I am currently using AutoCAD 2012 and having problems with the STRETCH command.When I select 3 lines, then deselect 1 of them lines and then select the STRETCH command it does not stretch the selected lines.
Now this is the way I have done in it in previous versions and it has worked. (AutoCAD 2010). Our Company has recently moved to 2012.Is this a function that has been removed with this version or am I doing something wrong?
On ACAD versions higher than 2005 the STRETCH command does not work properly. The problem happens when selecting the items from the left to right. The item is MOVED instead of STRETCHED. It works normally when selecting item from Right to Left. However I need it to work from Left to Right so that I can individually select the item that I want to stretch. Because of this, I am still using 2005. Both 2009 and 2012 have this BUG, making them un-usable for my applications. I just got a new computer with 2012 version only, but I can't use it. I am trying to get 2005 installed on it now.
View 5 Replies View RelatedI have been using the frame generator quite often and recently the insert frame command is not working properly. I would like to know if there is a fix/patch for this problem or do I have to re-install the program? I am very frustrated with this problem as I do alot of structural design and the insert frame command comes in very very handy.
View 6 Replies View RelatedRecently I have started having this annoying problem where I select something and it shows it is selected by the grip but in reality it hasn't selected it as can be seen in the properties box.
Cancelling the selection with the ESC key doesn't work
regen doesnt' work
regenall doesn't work
audit doesn't find anything
Qsave does work but I would prefer not to use it due to sharing drawing xrefs with others means that they constantly have to keep reloading the xrefs
Have tried reinstalling autocad but that doesn't make it work.
Currently have a NVIDIA Quadrow 3500 which is probably not the correct one.
I have been using the MVSetup command to adjust a view port orientation however when I do this the Pickfirst command is changed to 0 - it was only by chance I discovered this and was able to change it back. Also, is there a command to reset all changes made through MVSetup in a viewport ?
View 9 Replies View Related When i type O for offset Command its not working its shows following error, i have attached the screen sort.
then i write full command "Offset" its working, like this many shortcut command are not working (Array, Reactangle, Fillet etc.)
I am running autocad 2012 and my block edit command is not working. im getting the following response:
View 2 Replies View RelatedThe layer merge command is not working in one particular drawing. But fine in others and new files using the acad.dwt file.Is there a setting that effects the command.
View 6 Replies View RelatedI'm using autocad2010. The command( Paste with original coordinates ) is not working.
The application(autocad-2010) uninstall and then reinstalled the error is continued.
Is there a way to use the stretch command like this?First I select the object. type stretch, when i make my selection window the stretch points of only that object get selected and not of other polylines which are inside my selection box.
View 4 Replies View RelatedMany many times have i used the stretch command without any dramas. I now have a new PC with AUTOCAD 2010. Since the upgrade my stretch command seems to act differently.
If i go to stretch a polyline with some sort of arc joined. no part of the arc inside the window will move.
Please see the picture atatched for better detail.
Stretch.jpg
Why does it now stretch in this manner?
Whenever I use the move command on a line or series of lines that are touching other lines, the lines that aren't part of my selection move with that one line. cad-movecommand.jpg Here's a series of screenshots showing what I mean. I can't move just that line without moving the other lines around it.
View 3 Replies View Relatedim creating some 3d pipe blocks but im stumped on a block for a straight pipe. Basically I want to beable to apply the stretch command to a 3d pipe block which has the internal bore removed so its a hollow tube. I want to be able to have it as a block but also the be able to stretch it at either end.
View 9 Replies View RelatedI am relatively new to Cad and would like to know how to properly use the align command. I have a rotated drawing I'm trying to match up with a drawing that isn't rotated and I need to be exact. I know I can use rotate and mess around for a few minutes to get it done but I know using the align command would save me a lot of time.
View 9 Replies View RelatedJust upgraded from 2012 to 2013.....Why did they change the way you stretch a wall with grips???? Now, I cannot align a wall perpendicular to the inside of another wall, only the outside edge/face....Is there a fix or setting I am not aware of?
View 1 Replies View RelatedI cleaned up my block and I am trying to use a field to reference a polyline for it's overall distance. The distance changes with my lookup action. After rotating and going back and forth from "On" - "Off" - "Both Off", then back to "On", the red polyline doesn't stretch back on it's original plane.
View 5 Replies View Relatedpreviously i was using civil 3d 2010, now while i am using 2012. i want to create a grid of points with easting and northing. i have manually created a point but when i use array command it does not work properly. as u can see in this image.
i created point with proper values of easing and northing but after array easing northing values becomes just -19.
I`ve a problem when i`m using the stretch commend, for istance to move the position of a wall opening done with a poliline and there`s a door or a window block within the stretch area, this object stays in the original position whereas the lines has already been streched. This makes that I`ve to move manually the block to the new position. Is there any way to stretch objects and blocks together?
View 8 Replies View RelatedI accidentally got constraints in my present drawing and could not get rid of them. pls give me a hand on how to delete them. it is causing me a problem when for example i need to stretch a line that have a point (which makes part of the line) the point moves together with the line which means the original coordinate of the point is lost. THIS MUST NOT HAPPEN. i work with precise coordinates which means the coordinates of points should be kept as originals and NOT TO MOVE ELSEWHERE.
I notice i was using the multiple stretch with C option when I noticed the problem started and after that i had constraints sticked on all the lines.
How to get rid of constraints?
Is there a way to extend multiple lines along a curve, keeping the same distance between them? Like the stretch feature but able to stretch around a pre-drawn curve.
I've attached the drawing I'm working on. I would like to connect the top left portion to the bottom right portion with the lines that extend out of each using a curved sweep.
Got a problem with polylines and stretching the handles. Here [URL] ..... I've already described the problem once but it was still found no solution.
View 4 Replies View RelatedMy right click sudenly doesnt open shortcut-menu? I went to options and right click customization and everythings fine there. Didnt touch anything at all!
View 8 Replies View RelatedAcad 2009, the revcloud command doesn't give the options for "style" or "object" anymore.
View 4 Replies View Relatedwithout reiterating a lot of what is said in this thread: [URL] ......
This happen outside the potential malware infection?
if you care to not click-through, the problem is that certain commands (not all of them) simply do not disply in the command line. so the MOVE command for example looks like this:
NORMAL:
Command: _move
Select objects:
NOW:
Command:
Select objects:
same with QSAVE and who knows how many others.
We have specialized electrical schematic drawings on what is termed roll-drawings. These roll-drawings are simply 12" tall and variable width type drawings. We've had some as short as 24 inches and as long as 900 inches. As a result we use these section dimensions to distinguish circuit boundaries. It's not a real dimension, just a way to distinguish what circuit is located where. I've tried to recreate it using a block for improved automation as currently we just use a lisp routine that draws an arrow and lines. It looks like the screen capture of my block below. Is it possible to have the inside endpoints of the lines automatically stretch outwardly toward the arrows as the attribute Value changs?
View 3 Replies View RelatedI have created a dynamic block with stretch points. I used the tester in the block editor and all works fine, but when I insert the block into a drawing, the grips for the stretch action are in a completely different place...I don't mean a different place on the block, but a different place in the drawing...way out there. so if I go into the block editor for the block while I'm in the drawing...the parameters have now moved way out of the way also, in the block...but if I actually open up the block itself and then go into the block editor, all the parameters are where i placed them in the first place.
View 1 Replies View RelatedAny commands or 3rd party applications that would allow me to move or stretch objects that reside in an XREF?
The cherry on top would be the ability to do this to only specific layers.
Voorstel spantenlijn.dwg
I have created a dynamic block. Herein I placed stretch actions parameter set to strecht parts including anotative text.
Now the block seems to work fine.
- When I am in modelspace and I change the annotation scale the text is changed correct
- When I am in modelspace and I change the stretch value of the dynamic block everything goes fine.
But when I am in modelspace and I change the stretch value in one of the annotiaton scales and then switch to another scale my text is changed annotativly (this is what I want) but the stretch value is set back to default (which should be at the changed value).
I am using Inventor 2009 professional and I have to run a stress analysis on a beam. I put the constraints and the forces I need and when I hit the calculate button, the results so up, but when I click on the results, nothing appears. I need to run this calculation and do not want to resort to hand calculations.
View 9 Replies View RelatedI am having problems with quick select not working properly in 2013 when I am cleaning up X-Refs selecting hatcing or anything else it does not just delete what I am tring to select it just deletes everything. If I go back to any prevous version of AutoCAD it works fine the only solution i can think of is to reinstall.
View 9 Replies View RelatedI'm having problems with the crop feature in an Inventor idw. Having cropped my view I then go into the browser to edit the crop (edit sketch), the lines on the crop window will not move and I am unable to edit the selection, why is this not working ? Occasionaly I can move / resize one or two of the crop boundry lines but never all of them.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
