AutoCAD 2010 :: Selecting Several Items At Once By Clicking
Mar 4, 2013I used to select several items at once by clicking them and now it does not unless I hold the shift key .
View 3 Replies
ADVERTISEMENT
AutoCAD 2010 :: Selecting Items Not Working Properly
Sep 21, 2012Recently I have started having this annoying problem where I select something and it shows it is selected by the grip but in reality it hasn't selected it as can be seen in the properties box.
Cancelling the selection with the ESC key doesn't work
regen doesnt' work
regenall doesn't work
audit doesn't find anything
Qsave does work but I would prefer not to use it due to sharing drawing xrefs with others means that they constantly have to keep reloading the xrefs
Have tried reinstalling autocad but that doesn't make it work.
Currently have a NVIDIA Quadrow 3500 which is probably not the correct one.
AutoCAD 2013 :: Selecting Hatch By Clicking It
Apr 4, 2013Selecting the hatch by clicking it, It happens very often that we fail to select the hatch by clicking it.
How to ensure selecting that hatch by clicking it? Why the hatch is failed to be selected by clicking it?
AutoCad :: Selecting Second Items Causes First To Deselect
Jul 13, 2012I am currently running into the problem where i will select 1 item by simply clicking on it, and when i go to select a second item, the first is then deselected. I can click and drag and select multiple items that way, but that doesn't work when the items and on different sides of the drawing and there are other lines and what not in between them.
I am also aware that i can hold shift and select the second item, and all is fine, but that is not my desired operation. I have been working with Autocad for almost a year under the notion that i can just select multiple items by clicking on them all individually and would love to have this operation reinstated, primarily for ease and convenience, which increases productivity.
AutoCAD :: Can No Long Type In Command After Selecting Items
Jul 17, 2012Since upgrading to AutoCAD Architecture 2013 I've noticed that the sequence in which I type my commands no long works. I used to be able to highlight various items and then type in the command I want to apply to these items - i.e. Mirror, Erase, Scale, etc. But now with 2013 I will select the items, then type in the command, and the it asks me to again select the items I wish to apply the command to. What settings I need to change in order to fix this?
View 1 Replies View RelatedAutoCAD 2013 :: Selecting Items And Then Entering Command
Dec 20, 2013My AutoCAD Map 2014 still allows me to select objects and then type the command to, for example, delete the items. I was able to do it in my Civil3d but it seems something was toggled so that I'm no longer able to. Now if I select items, once I select a command, it essentially unselects the objects or doesn't recognize that they are selected.
View 2 Replies View RelatedPhotoshop :: Selecting Complicated Items
Apr 29, 2004things with Ps, but I can't seem to figger out how to make selections out of scanned drawings.. like a selection of hair or arms...
View 5 Replies View RelatedPhotoshop :: How To Select Items On Canvas - Aside For Selecting Each Individual On Layers Panel
Aug 27, 2012 how to select items on the canvas, aside for selecting each individual layer on the layers panel. have Mac os X 10.7.4, and I previously had cs5.5 on my laptop.
I was able to use the direct select tool to select mulitple items by either dragging it would select anything in the box or using shift to select multiple items. Do I have to click on every item in the layer panel to select it on the canvas? Is there a option that I have checked when it should be unchecked?
AutoCAD 2010 :: Edit Dim By Right Clicking
Nov 30, 2012i cannot edit the dimension by right clicking it.. the dim text position, precision, dim style and flip arrow is missing.. im using cad2010..
View 3 Replies View RelatedAutoCAD 2010 :: Clicking On A .dwg On A Website Won't Open
Feb 1, 2012When I click on a .dwg on a website, AutoCAD will not open the document and IE just loads a blank page. My default program for .dwg is set to AutoCAD DWG Launcher. This works on other PCs.
The only way to open the .dwg is to right-click the link, select Save-As, then double-click the file once it is saved on my PC.
How can I fix this?
Photoshop :: Difference Between Selecting Your Layer And Clicking Add Layer Mask
Apr 6, 2008Is there a difference between selecting your layer and clicking Add Layer Mask Icon versus having that layer selected, hold down ctrl and select Add Layer Mask Icon?
Also regarding working in Lightroom, if I modify a jpeg, select another image from filmstrip to work on and then go back to the first image for more work, are those actions degrading image even though I never physically save and close.
AutoCAD 2010 :: Random Commands When Fast Mouse Clicking
Apr 11, 2011We've upgraded to 2012 and have noticed a problem when fast clicking on the mouse when using commands.
For example when using the erase command I would usually type E and then quickly right click and left click. However in 2012 it brings up random command instead of erase i.e. sheetset, publish, ucs etc..Bringing up the text window afterwards it shows
Command: e
ERASE
Select objects: Specify opposite corner: *Cancel*
0 found
Select objects: *Cancel*
Command: _PointCloudIndex
The right click and left click are only processed once.This happens on all commands typed on the command line not just erase
AutoCAD 2010 :: Double Clicking In Viewport Zooms To Extents
Feb 19, 2013I have a problem with some drawings. When double clicking in a viewport that is unlocked (for the purpose of panning) the viewport zooms to extents.
View 6 Replies View RelatedAutoCAD 2010 :: Duplicate Items On Menu Bar
Jul 13, 2013My menu bar has duplicates of some items such as "edit", "view", etc. How can I access it to remove these duplicates?
View 6 Replies View RelatedAutoCAD 2010 :: How To Add Items To Existing Attribute
Feb 3, 2012I have an exisitng attribute that have several line items. I want to add more items to this attribute same attribute. The attribute block name is "JLR24X36" and there are 15 existing tags within this attribute?
View 3 Replies View RelatedAutoCAD 2010 :: Relocating Menu Items?
Jun 4, 2012I am updating a user to ACADM 2010 from R14. His actual R14 menu was customized so that the menu bar shows 'File' 'Drawings', 'Options', 'Edit', 'View', etc. from left to right. So far I have been able to get the 'Drawings' and 'Options' added to the classic 2010 menu.
However, the 'Drawings' and 'Options' show clear the right of 'Help' (see attachment). I need to get them moved over to a position between 'File' and 'Edit'.
These are drop downs with 5 to 6 levels. Having them on the right makes them look very messy because the cross back and forth.
AutoCAD 2010 :: Items From Tool Palette Disappearing?
May 15, 2012I have a section cut that I use from my tool palette that disappears from paperspace. It shows up in model space and everything else I use from my tool palette shows in both model and paperspace. I have all layers on, unfrozen, etc. They are not on my defpoints layer either. It just seems to be that particular block that is disappearing. Its the strangest thing. One day it worked just fine and the next it started doing this.
View 5 Replies View RelatedAutoCAD 2010 :: Do Solid / Subtract With Array Items
Sep 27, 2011If you have a housing with say, 12 cylinders in the flange which are to be cut out of the housing to become the 12 bolt-holes. If you positioned your cylinders using polar array, are you supposed to be able to use the command solid/substract? I can't as it won't pick the array parts to cut. I had to resort to rotating/copy all the cylinders around the flange and then it works great. Any way to do holes through a solid...
View 9 Replies View RelatedAutoCAD 2010 :: Reselect All Selected Items By Typing P And Then Enter
Jan 30, 2012in the old autocad that i had for PC there was a command to re-select all selected items by typing P and then enter. I now have 2011 autocad for mac and can not figure out how to do the same thing.
View 3 Replies View RelatedAutoCAD 2010 :: Plot Only Certain Items In Color Without Changing Everything Else To Black?
Oct 7, 2010I am doing some engineering drawings in ACAD 2011. I use multiple colors on-screen to discern between certain items, then plot everything in black, like I'm sure almost everyone out there does. However, I would like to print only lines of a certain layer in differing colors. Is there a way to have that one layer print in a different color besides black, yet still use multiple colors on-screen?
View 6 Replies View RelatedAutoCAD 2010 :: Quick / Easy Way To Number Items In A Drawing?
Oct 12, 2012Is there a quick and easy way to number items in a drawing? I have attached a pdf and would like to number the seats 1-100.
View 1 Replies View RelatedAutoCAD 2010 :: Copy Multileader Items - Leaders Do Not Show Up
Jun 24, 2013When we copy multileadered items from one viewport to another the leaders do not show up, but the text does.
View 3 Replies View RelatedAutoCAD 2010 :: Recovering Purged Items After Importing To New Template Sheet?
Mar 28, 2012Needed to purge items in a drawing to recover a drawing in order to repair corruption within it it. I purged and audited the drawing in question and then created a block or the drawing elements which I imported to a new drawing sheet. That's great, all is well but.....obviously (now) the only layers, dimscale,etc. items I normally use in my template sheet are gone and only the items remaining after the purge are the ones that were in my original drawing.
How can I, or can I replace my normal full layer list, dim settings, blocks, etc?
AutoCAD Dynamic Blocks :: Link Text Items Between Pages And Items In Drawing?
Apr 17, 2013I am hoping to link text items between pages and items in the drawing such as elevations?
So, ideally, I would have a front page to my drawing set, and this would have a 'Contents' type table on it, with the title name of each drawing in one column, then the drawing number in the next column. This is the tricky bit, someone must know: If i was to change the name / number of any item in this table, could it change also (linked to) the following items:
Drawing title (as a text idem on the layout sheet that that drawing relates to)
Drawing number (as a text idem on the layout sheet that that drawing relates to)
Elevation call-out (on the plan view)
And possibly:
Excel reference cell
Drawing layout tab title (this might be pushing it!!)
Perhaps this could be done by linking to an external Excel spreadsheet with these titles modified in there? I'm not sure. This would be ideal as typing into excel is a lot easier than the triple click text modify method required currently.
I waste a lot of time renaming and updating sheet names / titles / numbers. Are there standard templates for drawing sets that may have this built in available anywhere that I could try?
AutoCAD 2010 :: Set UCS Angle By Selecting Two Points
Apr 12, 2013In previous version you can rotate the UCS around the Z axis by tying UCS Z at the command prompt and then you were prompted to select two points to defin the angle. Now it uses a point at the ucs icon as the first point and only allows me to pick the second point. Is there a way to pick two points to define the UCS angle? I tried setting the UCS Origin to the first point and that did not work.
Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600
AutoCAD 2010 :: Selecting Object To Move?
Feb 15, 2012I am using autocad 2012 new.. i hav problem with MOVE!
i am selecting an object to move but rather than moving it alone its moving like stretch!
AutoCAD 2010 :: Selecting An Object Or A Portion Of Dwg
Jan 26, 2013Virtually all coordinate entry as well as many other tools and operations reference the current UCS. 2D tools.
Absolute and relative coordinate entry Absolute reference angles Definition of horizontal and vertical for Ortho mode, polar tracking, object snap tracking, grid display,and grid snap Orientation of horizontal and vertical dimensions Orientation of text objects View rotation using the PLAN command
Moving or rotating the UCS can make it easier to work on particular areas of a drawing. However when selecting an object or a portion of the dwg. crossing - window , (a good exemple is stretching) the selection of the area is still 'rectangular' from the ortho of 0° or 90°. This cross-window selection should follow the direction of the ortho angle selected. Is there a command or a setting in order for this operation to take place? IF NOT for future autoCad releases or a update for current releases should be reviewed and implemented
AutoCAD 2010 :: Selecting Vertical Dimensions
Oct 24, 2012Im trying to find a way to select just the vertical dimensions. Quick select doesn't work because it selects every dimension.
View 2 Replies View RelatedAutoCAD 2010 :: Selecting Successive Objects
Jul 25, 2013Suddenly, when I select objects, the existing selected objects deselect. If this is a setting I inadvertently misused I don't know why the setting exists. How I can get back to selecting successive objects?
View 2 Replies View RelatedAutoCAD 2010 :: 2012 Publish Freeze By Clicking On Publish Options?
Oct 12, 2012when I trying to publish in single-sheet file. so I type publish on my command bar, then I chose publish to pdf but when i try to click on publish options to set the location where I need to put the pdf files the publish window freeze. same thing when i click on add sheet button.
NOTE: I have this problem especialy when I used AUtoCAD from home. to use AutoCAD from home I made borrow licence.
AutoCAD 2010 :: 2012 Freezing Up When Selecting Hatch Patterns?
Jul 8, 2011I just upgraded from Autocad LT to Autocad 2012 (full version). When I go to select a hatch pattern by left clicking on it the program locks up. Then I have to "force-close" Autocad 2012 and loose some of my work. It has done this in several diferent drawings. Autocad LT does not have this problem.
I have a HP Z workstation with 6 gigs of ram and an Intel I-5 processor (very fast machine) with a quadro fx 380 grahics card.
I tried reinstalling Autocad 2012 and that didn't work. Not sure what to do.