecting a command. This has started to get tedious. It has worked fine in the past so I don't think it is a RAM/graphics card problem.
I've just encountered strange issue and I cannot find the proper solution anywhere.I work in AutoCAD for 5 years and I am used to type commands on the keyboard (I usualy don't use icons in AutoCAD).
I was used to...just cancel all previous commands by ESC key and start typing the command.But since last week I had to click in the command line to write the command in it. How to type commands without annoying clicking in command line?
I distinctly remember back in the day, (~2006), that you would be able to to choose the items you wanted to hatch first, then enter the Hatch command, hit OK, and your objects would be hatched. Simple! Since 2010, you have to enter the Hatch command, then hit Select Objects, then select your objects, then hit Enter, then hit OK, which I find it is less efficient.
View 6 Replies View RelatedI am currently running into the problem where i will select 1 item by simply clicking on it, and when i go to select a second item, the first is then deselected. I can click and drag and select multiple items that way, but that doesn't work when the items and on different sides of the drawing and there are other lines and what not in between them.
I am also aware that i can hold shift and select the second item, and all is fine, but that is not my desired operation. I have been working with Autocad for almost a year under the notion that i can just select multiple items by clicking on them all individually and would love to have this operation reinstated, primarily for ease and convenience, which increases productivity.
Is it possible, via whatever methods (lisp?) to be able to have a premade block with an attribute and insert it into a drawing then assign a value to it by selecting another existing block in the drawing and using one of its own attribute’s values?
For example, say I have a block representing a telephone and it had an attribute called "PhoneNo" and I inserted it into a drawing showing an office floor plan that had blocks in each office space that are telephone junction boxes with attributes "PhoneExtension". I would like to be able to autocomplete the entering of the “PhoneNo” data by selecting one of the telephone junction boxes in the drawing and using its attribute’s value.
I used to select several items at once by clicking them and now it does not unless I hold the shift key .
View 3 Replies View RelatedRecently I have started having this annoying problem where I select something and it shows it is selected by the grip but in reality it hasn't selected it as can be seen in the properties box.
Cancelling the selection with the ESC key doesn't work
regen doesnt' work
regenall doesn't work
audit doesn't find anything
Qsave does work but I would prefer not to use it due to sharing drawing xrefs with others means that they constantly have to keep reloading the xrefs
Have tried reinstalling autocad but that doesn't make it work.
Currently have a NVIDIA Quadrow 3500 which is probably not the correct one.
things with Ps, but I can't seem to figger out how to make selections out of scanned drawings.. like a selection of hair or arms...
View 5 Replies View RelatedRecently installed AutoCAD 2014, and I'm currently trying to type the text:
TC1: 2/90 x 35 MGP10 studs with 4/2.8mm dia nails each end
It keeps stacking the 2/90 into the fraction 2 over 90. How can I turn auto-stacking off? I know I managed to turn it off for AutoCAD 2012, but now I can't find the option or system variable.
how to select items on the canvas, aside for selecting each individual layer on the layers panel. have Mac os X 10.7.4, and I previously had cs5.5 on my laptop.
I was able to use the direct select tool to select mulitple items by either dragging it would select anything in the box or using shift to select multiple items. Do I have to click on every item in the layer panel to select it on the canvas? Is there a option that I have checked when it should be unchecked?
The key input that triggers the command that lets you select layout (.dwt?) files at the beginning before AutoCAD fully boots up?
View 2 Replies View RelatedBack in Acad2002 when I selected a command (line, for example) the crosshairs would lose the pickbox around them and I could precisely pick the area I want with no obstruction. I see in 2012, that following those same steps, leaves the pickbox around the crosshairs and thus makes it obtrusive to precisely pick exactly what I want. Is there a system variable to make that pickbox disappear while I am making my selection?
View 4 Replies View RelatedAfter installing the VBA Module, I get the message "Unknown command "VBARUN"". I've rebooted, restarted and tried reinstalling the VBA Module to no avail.
View 4 Replies View RelatedI press CTRL+9 to make the Command Line disappear while drawing. When I plot (or when doing a plot preview) , the Command Line appears again by itself. So I always have to turn the Command Line off manually after each plot
The bug still happens;
- if Dynamic Input is turned off or on
- if I plot to a real device or in PDF
- if the Cammand Line Palette i docked or floating.
This is not an issue in AutoCAD 2012 so I guess it has to do with the new way they programmed the revamped Command Line palette in 2013.
Using Windows7
Is there any way that Autocad can have multiple items placed on the clipboard for insertion use like the Microsoft Office Word program has (up to 24 inputs). This would be a good feature to allow going to one file, copying what you need and then switching to your current drawing file and placing them as needed.
View 2 Replies View RelatedHow to trim an array? I want to trim out array items as if using a crossing window, not as the trim command does. See attachments. I want to be able to trim as in array 2, not as array 1.
View 9 Replies View RelatedI've recently installed AutoCAD 2014 and am working to get it compatible with my company's internet standards.
There are some features that are not cool with our IT & Security to have enabled in our office.
I'd like to remove these 3 items from the upper right menu. (see attached image).
The items are...
Sign In to Autodesk 360
Autodesk Exchange Apps
Stay Connected
I'm wanting to copy some elements from one drawing to a different .dwg file to make sure it's identical. I can't just simply use the COPY command. At least it didn't work for me.
View 8 Replies View RelatedI don't know about others having drawing that either have DGN trash like linetypes or (Cells) blocks that seem to not purge out even if you use the regular wblock command.
And if you go to purge and toggle "View items you cannot purge" you see them.
You want to clean the drawing and you want to keep all your paperspace tabs so you will end up with a clean drawing.
1) use the command -wblock
2) enter a new name
3) enter * (that will tell Autocad to create a new drawing with everything in it)
4) close the old drawing don't save and open your new clean drawing with all your paperspace tabs, your done!
Starting a few weeks ago Photoshop CS6 crashes every time when selecting the print command with the error : "Adobe Photoshop CS6 has stopped working" This happens using different printers and when printing anything, including a blank page. Printing works fine from other applications.
Running Photoshop CS6 v.13.1.2 x32 on Windows 7 Professional 64bit
This is a Dell Optiplex 990, I7 3.4GHz, 4GB RAM, 250GB HDD system, AMD ATI RADEON HD 6350 PCIe Video Card on a 16x bus
1) Photoshop has been updated
2) OS has been updated
3) Video drivers have been updated with new ones from the manufacturer
4) I tried new drivers for our Kyocera TaskAlfa 3550ci
5) I tried new drivers for our Kyocera FS-3140MFP
6) I also tried removing all of the printers except "Adobe PDF" printer
Here is an example event from the Windows Application Log after photoshop crashed.
Faulting application name: Photoshop.exe, version: 13.1.2.0, time stamp: 0x50e86403
Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec49b60
Exception code: 0xc0000374
Fault offset: 0x000c380b
Faulting process id: 0xa0c
Faulting application start time: 0x01ce355706f614ca
Faulting application path: C:Program FilesAdobeAdobe Photoshop CS6Photoshop.exe
[code]....
I need to quickly obtain a count of all entities on a layer, or preferably multiple layers. In this instance all the entities will be hatches so that should make it a bit easier.
I'm aware I can use quickselect but if there was a routine that would select all hatch entities on screen (multiple layers) and provide a count per layer that would be much quicker.
In Autocad 2013, Is it possible to erase somme items of a rectangular associative array. I have seen that we can replace an object with a different one.
View 8 Replies View RelatedHow do I select multiple items without having to hold down the shift key in ACLT 2013? I didn't have this problem in 2010.
View 3 Replies View RelatedWhether I used the flyout on the ribbon, the CTRL+1 command, or right click on properties in the menu of a selected item, the properties window does not appear. I tried both repairing and reinstalling AutoCAD and neither worked for me.
View 9 Replies View Relatedi having a fully working ribbon in ACAD2013. it is a registered dll that is originally coded in vb.net.
unfortunatley the functionality is only visible at the drafting & annotation workspace but is desperatly needed in classic workspace mode.
for hours i am trying to find a way to make my functionality working in classic workspace too.
is it possible to extend the classic workspace in acad2013 with my functions? if so, how, or where can i get more detailed information to solve my task.
I am hoping to link text items between pages and items in the drawing such as elevations?
So, ideally, I would have a front page to my drawing set, and this would have a 'Contents' type table on it, with the title name of each drawing in one column, then the drawing number in the next column. This is the tricky bit, someone must know: If i was to change the name / number of any item in this table, could it change also (linked to) the following items:
Drawing title (as a text idem on the layout sheet that that drawing relates to)
Drawing number (as a text idem on the layout sheet that that drawing relates to)
Elevation call-out (on the plan view)
And possibly:
Excel reference cell
Drawing layout tab title (this might be pushing it!!)
Perhaps this could be done by linking to an external Excel spreadsheet with these titles modified in there? I'm not sure. This would be ideal as typing into excel is a lot easier than the triple click text modify method required currently.
I waste a lot of time renaming and updating sheet names / titles / numbers. Are there standard templates for drawing sets that may have this built in available anywhere that I could try?
I just installed Acad v. 2014. I opened up an existing file, went to select a line, but noticed that the line does not highlight when I hover over it like my last version. How do I change the settings so that when I hover over an object, whether it be a line or a cross hatched area, it will highlight that object so I know the length or area of the object?
View 4 Replies View RelatedSelecting the hatch by clicking it, It happens very often that we fail to select the hatch by clicking it.
How to ensure selecting that hatch by clicking it? Why the hatch is failed to be selected by clicking it?
I am missing entities when I try to pick on them.Not window, not crossing. Just trying to pick an entity. I usually select entities first before my command.
Is there a variable that might have changed? I played with PICKBOX & APERTURE but this doesn't change anything when I try to select something. I can have the entity in the box right next to the intersection of the crosshairs and instead of selecting the entity it starts to window.
I have a logitech m705 mouse w/ setpoint software ver 6.32.7 & driver ver 5.33.14 installed.
