I have just been trying the stretch command. I have never used this before today so thought it might be good to learn a bit more.I have managed to stretch items ok but not accurately. I tried to stretch a simple rectangle 200mm to the right. I hit the stretch command and make my selection, hit enter then type in 200mm enter, and it goes right off the screen. If I drag the rectangle it's fine but not accurate.
View 9 RepliesI have a rectangle that is the correct width (X) but the wrong height (Y). How can I stretch it so the height is exactly 200? I think I know all the features of the stretch command. I can select the right nodes using a crossing polygon and stretch it an arbitrary amount with the cursor. I can also add an exact displacement to the size it was before.
The trouble is that all changes are based on the existing size. And it wasn't an exact size in the first place.
So how can I set the height to exactly 200? The SCALE command is no good as it scales X and Y the same amount.
The obvious work-around is to draw another rectangle the correct size on top of the old one. But that's an admission of failure. Am I missing something, or is there really no way to stretch something to an exact size?
Got a problem with polylines and stretching the handles. Here [URL] ..... I've already described the problem once but it was still found no solution.
View 4 Replies View RelatedI was wondering if it is possible to use dynamic blocks to stretch a rectangle evenly, using only 1 point? I have attached a PDF of a rectangle with 2 lines coming out of each side (before & after picture). I want to use dynamic blocks to pick a point at the top right of the block, so that when I pull it out, the lines will extend, but stay attached to the rectangle. I also what the rectangle to stay in the center at all times.
View 9 Replies View RelatedWhat I am trying to do is drawing a rectangle. But apparently autoCAD is acting up and wouldn't let me draw it. After clicking the rectangle button located at the top, I tried to draw a rectangle in the sketch area and this is what I got.
View 9 Replies View RelatedI wanted to create simple shape for rectangle such that its dimensions are selected from the block table. For that purpose, I have constructed the required constrains (geometric and dimensions) and then a “block table” (attached).
As I tested the behavior to have 1X2 rectangle (attached), I got a rotated one (attached)!-
I've been trying to insert simple white text into a black rectangle I created. I've been trying to do it but I cant seem to figure it out.
View 12 Replies View RelatedI have been messing with a simple black rectangle and when I transform it, jagged edges appear. This is the base for a logo for web. I have anti-alising checked in pref. The logo looks horrible and blurry/jagged on the edges even when previewed on several screens from pc to mac.
this is also happening with text, that has been made an object (top of text seen in the rectangle.)
Voorstel spantenlijn.dwg
I have created a dynamic block. Herein I placed stretch actions parameter set to strecht parts including anotative text.
Now the block seems to work fine.
- When I am in modelspace and I change the annotation scale the text is changed correct
- When I am in modelspace and I change the stretch value of the dynamic block everything goes fine.
But when I am in modelspace and I change the stretch value in one of the annotiaton scales and then switch to another scale my text is changed annotativly (this is what I want) but the stretch value is set back to default (which should be at the changed value).
Illustrator keeps freezing when applying an effect such as texture-grain to a simple gradient, or even rasterizing a simple black circle. My system is about a 6month old macbook pro with 16gb ram, i7 and AMD Radeon HD 6770M 1024 MB. What could be causing this? It wasn't like this when i first started using the laptop but has started to do it everytime i try and do any of those simple tasks recently.
View 5 Replies View RelatedAny quick tips to convert an expanded appearance rounded rectacngle back to a sharp cornered rectangle?
View 6 Replies View RelatedI have 4 layers (background, layer1, layer2, layer3-text). They fill all 300 x 600 pixels that comprise the .psd/future image. What I want to do is use a rounded rectangle to encompass all of the other layers, so that the surrounding pixels (around the rounded rectangle) are transparent.
I want all of my current layers to be the content of a rounded rectangle.
I saw that the Rounded Rectangle properties were not available on the regular rectangle (to change corner radius).
View 5 Replies View RelatedI only just got photoshop yesterday and I barely know a thing but I have got an image with 3 layers and I want to make it into a simple animation, displaying each layer in turn.
I am a novice user using C2
I use "Add: Pick Points" to hatch my elevations. The hatch does not seem to stretch when I need to stretch the elevations. Is there a way to make it stretch?
View 4 Replies View RelatedPrior to 2013 I have been able to stretch wipeouts - it seems that this command no longer works!! Is there system variable that needs to be altered? or have Autodesk simply removed the functionality??
View 9 Replies View RelatedSimple problem: When I select a line, normally three grips appear; the ends and the middle. Normally, when I want to stretch (resize) a line I click one end and simply drag it to the desired location. Often it *snaps* to another nearby grip point, the middle selected grip, a line that it crosses, etc. If I zoom in I normally can put the grip any where I want to. It has worked fine up until this morning. Last night when I closed the program it worked perfectly...first thing this morning it doesn't work at all. Restarting the program and the computer had no effect.
The grip will only snap to the other origin (making it zero length) and other random points nearby. I cannot make it a random length...it must snap to those other points, and it *will not* snap to the middle point of the line, which I do all of the time.
Did I accidentally hit a CTRL+ or ALT+ key-stroke which has changed the abilities to snap?
I'm trying to add dimension with the stretch actions.
View 9 Replies View RelatedI have a few horizontal lines parallel to each other. I'd like to make all of those horizontal lines longer by multiplying their length by a factor (let's say 2)
The scale command doesn't work as I intent, since it makes the spacing between those lines "x" times greater as well.
Which command should I use?
I'm looking to make a dynamic block that will either strech up or down but some of the element stay the same in the other visivility
Here is a block i am talking about!
dynamic block.dwg
I draw ventilation ductwork all day at work, just recently stumbled across dynamic blocks.
Attached is what i have done so far, the straight section works perfectly, just having some trouble with the radius bend. What I need is for the arc to stretch with the angle of the bend.
TEST.dwg
In 2k9 in 3d i used to be able to click on a box and then click on a grip and see the height or width...but now i can't see the dimensions how do i get those dimensions back?
View 3 Replies View RelatedI have been having an issue with my hatches, especially when I use solid. I always make them associative but when I have to move an object using stretch, the hatch does not come along with it.
When I hatch an item I generally use the "pick points" option. Do I need to be using select objects?
I have accidentally cut on some function in autocad that I can't figure out how to cut it off. Now when I select an object, it has a UCS icon (red arrow & green arrow) in the center of the object and you can stretch the object by using the arrow or the box in the middle.
View 6 Replies View RelatedCurrently when I pick a grip at the end of a polygon line and type a length, the polygon goes to that length.
Is there a setting anywhere that changes this behavior to add the typed length to the polygon, hence stretching it to this new length. This would be the same as lengthen when drawing with lines.
how do I turn off the new "stretch" vertices?
I am finding that I click to select a line, and start typing commands, only to find out they aren't registering b/c I have selected that un-needed extra vertex in the middle of every pline segment.
I have checked the Options, and cannot find how to turn those off. They were not in 2008.
Civil 3D 2011
I`ve a problem when i`m using the stretch commend, for istance to move the position of a wall opening done with a poliline and there`s a door or a window block within the stretch area, this object stays in the original position whereas the lines has already been streched. This makes that I`ve to move manually the block to the new position. Is there any way to stretch objects and blocks together?
View 8 Replies View RelatedI've created a dynamic block with listed increments e.g. 36, 42, 48 inches width. The dynamic window block that comes with autocad has the same incremental stretch.
This block shows the tick marks as well as a the value in a dynamic input box. How can I have the value displayed in my custom dynamic block. All I have is the "tick" marks.
why the width parameter is only moving one side of the column. I drew both stretch actions following the same steps, then changed the multipliers to .5 and -.5 and only one of them moves. I've redone the block twice so what is going on here?
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
I have a problem with dynamic blocks.
I have inserted a dynamic block (with .NET) and changed the value of a dynamic parameter (Linear). The block is stretched as it should be. (no problems here).
After a fiew other routines, I select the block again (by using its objectID) and a want to get the coördinates of the grip of the linear dynamic paramter. Is there a way to get the coördinates based on the linear dynamic parameter and its grip points? code in vb.Net?
how i change vertical direction stretch value in autocad vba
my code is :
Private Sub CommandButton1_Click()
UserForm1.Hide
With ThisDrawing.SelectionSets
While .Count > 0
.Item(0).Delete
Wend
[Code]....