AutoCAD 2010 :: Drawing Rectangle By Given Size (Width / Length)
Jun 3, 2012Why my AutoCAD now draws rectangles based upon coordinates and not by a given width and length as use to be?
View 4 RepliesWhy my AutoCAD now draws rectangles based upon coordinates and not by a given width and length as use to be?
View 4 RepliesI am trying to draw 3D models for the first time, and something is confusing me. Sometimes when I draw a rectangle and it asks for a length width and height it seems the width means something else and the width means something else. I think the width means the distance from the z-axis on the XY plane, but then sometimes it is the distance from the Y-axis on teh XZ plane. I am just wondering if there is a good way to keep that a constant, or to remember which the length, width, and height is referring to at any given time.
View 9 Replies View RelatedI'm trying to change the size of a rectangle wall and I'm looking for "length" and "width" buttons in the properties manager box and can't figure it out. I thought I could just key in the new size after establishing an anchor point.
I've tried lengthen and extend. But the object is a closed polyline and what I'm doing is not working. Not having much luck with the key-grips either.
The wall is 47'2" and I want it to be 46' 8".
I found a lisp in the net to create a rectangle by marking objects in a draw.
But it would nice to get at the end of the lisp after creating the rectangle a output in the command line about the length and with of the created rectangle.
who can add the code for the length/width output?
(defun C:wer (/ AUSWAHL INDEX ELEM XYMIN XYMAX MINX MAXX MINY MAXY DATA A) (vl-load-com) (if(and(or (and (setq AUSWAHL (ssget "I")) (> (sslength AUSWAHL) 0)) (and (setq AUSWAHL (ssget)) (> (sslength AUSWAHL) 0)) ) (or(setq A (getreal "
Randabstand <0> : ")) (setq A 0.0) ) ) (progn (setq INDEX -1) (repeat
[code]........
I want to have a Blank size custom iproperty using flat extents length and width this is what i did but gives error is there a way to get this to work the way I want it to? I dont want a Length and width to be seperated would like it all in one.
iProperties.Value("Custom", "BLANK SIZE")=Round(SheetMetal.FlatExtentsLength, 3)"X"=Round(SheetMetal.FlatExtentsWidth, 3)
In our “Parts list” (or BOM as we call it) on our .idw’s we have field for “LENGTH”. For example, we use round tubing. We would list the cut length of that piece of tube in the “LENGTH” column. As it stands now, we add “LENGTH” as a custom iproperty in the .ipt. Then in the drawing we add that property to the parts list to capture the length. This works fine, but I’m wondering if we can eliminate some steps by capturing the actual dimension from the sketch to automatically populate the “LENGTH” value. Needless to say, this would eliminate room for error (less typing) and will update the value automatically if length is changed or if the part is copied. I suppose the same would apply for “WIDTH” on sheet metal parts... How do I do this?
View 9 Replies View RelatedIn PSE 12 what is the maximum image size, both in pixels (length x width) and file size (MB)?When will the manual be available online?
View 1 Replies View RelatedWith using superelevation wizard in Civil 3d 2012, changing the lane width is not affecting the resulted values of transion length and run-off length, Is that correct ? ( as civil is using standerd AASHTO tables which assume that lane width typically is 3.6m )
Also, There is only 2 tables for 2-lanes and 4-lanes roadway, Is it for total road width or for one directon only, and what about different no. of lanes ?
When I create new mtext in my drawings I normally like to have a zero width.
Instead I'm creating new mtext and it has a set width that I am unable to change in the properties window.
I have no problems with changing the justification point.
Is this a setting that I can change?
Plus is it posible to change the default so that I don't have to worry about changing it every time?
I have a problem in polyline width. when i set polyline width in one drawing shows solid line & in another drawing shows blank lines.
View 9 Replies View RelatedThe fixed width function did not work when I wanted to draw a fixed width rectangle. Is there a new way to do this in CS6?
View 4 Replies View RelatedI would like to determine the length, width, and height of a assembly.
Can i use the bounding box method to do this, or the range box?
Several times, we generate a drawing, and the text widths in the columns vary greatly. Some have text that is ten characters long, and others have thirty-plus characters.
Is there a way to be able to select the table (or perform the command to all tables in the current layout) and have each of the columns expand to the appropriate width, that depends on the longest string of text in that column, for each column. The problem I see, is that some tables have two columns, some have six, and of course other with any number in between. The same is also true for the amount of rows.
I am trying to create a iLogic Rule that will measure the Length, Width and Thickness of a part and ut it into the custom fields we have. I am having a hard time remembering how to get it to do it from the assembly level. I want to run this on the assembly and have it populate all the parts inside of it. The code below will do it for a part but what is it I add to get it to drill down into the assembly?
iProperties.Value("Custom", "THICKNESS")=Measure.ExtentsHeight
iProperties.Value("Custom", "WIDTH")=Measure.ExtentsWidth
iProperties.Value("Custom", "LENGTH")=Measure.ExtentsLength
Then I want to add this formula to the Stock Number iProperty = <Length> X <Width> I can get it to add the values but I can not get it to add the formula to the stock number.
How to predict what Inventor will choose for the length and width on a sheet metal flat pattern? We have similar parts (produced from iPart factory). Some of them use the small dimension for the width and some use the longer dimension for the width. This behavior seems random.
As a temporary fix we have set width = <sheet metal length> and length = <sheet metal width> on some parts to force the numbers where they should be.
I tried to attach the iPart, but it's too big .
Side note:
We DO understand how to use conditional suppression in iParts. We chose to use thicken instead to produce or exclude our notch in this case for reasons I could explain if needed. I don't think this has anything to do with our length/width issue, but wanted to included that info in case I'm wrong.
2012 SP1
I'm trying to create a dynamic block for a slotted hole, where I can specify and vary the width and length independatly.
To add complications, I also want the centrelines to stretch accordingly.
I've made some progress, it's 75% there, however certain combinations seem to 'break' the block.
ACad, MEP, 3DS Max
Windows 7x64
X5482 @3.2Ghz 8Gb Ram
Quadro FX1700
I am currently working for pepsi factory with huge machines in their factory building. My problem is that these drawings are very big and not loading quite well even in high performance systems. My current drawing size is about 120MB, without any hrefs.
View 9 Replies View RelatedDrawing size on an A4 at different scales,The A4 can have a drawing size up to 29.7x21 meters when printing with a scale of 1/100 while it can have up to 14.8x105 meters when printing with a scale of 1/500.
Does this mean that we need to have different title blocks each time we print in an A4 paper size with different scale?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I lost the ruler to adjust the width and length of mtext objects in the editor settings.
How can I get this ruler back?
We have a drawing that has been exploded purged, overkilled, audited and we still cannot decrease the size of it. Theres no blocks, theres no 3d, its a very simple drawing but I feear its corrupted. I've tried copy/blocking the information out of it but that just makes it crash. I cant attach it its too big! (16 meg)
View 9 Replies View RelatedI want to use photoshop cs6 extended to measure maximum length and width of objects (like in the picture below). how to do that? Is it also possible to do it automatically?
View 15 Replies View RelatedIs there are way to make the size of this dynamic, So you can drag it wider and taller, There are other boxes that seem to be frozen in size. I use this with many custom fields and it's difficult to enter data when you see what your doing.
View 2 Replies View RelatedI have always left my ltscale @ 1, but I ran a cross this question on a test."What is the Ltscale fact for a drawing plot size=200x150 and limits=(0.00,0.00) (600.00,450.00)
on the test it is multiply chose 2, 3, 4 and UCSVP..I don't want the answer just how do I figure ltscalt factor?
I am trying to insert a block in the drawing sheet, that varies in size dynamically. Is there anyway for changing the size of the block.
View 9 Replies View Relatedpeace sign.cdr
Howdy gang, I am trying to create a peace sign in CDX6, but I cannot change the lengths of the two angled members, as they seem to be selected in some special mode. I am sure that this is a quick fix (and I have a CD Book coming today) and obvious.
How do I control the width of a palette?
ps = New PaletteSet("MyPalette")
ps.Size = New System.Drawing.Size(164, 266)
ps.MinimumSize = New System.Drawing.Size(215, 150)
ps.TitleBarLocation = PaletteSetTitleBarLocation.Left
For some reason changing the Size and MinimumSize doesn't seem to have any impact.
Also..I've been basing a project on the width it allows me but on a lower resolution screen it loads cutting off the right hand segments of the controls.
I'm trying to plot in pdf many dwg file.
The files have a fixed height but variable in length.
The length of the file I'll take the "scroll".
So i want to create a paper size with a specific dimension.
psv.SetPlotConfigurationName(ps, "DWG To PDF.pc3", "Name of the paper");
How can I do?
I have a rectangle that is the correct width (X) but the wrong height (Y). How can I stretch it so the height is exactly 200? I think I know all the features of the stretch command. I can select the right nodes using a crossing polygon and stretch it an arbitrary amount with the cursor. I can also add an exact displacement to the size it was before.
The trouble is that all changes are based on the existing size. And it wasn't an exact size in the first place.
So how can I set the height to exactly 200? The SCALE command is no good as it scales X and Y the same amount.
The obvious work-around is to draw another rectangle the correct size on top of the old one. But that's an admission of failure. Am I missing something, or is there really no way to stretch something to an exact size?
How can i take size(width, hight) of rectangle in file autocad when i click it. And then will show this information on form in vb.net.
View 3 Replies View RelatedI have created a ilogic rule that should set the size and the cut length of my parts. Most of the time the rule behave as I want it to. But sometime it gives me a error. See attached picture. By the way, I have included this rule in my custom content center parts (beam's etc). The rule is:
'Turn off workfeatures
ThisDoc.Document.ObjectVisibility.AllWorkFeatures = False
'check if the part has any geometry
If Measure.ExtentsLength="0" Then
[code]........
What I am trying to do is drawing a rectangle. But apparently autoCAD is acting up and wouldn't let me draw it. After clicking the rectangle button located at the top, I tried to draw a rectangle in the sketch area and this is what I got.
View 9 Replies View Related