AutoCAD 2010 :: Selecting Items Not Working Properly
Sep 21, 2012
Recently I have started having this annoying problem where I select something and it shows it is selected by the grip but in reality it hasn't selected it as can be seen in the properties box.
Cancelling the selection with the ESC key doesn't work
regen doesnt' work
regenall doesn't work
audit doesn't find anything
Qsave does work but I would prefer not to use it due to sharing drawing xrefs with others means that they constantly have to keep reloading the xrefs
Have tried reinstalling autocad but that doesn't make it work.
Currently have a NVIDIA Quadrow 3500 which is probably not the correct one.
I am currently using AutoCAD 2012 and having problems with the STRETCH command.When I select 3 lines, then deselect 1 of them lines and then select the STRETCH command it does not stretch the selected lines.
Now this is the way I have done in it in previous versions and it has worked. (AutoCAD 2010). Our Company has recently moved to 2012.Is this a function that has been removed with this version or am I doing something wrong?
On ACAD versions higher than 2005 the STRETCH command does not work properly. The problem happens when selecting the items from the left to right. The item is MOVED instead of STRETCHED. It works normally when selecting item from Right to Left. However I need it to work from Left to Right so that I can individually select the item that I want to stretch. Because of this, I am still using 2005. Both 2009 and 2012 have this BUG, making them un-usable for my applications. I just got a new computer with 2012 version only, but I can't use it. I am trying to get 2005 installed on it now.
I am currently running into the problem where i will select 1 item by simply clicking on it, and when i go to select a second item, the first is then deselected. I can click and drag and select multiple items that way, but that doesn't work when the items and on different sides of the drawing and there are other lines and what not in between them.
I am also aware that i can hold shift and select the second item, and all is fine, but that is not my desired operation. I have been working with Autocad for almost a year under the notion that i can just select multiple items by clicking on them all individually and would love to have this operation reinstated, primarily for ease and convenience, which increases productivity.
Since upgrading to AutoCAD Architecture 2013 I've noticed that the sequence in which I type my commands no long works. I used to be able to highlight various items and then type in the command I want to apply to these items - i.e. Mirror, Erase, Scale, etc. But now with 2013 I will select the items, then type in the command, and the it asks me to again select the items I wish to apply the command to. What settings I need to change in order to fix this?
My AutoCAD Map 2014 still allows me to select objects and then type the command to, for example, delete the items. I was able to do it in my Civil3d but it seems something was toggled so that I'm no longer able to. Now if I select items, once I select a command, it essentially unselects the objects or doesn't recognize that they are selected.
how to select items on the canvas, aside for selecting each individual layer on the layers panel. have Mac os X 10.7.4, and I previously had cs5.5 on my laptop.
I was able to use the direct select tool to select mulitple items by either dragging it would select anything in the box or using shift to select multiple items. Do I have to click on every item in the layer panel to select it on the canvas? Is there a option that I have checked when it should be unchecked?
If I have elements on separate levels and I use the colour range option to select the area, it works on all the levels, not just the level I have selected. That's not what I want! I only want it to select the colour range on that one level. The work around is to manually turn off other levels, but on a file with lots of levels, that can be tedious. Can this be avoided? Incidentally, magic wand works only on the selected level, but not colour range (or color range, if you are American).
My right click sudenly doesnt open shortcut-menu? I went to options and right click customization and everythings fine there. Didnt touch anything at all!
I am using Inventor 2009 professional and I have to run a stress analysis on a beam. I put the constraints and the forces I need and when I hit the calculate button, the results so up, but when I click on the results, nothing appears. I need to run this calculation and do not want to resort to hand calculations.
I am having problems with quick select not working properly in 2013 when I am cleaning up X-Refs selecting hatcing or anything else it does not just delete what I am tring to select it just deletes everything. If I go back to any prevous version of AutoCAD it works fine the only solution i can think of is to reinstall.
I'm having problems with the crop feature in an Inventor idw. Having cropped my view I then go into the browser to edit the crop (edit sketch), the lines on the crop window will not move and I am unable to edit the selection, why is this not working ? Occasionaly I can move / resize one or two of the crop boundry lines but never all of them.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition Windows 7 HP Z400, Intel Xeon W3550 3.07GHz 12.0GB RAM, ATI FirePro V4800 (FireGL)
I use Autodesk Architecture and Civil 3D. I usually print projects sheets that contain both civil and architecture form Architecture, but occassionly print sheet sets through civil 3d.
Recently, I have had a problem with one hatch pattern available to Architecture but not civil 3d not printing properly through c3d. I added a support file search path to my c3d to point to location of architectural hatches, but the problem did not go away.
I have an assignment in school in which we are going to calculate the number of needed rivets and their dimensions to join two pieces of aluminum with the dimensions 5x50x200mm together.
I've created the sheet metal and imported two of them into an assembly along with 8 rivets from the content center with the appropiete dimensions. In comes my problem. I planned on running a stress analysis and pasting the pictures of the results in my report. However, I have a feeling that the stress analysis tool isn't working as it should.
No matter what force I'm applying to the sheet metals, and no matter what material I assign to the different parts, including the rivets, the results, the deformation and force applied to the rivets, are roughly the same.
I've applied a force of 12700N to the two short sides of the sheet metals:
The two sheet metals are also fixed on the opposite side of the forces:
I'm having trouble viewing a list within Toolspace Item View. When I click the item in the tree nothing shows up in the item view. There should be a list of all my parcels but there is not. Graphical view works fine. List view works fine with other items in my tree except for my parcels. Also, when i right click parcels and click refresh I can see the list genereate in item view but then it quickly disappears.
When I paste an item in the assembly, the item is thrown off in space. It places it so far away that it is not even in the view window. I have to stop what I doing, do a find in window and then drag it close to where I need it. Then I can start constraining it.
Why does it not place the item at my coursor location like it used to?
I have this simple dynamic block that is to change from 4" to 6" to 8" square. I have a linear parameter, 0 grips, and a Lookup function for 4, 6 or 8. It is supposed to scale about the midpoint (insertion point). I have tried both the Midpoint and Startpoint settings for Base Location but it always seems to scale from the far left of the Linear Parameter.
I have been using the frame generator quite often and recently the insert frame command is not working properly. I would like to know if there is a fix/patch for this problem or do I have to re-install the program? I am very frustrated with this problem as I do alot of structural design and the insert frame command comes in very very handy.
"make components" has worked flawlessly for a few years until today.
I have a part with 47 individual solid bodies. When I select all the bodies and hit the "make components" tool about 2/3 of the bodies deselect and are not included in the list to be sent out to parts. While in the command, I cannot select them in any way. However, I can open one of the derived parts that are created and edit to select one of the bodies that refused to work in the make components command. While this is a workaround im not looking forward to doing this to 30+ parts.
I have an exisitng attribute that have several line items. I want to add more items to this attribute same attribute. The attribute block name is "JLR24X36" and there are 15 existing tags within this attribute?
I am updating a user to ACADM 2010 from R14. His actual R14 menu was customized so that the menu bar shows 'File' 'Drawings', 'Options', 'Edit', 'View', etc. from left to right. So far I have been able to get the 'Drawings' and 'Options' added to the classic 2010 menu.
However, the 'Drawings' and 'Options' show clear the right of 'Help' (see attachment). I need to get them moved over to a position between 'File' and 'Edit'.
These are drop downs with 5 to 6 levels. Having them on the right makes them look very messy because the cross back and forth.
When I create a new sketch on any given view and utilize the 'Project Geometry' command, not all geometry will project onto the sketch. It seems random; I've tried multiple times using different orders in which to choose the geometry. Sometimes certain geometry will project, sometimes not.
I have a section cut that I use from my tool palette that disappears from paperspace. It shows up in model space and everything else I use from my tool palette shows in both model and paperspace. I have all layers on, unfrozen, etc. They are not on my defpoints layer either. It just seems to be that particular block that is disappearing. Its the strangest thing. One day it worked just fine and the next it started doing this.
If you have a housing with say, 12 cylinders in the flange which are to be cut out of the housing to become the 12 bolt-holes. If you positioned your cylinders using polar array, are you supposed to be able to use the command solid/substract? I can't as it won't pick the array parts to cut. I had to resort to rotating/copy all the cylinders around the flange and then it works great. Any way to do holes through a solid...
In the process of releasing 2013 to the office. We have about 60 machines being loaded, varying from 64-bit Win 7, 32-bit Win 7 and 32-bit Win XP. I have gone through and created new PC3 files for our two KIP printers (3000 & 7000 series). I added one custom page size to each to create a PMP that goes along with them. These files have been placed onto a network folder for all users to access. This is where my confusion begins.
When other users go to utilize these files it is giving an error stating that "the plotter configuration cannot be found, driver cannot be found, device cannot be found, yada yada. The none has been substituted."
So we began to look at the PC3 files and see what the issues are. When the same file on the Server is copied down to a local machine it changes back to a KIP10 driver down from a KIP11 driver on the network. Make Sense?
In order to fix I began running the "Add-A-Plotter Wizard" on the local machine. Created a new PC3 wiih a different name and went back into the program. Now the PC3's that did not work before WORK.
In short, since the 2013 version has a new file format do we have to run the "Add-A-Plotter Wizard" on all local machines before the standard PC3 file will work effectively? Or does having 2011 version still on the machines have an effect on these files?
Win 7 Pro 64-Bit - Dell T1600 Intel Xeon 3.30Ghz 8Gb RAM Civil 3D 2013
I just started having an issues with the delete feature. When I click on an object and it highlights it--when i hit the delete button, it doesn't delete the object any more. Also i should be able to click on as many object as i want, now it makes me hold the shift key down. And also when I click on an object then pull the layers tab down to assign it to a diffent layer ---it won't change it now.. what do you think is going on with the software and who might I contact to get this problem corrected.