AutoCAD 2010 :: Stretch Rectangle With Handles
Jan 18, 2012Got a problem with polylines and stretching the handles. Here [URL] ..... I've already described the problem once but it was still found no solution.
View 4 Replies
ADVERTISEMENT
AutoCad :: Stretch Rectangle To Exact Size?
Apr 25, 2012I have a rectangle that is the correct width (X) but the wrong height (Y). How can I stretch it so the height is exactly 200? I think I know all the features of the stretch command. I can select the right nodes using a crossing polygon and stretch it an arbitrary amount with the cursor. I can also add an exact displacement to the size it was before.
The trouble is that all changes are based on the existing size. And it wasn't an exact size in the first place.
So how can I set the height to exactly 200? The SCALE command is no good as it scales X and Y the same amount.
The obvious work-around is to draw another rectangle the correct size on top of the old one. But that's an admission of failure. Am I missing something, or is there really no way to stretch something to an exact size?
AutoCad :: Stretch Simple Rectangle 200mm To Right
Mar 1, 2007I have just been trying the stretch command. I have never used this before today so thought it might be good to learn a bit more.I have managed to stretch items ok but not accurately. I tried to stretch a simple rectangle 200mm to the right. I hit the stretch command and make my selection, hit enter then type in 200mm enter, and it goes right off the screen. If I drag the rectangle it's fine but not accurate.
View 9 Replies View RelatedAutoCad 2D :: How To Use Dynamic Blocks To Stretch A Rectangle Using Only 1 Point
May 22, 2013I was wondering if it is possible to use dynamic blocks to stretch a rectangle evenly, using only 1 point? I have attached a PDF of a rectangle with 2 lines coming out of each side (before & after picture). I want to use dynamic blocks to pick a point at the top right of the block, so that when I pull it out, the lines will extend, but stay attached to the rectangle. I also what the rectangle to stay in the center at all times.
View 9 Replies View RelatedAutoCAD 2010 :: Stretch Does Not Move Blocks
Feb 17, 2012I`ve a problem when i`m using the stretch commend, for istance to move the position of a wall opening done with a poliline and there`s a door or a window block within the stretch area, this object stays in the original position whereas the lines has already been streched. This makes that I`ve to move manually the block to the new position. Is there any way to stretch objects and blocks together?
View 8 Replies View RelatedAutoCAD 2010 :: How To Stretch A Line That Have A Point
Apr 24, 2013I accidentally got constraints in my present drawing and could not get rid of them. pls give me a hand on how to delete them. it is causing me a problem when for example i need to stretch a line that have a point (which makes part of the line) the point moves together with the line which means the original coordinate of the point is lost. THIS MUST NOT HAPPEN. i work with precise coordinates which means the coordinates of points should be kept as originals and NOT TO MOVE ELSEWHERE.
I notice i was using the multiple stretch with C option when I noticed the problem started and after that i had constraints sticked on all the lines.
How to get rid of constraints?
AutoCAD 2010 :: How To Stretch Lines Along A Curve
Oct 5, 2011Is there a way to extend multiple lines along a curve, keeping the same distance between them? Like the stretch feature but able to stretch around a pre-drawn curve.
I've attached the drawing I'm working on. I would like to connect the top left portion to the bottom right portion with the lines that extend out of each using a curved sweep.
AutoCAD 2010 :: STRETCH Command Not Working Properly
Feb 21, 2013I am currently using AutoCAD 2012 and having problems with the STRETCH command.When I select 3 lines, then deselect 1 of them lines and then select the STRETCH command it does not stretch the selected lines.
Now this is the way I have done in it in previous versions and it has worked. (AutoCAD 2010). Our Company has recently moved to 2012.Is this a function that has been removed with this version or am I doing something wrong?
AutoCAD 2010 :: STRETCH Command Not Working Properly
Oct 25, 2012On ACAD versions higher than 2005 the STRETCH command does not work properly. The problem happens when selecting the items from the left to right. The item is MOVED instead of STRETCHED. It works normally when selecting item from Right to Left. However I need it to work from Left to Right so that I can individually select the item that I want to stretch. Because of this, I am still using 2005. Both 2009 and 2012 have this BUG, making them un-usable for my applications. I just got a new computer with 2012 version only, but I can't use it. I am trying to get 2005 installed on it now.
View 5 Replies View RelatedAutoCAD 2010 :: Automatic Stretch In Dynamic Block For Attribute Value?
Jun 7, 2012We have specialized electrical schematic drawings on what is termed roll-drawings. These roll-drawings are simply 12" tall and variable width type drawings. We've had some as short as 24 inches and as long as 900 inches. As a result we use these section dimensions to distinguish circuit boundaries. It's not a real dimension, just a way to distinguish what circuit is located where. I've tried to recreate it using a block for improved automation as currently we just use a lisp routine that draws an arrow and lines. It looks like the screen capture of my block below. Is it possible to have the inside endpoints of the lines automatically stretch outwardly toward the arrows as the attribute Value changs?
View 3 Replies View RelatedAutoCAD 2010 :: Stretch Dynamic Block Grip Points
Jan 24, 2013I have created a dynamic block with stretch points. I used the tester in the block editor and all works fine, but when I insert the block into a drawing, the grips for the stretch action are in a completely different place...I don't mean a different place on the block, but a different place in the drawing...way out there. so if I go into the block editor for the block while I'm in the drawing...the parameters have now moved way out of the way also, in the block...but if I actually open up the block itself and then go into the block editor, all the parameters are where i placed them in the first place.
View 1 Replies View RelatedAutoCAD 2010 :: Move Or Stretch Objects That Reside In XREF?
Feb 22, 2012Any commands or 3rd party applications that would allow me to move or stretch objects that reside in an XREF?
The cherry on top would be the ability to do this to only specific layers.
AutoCad :: Stretch Actions Parameter Set To Stretch Parts Including Annotative Text
Mar 15, 2012Voorstel spantenlijn.dwg
I have created a dynamic block. Herein I placed stretch actions parameter set to strecht parts including anotative text.
Now the block seems to work fine.
- When I am in modelspace and I change the annotation scale the text is changed correct
- When I am in modelspace and I change the stretch value of the dynamic block everything goes fine.
But when I am in modelspace and I change the stretch value in one of the annotiaton scales and then switch to another scale my text is changed annotativly (this is what I want) but the stretch value is set back to default (which should be at the changed value).
AutoCAD 2010 :: Can Image Stretch From Left Or Right Or Top Or Bottom Side Instead Of Diagonal
Sep 11, 2013Wonder if can Can Image stretch from left or right or top or bottom side instead of diagonal ?
Reason is picture or tiff not correct length to the object of build.
I did scale to right length on "X" but the "Y" is off so how ?
I know that in Photoshop have stretch all side whatever I want but not in autocad 2011
AutoCAD 2010 :: Create Array (of Circles) That Stretch To Length Of Bar Spanning Left To Right
Aug 16, 2012Okay, I'm new to associative arrays, I'm attaching a drawing so you can see what I'm trying to accomplish with this. I'm doing an elevation view of a slab that has a cross section of the rebar. I've shown one of the bars spanning from left to right, represented by a rectangle, and the cross section of the bars running front to back represented by circles. You can see what I'm trying to show here. In the drawing I've attached, the top three sketches are examples of how this would look if it were working correctly.
What I'm trying to do is create an array (of circles) that will stretch to the length of the bar spanning left to right. I want the quantity of items in the array to automatically change based on the length of the bar and the spacing of items, so if there is 6" of spacing between the items instead of 12" it will automatically add twice the amount of items to fill in that space. I've been trying to use a path array, and it isn't working the way I want. I'm not familiar with rectangular arrays, so not sure what to do there either.
AutoCAD 2010 :: Dynamic Block Rotate Part And Stretch Arcs To Stay Connected
Jun 18, 2012I have a block that I would like make dynamic. It is a fishhook arrow for a roundabout traffic sign. I would like to rotate the head to various angles, and have the body of the arrow adjust. I already have the ability to stretch the two end points in their direction, and rotate the head, but the curved part of the arrow body needs to adjust for the new head location. I tried dynamic stretch, but it would not attach to the rotate dimension. How do I get these arcs to stretch along their radii and associate the end arc points to the near end of arrow head?
I had one thought of using multipe arcs so that they would overlap more or less as rotated, but this is a pretty crude workaround.
LT, C3D 2005 - 2014
XP, Vista, 7
AutoCAD 2010 :: Rounded Rectangle In Baseplate
Apr 10, 2013this day one using autocad and my first post, I have to draw a rectangular slot with rounded ends in a baseplate. My question is how do I round the ends of the rectangle.
View 5 Replies View RelatedAutoCAD 2010 :: Constraint To Fix The Perimeter Of A Rectangle
Feb 5, 2013I need a constraint to fix the perimeter of a rectangle
View 3 Replies View RelatedAutoCAD 2010 :: Weird Rectangle Around A Block Looks Like A Crop
Jun 13, 2011i have some blocks have a rectangle rounded, there is a an arrow on that rectangle by clicking on it, it will do invert which will make the blockk dispear as if u doing a crop for an image but this time is a block is that normal.
View 9 Replies View RelatedAutoCAD 2010 :: Pick Box Turns Into Rectangle (not Square)
Dec 8, 2011The pickbox keeps turning into a rectangle and not a perfect square. It's width is less than its height. This keeps happening and is annoying. When I close AutoCAD 2012 and then reopen the drawing its a square, but soon turns into a rectangle.
View 4 Replies View RelatedAutoCAD 2010 :: Drawing Rectangle By Given Size (Width / Length)
Jun 3, 2012Why my AutoCAD now draws rectangles based upon coordinates and not by a given width and length as use to be?
View 4 Replies View RelatedAutoCAD 2010 :: How To Make White Rectangle That Represents Paper In Paperspace Larger
Dec 6, 2013I am trying to use a title block I made as a template in a paperspace. I made the title block in the model space of a separate drawing, its origin is at 0,0. I used the WBLOCK command to make the title block into its own saved block, but when I insert it into the paperspace of the drawing that I want to use the title block in the drawing of the title block is larger than the white rectangle which represents the paper. I can insert viewports and print the drawing fine, but the drawing of my title block being larger than the white area of the paperspace bugs me. How do I make it bigger?
View 1 Replies View RelatedIllustrator :: Convert Expanded Appearance Rounded Rectangle Back To Sharp Cornered Rectangle
Mar 12, 2013Any quick tips to convert an expanded appearance rounded rectacngle back to a sharp cornered rectangle?
View 6 Replies View RelatedPhotoshop :: Rounded Rectangle With Other Layers As Actual Rectangle
Feb 14, 2011I have 4 layers (background, layer1, layer2, layer3-text). They fill all 300 x 600 pixels that comprise the .psd/future image. What I want to do is use a rounded rectangle to encompass all of the other layers, so that the surrounding pixels (around the rounded rectangle) are transparent.
I want all of my current layers to be the content of a rounded rectangle.
Photoshop :: CC / Convert Rectangle To Rounded Rectangle?
Jun 28, 2013I saw that the Rounded Rectangle properties were not available on the regular rectangle (to change corner radius).
View 5 Replies View RelatedAutoCad :: Handles All Over The Place?
Jun 25, 2013how to get rid of this garbage in the attached picture? I remember when it was only Ustation that caused this grief. I guess autodesk decided to catch up
View 9 Replies View RelatedAutoCAD .NET :: Test For Duplicate Handles In A File?
Dec 3, 2013How would I test for duplicate handles in a file. If I select a cirlce from an xref and it has a handle of "E6" Then I select another circle from a different xref that has the same handle. When I use GetObjectId how do I specify which handle? Is there a way to give a handle and a file path and have it point to the correct entity or would I need to cycle through all entities and check for matching handle and file name?
In the end I would like to select an object, then store that data in a file and then recall that exact same object later.
AutoCad :: Exporting Handles And X Y Coordinates From Polyline And Resulting In Text File
Dec 21, 2011Code that I can run to export the handles and x y coordinates of closed polylines and show results in a text file.
View 9 Replies View RelatedPhotoshop :: Bounding Handles
Jul 5, 2006I have a file that is 13 x9. In print dialogue box I used the bounding handles to shrink it to 9x6.
Now today I want to print at true file size. I open image size dialogue box and it is still 13x9. But when I open print dialogue box it still says 9x6? why? and it look 9x6 in the preview, not 13 x9 which is the real size of file -- so I'm confused.
If I type in 13 x9 or use bounding handles again to get 13 x9 am I now upresing the file??
Photoshop :: Crop Handles
Mar 9, 2009When I open the crop tool I only get crop handles on the four corners of the crop area. The crop handles at the midpoints do not appear. (I get only 4 handles, not 8 handles.)
View 6 Replies View RelatedIllustrator :: Arc Tool Handles
Sep 23, 2013I am having problems with my arc tool in illustrator, sometimes it decides to make the handles invisible. making it a very slow process to edit the arch once it is drawn,
to locate the handles I have to grab the end anchor point with the direct selection tool and move the anchor point around, which seems to be the only time the handles for that line or shape become visible. once I realease the mouse, the anchor point are no longer visible. I have to try and remeber where the handle was and keep hovering my mouse around this area until the little "handle" text becomes visible.
This has only happened a couple of times, the first time I re-opened illustrator and I no longer had the problem, but today after reboting illustrator the problem persits.