AutoCad :: Rectangle Wall Resizing - Length And Width Buttons
Sep 7, 2012
I'm trying to change the size of a rectangle wall and I'm looking for "length" and "width" buttons in the properties manager box and can't figure it out. I thought I could just key in the new size after establishing an anchor point.
I've tried lengthen and extend. But the object is a closed polyline and what I'm doing is not working. Not having much luck with the key-grips either.
The wall is 47'2" and I want it to be 46' 8".
View 5 Replies
ADVERTISEMENT
Sep 4, 2003
I am trying to draw 3D models for the first time, and something is confusing me. Sometimes when I draw a rectangle and it asks for a length width and height it seems the width means something else and the width means something else. I think the width means the distance from the z-axis on the XY plane, but then sometimes it is the distance from the Y-axis on teh XZ plane. I am just wondering if there is a good way to keep that a constant, or to remember which the length, width, and height is referring to at any given time.
View 9 Replies
View Related
Jun 3, 2012
Why my AutoCAD now draws rectangles based upon coordinates and not by a given width and length as use to be?
View 4 Replies
View Related
Nov 26, 2013
I found a lisp in the net to create a rectangle by marking objects in a draw.
But it would nice to get at the end of the lisp after creating the rectangle a output in the command line about the length and with of the created rectangle.
who can add the code for the length/width output?
(defun C:wer (/ AUSWAHL INDEX ELEM XYMIN XYMAX MINX MAXX MINY MAXY DATA A) (vl-load-com) (if(and(or (and (setq AUSWAHL (ssget "I")) (> (sslength AUSWAHL) 0)) (and (setq AUSWAHL (ssget)) (> (sslength AUSWAHL) 0)) ) (or(setq A (getreal "
Randabstand <0> : ")) (setq A 0.0) ) ) (progn (setq INDEX -1) (repeat
[code]........
View 7 Replies
View Related
May 11, 2013
With using superelevation wizard in Civil 3d 2012, changing the lane width is not affecting the resulted values of transion length and run-off length, Is that correct ? ( as civil is using standerd AASHTO tables which assume that lane width typically is 3.6m )
Also, There is only 2 tables for 2-lanes and 4-lanes roadway, Is it for total road width or for one directon only, and what about different no. of lanes ?
View 2 Replies
View Related
Nov 27, 2011
Refer to the attached file. How can I cut the RED part of the Wall 1 (W1) , where Wall 2 is sloped. I also want to cut a hole in wall 2 (W2) by the BLUE rectangle , but why I can't do that .
I also want to add a second floor to my project but I can only see the" Level" icon goes grey and I can't click it.
View 1 Replies
View Related
Oct 31, 2013
When I try to change the length of a wall it grows at both end. How to grow at one end only?
When I change the wall type to one with a different thickness, I cannot control which face of the wall remains fixed and which face moves. eg: change from 130mm to 250mm screws up my room width. How do I do this?
View 1 Replies
View Related
Nov 2, 2012
The fixed width function did not work when I wanted to draw a fixed width rectangle. Is there a new way to do this in CS6?
View 4 Replies
View Related
Apr 30, 2013
Is it possible to create a wall in AutoCAD Architecture that will change in size along its length. At one end of the concrete wall the wall thickness is 12", at the other end the wall thickness is 24" thick. The wall will grow in size from one length to the other.
View 6 Replies
View Related
Nov 19, 2007
I would like to determine the length, width, and height of a assembly.
Can i use the bounding box method to do this, or the range box?
View 3 Replies
View Related
Feb 12, 2013
I made an animation with adobe edge which I used in adobe dps. There is a button with touchstart (starts the animation) and touchend (play animation reverse). It works really well, but when I have the finger on the button it shows this gray copy-rectangle (the one with the blue little dots). The people at the adobe dps forum said it has to do something with adobe edge...
View 3 Replies
View Related
Apr 27, 2012
Several times, we generate a drawing, and the text widths in the columns vary greatly. Some have text that is ten characters long, and others have thirty-plus characters.
Is there a way to be able to select the table (or perform the command to all tables in the current layout) and have each of the columns expand to the appropriate width, that depends on the longest string of text in that column, for each column. The problem I see, is that some tables have two columns, some have six, and of course other with any number in between. The same is also true for the amount of rows.
View 7 Replies
View Related
Apr 26, 2012
I am trying to create a iLogic Rule that will measure the Length, Width and Thickness of a part and ut it into the custom fields we have. I am having a hard time remembering how to get it to do it from the assembly level. I want to run this on the assembly and have it populate all the parts inside of it. The code below will do it for a part but what is it I add to get it to drill down into the assembly?
iProperties.Value("Custom", "THICKNESS")=Measure.ExtentsHeight
iProperties.Value("Custom", "WIDTH")=Measure.ExtentsWidth
iProperties.Value("Custom", "LENGTH")=Measure.ExtentsLength
Then I want to add this formula to the Stock Number iProperty = <Length> X <Width> I can get it to add the values but I can not get it to add the formula to the stock number.
View 9 Replies
View Related
Nov 1, 2011
How to predict what Inventor will choose for the length and width on a sheet metal flat pattern? We have similar parts (produced from iPart factory). Some of them use the small dimension for the width and some use the longer dimension for the width. This behavior seems random.
As a temporary fix we have set width = <sheet metal length> and length = <sheet metal width> on some parts to force the numbers where they should be.
I tried to attach the iPart, but it's too big .
Side note:
We DO understand how to use conditional suppression in iParts. We chose to use thicken instead to produce or exclude our notch in this case for reasons I could explain if needed. I don't think this has anything to do with our length/width issue, but wanted to included that info in case I'm wrong.
2012 SP1
View 4 Replies
View Related
Jan 11, 2013
I'm trying to create a dynamic block for a slotted hole, where I can specify and vary the width and length independatly.
To add complications, I also want the centrelines to stretch accordingly.
I've made some progress, it's 75% there, however certain combinations seem to 'break' the block.
ACad, MEP, 3DS Max
Windows 7x64
X5482 @3.2Ghz 8Gb Ram
Quadro FX1700
View 6 Replies
View Related
Feb 17, 2012
I lost the ruler to adjust the width and length of mtext objects in the editor settings.
How can I get this ruler back?
View 2 Replies
View Related
Mar 1, 2013
In our “Parts list” (or BOM as we call it) on our .idw’s we have field for “LENGTH”. For example, we use round tubing. We would list the cut length of that piece of tube in the “LENGTH” column. As it stands now, we add “LENGTH” as a custom iproperty in the .ipt. Then in the drawing we add that property to the parts list to capture the length. This works fine, but I’m wondering if we can eliminate some steps by capturing the actual dimension from the sketch to automatically populate the “LENGTH” value. Needless to say, this would eliminate room for error (less typing) and will update the value automatically if length is changed or if the part is copied. I suppose the same would apply for “WIDTH” on sheet metal parts... How do I do this?
View 9 Replies
View Related
May 7, 2012
I want to have a Blank size custom iproperty using flat extents length and width this is what i did but gives error is there a way to get this to work the way I want it to? I dont want a Length and width to be seperated would like it all in one.
iProperties.Value("Custom", "BLANK SIZE")=Round(SheetMetal.FlatExtentsLength, 3)"X"=Round(SheetMetal.FlatExtentsWidth, 3)
View 2 Replies
View Related
Apr 30, 2009
how to do a simple resize of a rectangle marquee after I have drawn a selection onto my document.
I opened an image in a new PSD document, and drew a rectangle marquee around the selection I want to cut. Problem is the rectangle marquee isn't the size I want, so when I use transform selection to scale the selection, it causes the whole image to scale with the marquee I've drawn.
I don't want the image to scale, I just want the marquee I drew to scale into the desired size.
View 2 Replies
View Related
Oct 4, 2011
Is there a way of resizing a skewed rectangle without having the skew angle alter?
View 5 Replies
View Related
Jan 7, 2013
I want to use photoshop cs6 extended to measure maximum length and width of objects (like in the picture below). how to do that? Is it also possible to do it automatically?
View 15 Replies
View Related
Jul 8, 2013
peace sign.cdr
Howdy gang, I am trying to create a peace sign in CDX6, but I cannot change the lengths of the two angled members, as they seem to be selected in some special mode. I am sure that this is a quick fix (and I have a CD Book coming today) and obvious.
View 3 Replies
View Related
Mar 12, 2009
I am using Photoshop CS3 Extended
I am familiar with batch jobs in Photoshop.
I have images that vary in pixel size and resolution.
This project is for an online gift registry. First, we are hosting the images, but they have restraints due their web/system programming. So what I was told by the company was they need the images to be 300 x 300 pixel images at 72dpi. They said they would settle for 300 width only and let me scale the proportions and not worry about the height as I want to batch the process. But they stressed 300 width and 72dpi.
What I have tried is batch resizing all of them to 300 pixel width, worked fine. Then I batched changing the resolution to 72. But it changed all the pixel dimensions to various sizes. So then I tried to batch 300 pixel width and 72 resolution at one time at it ends up the same way. So what do I need to do to get 300 x 300 pixel and 72dpi?
1)I have read plenty of PPI vs DPI. Is "resolution" in Photoshop, PPI?
2)Was what they probably meant by 72dpi actually 72ppi?
3)How do I accomplish this?
View 2 Replies
View Related
Apr 30, 2013
Is it possible to create a wall in Revit that will change in size along its length. At one end of the concrete wall the wall thickness is 12", at the other end the wall thickness is 24" thick. The wall will grow in size from one length to the other.
View 2 Replies
View Related
Oct 29, 2012
Photoshop Elements 11. How do I resize an image by specifying the desired width or height in pixels?
View 3 Replies
View Related
Oct 2, 2013
In PSE 12 what is the maximum image size, both in pixels (length x width) and file size (MB)?When will the manual be available online?
View 1 Replies
View Related
Aug 11, 2008
Is it possible to use something like a parameter that would allow you to enter a width in the element properties window of the selected wall(s)?
we would like to have a generic wall (outline only) that the width can be changed per wall for layout purposes, then the walls will be selected & changed later to an actual wall with known materials.
View 9 Replies
View Related
Feb 19, 2012
I'm trying to finally utilize iLogic and all of its functionality (after using the basic features of inventor for the past 3 or so years) and I was wondering if there was a way to use iLogic (or some other feature for inventor) to resize text in a title block field of an IDW based on the length of the text entered (i.e. if the part's name was "Cam Retainer" the text height would be .12, but if its part name was "Spacer Cam Retainer Bushing" the text height would shrink down to .085 or something) so that it would still fit nicely into the text block?
View 3 Replies
View Related
Dec 14, 2013
Resizing objects is a mess in CorelDRAW X6 when objects are outlined with Scale With Object enabled to retain proportions after resizing.
None of the tools dealing with outlines (e.g. Contour or even Outline itself) continue to work properly after resizing the object.
I strongly suggest to recalculate outline property values after resizing if Scale With Object is checked. Don't just do it hidden somewhere internally in the object model by applying a temporary scaling factor. Instead actually recalculate the actual property values if Scale With Object is checked.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
View 9 Replies
View Related
Oct 12, 2013
whats the difference between creating a width using layers and using polyline width?
View 2 Replies
View Related
Jan 9, 2014
I'm having trouble with the spacing of my text when I import a .rtf file. The spaces change width based on the width of the columns. The problem does not effect all the paragraphs only select ones. If I change the width of the column the spacing of the text will fix itself. All of the text is the same text style. I have attached a copy for reference.
View 2 Replies
View Related
