AutoCAD .NET :: Test For Duplicate Handles In A File?
Dec 3, 2013
How would I test for duplicate handles in a file. If I select a cirlce from an xref and it has a handle of "E6" Then I select another circle from a different xref that has the same handle. When I use GetObjectId how do I specify which handle? Is there a way to give a handle and a file path and have it point to the correct entity or would I need to cycle through all entities and check for matching handle and file name?
In the end I would like to select an object, then store that data in a file and then recall that exact same object later.
View 6 Replies
ADVERTISEMENT
Dec 4, 2013
I am writing a external ilogic riule, which will iterate through all the referenced documents of the active assembly and write certain iproperties to a text file.
The code is below
It works in that the text file is created and it does write the iproperties. HOWEVER it only writes the iproperties from the active assembly
' go through all referenced documents in a assembly . Grab the description,title and part number iproperties
' and print out a list
If Not ThisApplication.ActiveDocument.DocumentType= kAssemblyDocumentObject Then
Return
End if
[Code]....
How can i fix this code so that it writes the iproperties for each oFileRef ?
View 9 Replies
View Related
Dec 21, 2011
Code that I can run to export the handles and x y coordinates of closed polylines and show results in a text file.
View 9 Replies
View Related
Sep 8, 2013
Today as a precautionary measure I downloaded the Adobe font test to do a scan on my fonts to see if any is corrupt. The test showed that all my fonts passed. 3 questions though:
1. Does the script work with photoshop CC?
2. Could I just delete the font test jsx file from the folder when I am done with the test? Or should I keep it there?
3. During the initial process, I was unable to proceed and got an error message "failed to get path for font cache files". As such I unticked the clear font caches to proceed. Would this have affected the results?
View 1 Replies
View Related
Oct 18, 2011
I'm using Lion, and to install the Leopard version of GIMP. I'm getting an error message, and don't know what action to take:
Unable to open a test swap file.
To avoid data loss, please check the location and permissions of the swap directory defined in your Preferences (currently "/Users/myname/Library/Application Support/Gimp").
View 2 Replies
View Related
Oct 25, 2011
An IPN file is showing multiple assembly files in it's browser even though I have confirmed there is only one of the assemblies in the IAM file.
I'm not sure if it's causing any real difficulty in the IDW views but it's not giving me any confidence.
When is the poor, undercared-for part of the software going to get an overhaul?
View 2 Replies
View Related
Mar 31, 2012
I want to duplicate a solid body 4 times in a part file. i did that by going for circular pattern. But after creating that, i had to add on few more features. I did that in parent solid body. then I noticed that other 3 solid body is not getting updated. I know in assembly file it gets updated but any way in part file.
View 3 Replies
View Related
Jan 24, 2012
I'm trying Frame Generator one last time to design the custom frames we build for our equipment. I've always had problems with getting FG to generate the right part numbers and file names. I have the part numbers figured out, but does Frame Generator still not have a good way to automatically create unique file names for frame members? If no one can get it to automatically generate unique file names, how do you manage all of the duplicate file names generated over time?
View 1 Replies
View Related
Sep 11, 2012
why content center creates duplicates of existing folders?. Some of the folders have 6 or 8 versions and there is also a duplicate EN-US folder within the EN-US folder with nested folders. So bottom line i have multiple locations and nested files within the content center. Needless to say there is a lot of time spent pointing inventor to the parts necessary to open an assembly.
We are working on a network and are all pointing to the same content center location. We are all using the same project files. Sometimes it works as you would expect, other times not.
Windows 7 64 bit
Inventor 2012 Professional
Dell T1600 CPU E31245 @ 3.30GHz
8 GB RAM
View 3 Replies
View Related
Apr 30, 2013
I have determined that an AutoCAD drawing has the unfortunate ability to have Annotation Scales "hard coded", meaning they CANNOT be removed from the drawing.
Let me explain....
In a detail drawing file (i.e. my master drawing file where I keep all of our standard details), I was getting duplicate Annotation Scales. I would try to use the SCALELISTEDIT command to try and delete the anno scales not being used, but it would appear they WERE being used. (and resetting the anno scales didn't work either)
I was using a combination of tricks to determine WHICH annotation objects were using the duplicate anno scales. I would set ANNOALLVISIBLE to 0 and set the CANNOSCALE to the duplicate anno style to see where they were being used with no luck
I would then use the QSELECT command to group select each type of annotation object that were annotative, and check to see if they were using the duplicate scales. Again, no luck
THEN, I decided to cut-n-paste each detail one-at-a-time from my master drawing file to a new BLANK drawing with only one annotation scale in it (i.e. 1:1). I would paste a detail, and then enter the SCALELISTEDIT command to see which anno scales "came along for the ride". I pasted a particular detail that carried over the duplicate anno scales, but when I checked all of the annotation objects for the duplicate anno scales - NOTHING! I then deleted that particular detail, purged it, and then I was able to delete the duplicate anno scales. But no matter what I did to try and fix that detail (i.e. wblock, cut-n-paste, save-down, etc) the duplicate anno scales simply will NOT be allowed to be deleted even though i cannot find any objects associated with them.
View 8 Replies
View Related
Jun 29, 2006
I am printing a program that is half of one 8.5x11 sheet, so I'd like to print 2 programs per sheet - I have resized the canvas of the document to 8.5x11, but is there an easy way to copy all the layers in the .PSD over to the other side of the sheet? I know I could flatten the image and copy it, but I'd like to retain the layers.
View 6 Replies
View Related
Jan 7, 2014
I have upgraded from LR4 to LR5. LR4 allowed duplictes to be imported - one a jepg the other same file name but raw (CR2). LR5 does not allow me to do this. Am I mistaken or am I over looking something?
View 1 Replies
View Related
Nov 4, 2013
When I try to import a photo, Lightroom5 tells me that my photo is a duplicate. When I search for the duplicate from within lightroom, lightroom can't find it by filename. When I search for the duplicate using a file manager outside of lightroom, the file manager can't find the duplicate either. I don't believe there is a duplicate file that has been imported in Lightroom.
View 1 Replies
View Related
Aug 26, 2013
On creating images in bitmap mode using illustrator into eps format and convert the eps file into pdf using acrobat distiller.
On pdf file its showing two objects in the content panel with one object present in low resolution other one same as its original.
It will not happen in direct pdf from illustrator
It will not happen in grayscale mode.
View 1 Replies
View Related
Nov 18, 2013
I normally get the UCS directions as part of a test to see if current coord system is same as world:
I am seeing a nonnormal UCSxdir and Ydir for several drawings with UCS I know is on world. See the above value.
It took me a while to realize it was because the drawing had ps viewports, and the viewport UCS was user.
How would I get what I would call "the modelspace current coord system info" to do this test.
I am doing this with a drawing not open in the editor, it is DBX style. If it was not, I could do all kinds of things to figure out if modelspace was on world ucs.
[URL] ........
View 1 Replies
View Related
Feb 22, 2005
how to test to see if a drawing is already open inAutoCAD using VBA and if it to make it the active document?I have a VBA macro to open xrefs by by just picking them in the drawing butI need to test to see if the drawing may already be open to avoid openingthe drawing a second time in "Read Only" mode.
View 9 Replies
View Related
Feb 25, 2013
I am just starting to create some custom linetypes. All is well with solid lines with text. However I have reached a stumbling block as far as hidden lines go.
Basically I get this result -----x-----x-----x-----x-----x-----x-----x-----x-----x
But I am looking for this --------------------x--------------------x--------------------
Not sure how to do this as I get an error message saying that I can only have 12 dash/dot entries before the text.
The plumbers in our don't want to see text that often.
View 4 Replies
View Related
Aug 28, 2012
I have recently used back up for the first time whislt replacing my computer and moving to Windows 7. I now have different pictures with the same file name on the back up drive (F:) and the computer hardrive (C:). When I click on a picture the picture inOrgnaiser appears and then qickly disappers and the second picture with the same file nane appears. The first to appear is that on the C drive the second is that on the F drive, the back up drive.
View 3 Replies
View Related
Jul 11, 2012
Is there a way to simulate a simple tensile test in autodesk inventor. Let's say I draft up a 1" x 1" x 10" bar. If I input all of the material properties such as yield strength, tensile strength, % elongation etc., is there a way that I can simulate a simple uniaxial tension test on this bar? If so, how do I set it up with the autodesk simulation engine?
View 6 Replies
View Related
Mar 21, 2012
Text is displaying at the incorrect size in both paper space and model space. It seems that there may be some kind of global scale factor in action e.g. if I add text at size 2.5, it displays at size 2.25 and if I add text at size 1.8, it displays at size 1.62.
How do I set so that text is displayed at the correct size?
View 5 Replies
View Related
Nov 28, 2013
I have a link starting from P1.Is there a way to check if the link is intersecting EG or not?
Civil 3D 2014 x64
Windows 7 64-bit
16GB RAM
View 2 Replies
View Related
Jul 14, 2010
I am currently using the following to switch to modelspace:
Editor ed = Application.DocumentManager.MdiActiveDocument.Editor;ed.SwitchToModelSpace();
However if you already are in modelspace it throws the error: eInvalidInput
How do I find out which space I am in so I can avoid running this when already in modelspace?
View 3 Replies
View Related
Apr 8, 2011
Im trying to write a routine in VB.net based on Fenton's examples from 'Zero to 3D in 60 Minutes'. the routine uses a filter set to select all 2D polylines in a document then a test is needed for each polyline to establish whether it is a loop, which can then be extruded into a solid or it is a non loop, where the operation will need to be an extruded surface, or if the polyline is a non-loop.
So far my code will pick up every 2D polyline and try and extrude it, but i need to catch the non-looped entities to handle them with an extrude surface method or if self-intersecting polylines, to either drop them and not cause an exception or process them in another way.
What entity attributes or methods should I use to perform testing to establish this loop and non-loop existance of the polylines to achieve this. I work with both C# and VB.net.
View 1 Replies
View Related
Sep 23, 2011
I would like to know the Cyclone simulation test on the switchboard?
Can it be done in Autocad 2012? What kind of software needed?
View 9 Replies
View Related
Nov 24, 2013
I'm testing out a simple Block Table in the Dynamic Block editor and when I go to save the Block, the following alert pops up. Is there a way to "test" the Block to check all the necessary constraints? Or am I just suppose to go about this with good 'ol fashioned trial and error? Seems the block is working just fine so is the alert just a moot point?
fully_cons.PNG
View 4 Replies
View Related
Nov 20, 2013
I have many slides, scanned over the past 10 years, with duplicate file names and filed by date. I converted my Elements 9 from PC to iMac and many incorrect connections occured. Is there a way I can correct these connection errors? This problem involves about 5% of my 25,000 photo files.
View 2 Replies
View Related
Feb 16, 2007
I am working on an AutoCAD OEM based product. I need to compare two DWG files as a part of GUI test automation. What is the best way to do it?
I have already explored Compare DWG, a third party tool available as a Menu option in AutoCAD. However, the ObjectARX library used by this tool does not get loaded onto the product under test. It gives a linker error as follows:
AcRxDynamicLinker failed to load 'C:Program FilesFurixCompareDWG 2006frxc2006_calc.arx'
View 7 Replies
View Related
Jun 28, 2012
I purchased and installed version PSPX4 in Jan. 2012, and started noticing, what appears to be, a duplicate copy of the same file with an Asian type file format in the Recent Doc folder. When I attempt to do a weekly scan of my system for spyware, malware, etc. and weekly clean up of my registry, temp files and other files taking up space, one of my programs finds files listed in the registry under the Recent Doc folder that it cannot clean as the format is not recognized. Even though the properties of the file link the file back to the folder the .jpg file is stored in, there really isn't a file with that format. This is just a reference, and very annoying.
Recent Doc folder showing reference to a duplicate image after copy and pasting as a new image.
View 3 Replies
View Related
Mar 22, 2012
Is it any option to keep text righ-reading even if block is rotated (by AutoCAD command ROTATE, not dynamic action)?
View 9 Replies
View Related
Jul 17, 2013
I have created a dynamic block which has hatchings in it.
In the block editor when I do a test of the block everyhting runs smoothly.
Howevfer when it is in model space it fails to keep the hatch boundary associativity. Even when the same dimensions are used as the block has as default.
Why would this be?
View 1 Replies
View Related
Jun 25, 2008
Is there a way to attach multiple leaders to text or weld symbols?
At the moment i am creating the "master" note, then insert "empty" texts and TRYING to get he leader to align.(the other problem is if i want to reposition)
View 2 Replies
View Related
