peace sign.cdr
Howdy gang, I am trying to create a peace sign in CDX6, but I cannot change the lengths of the two angled members, as they seem to be selected in some special mode. I am sure that this is a quick fix (and I have a CD Book coming today) and obvious.
I am trying to do this tutorial: [URL]....... but I have a trouble at Step 3 : Creating Web Header - rather: Now go to the " Shape Tool ", double click on the bottom middle line to create a custom node / corners.
View 7 Replies View RelatedWith using superelevation wizard in Civil 3d 2012, changing the lane width is not affecting the resulted values of transion length and run-off length, Is that correct ? ( as civil is using standerd AASHTO tables which assume that lane width typically is 3.6m )
Also, There is only 2 tables for 2-lanes and 4-lanes roadway, Is it for total road width or for one directon only, and what about different no. of lanes ?
Im working with an image (pictured below) and I want to make all of the white bits clear, so as to allow whatever colour is behind to show through.
View 7 Replies View RelatedI am trying to draw 3D models for the first time, and something is confusing me. Sometimes when I draw a rectangle and it asks for a length width and height it seems the width means something else and the width means something else. I think the width means the distance from the z-axis on the XY plane, but then sometimes it is the distance from the Y-axis on teh XZ plane. I am just wondering if there is a good way to keep that a constant, or to remember which the length, width, and height is referring to at any given time.
View 9 Replies View RelatedI am trying to get photoshop to combine some objects in the stacked photos. I do not understand why after selecting all the various smart objects which are layered, and going to Layers- smart objects - stack mode is greyed out.
View 5 Replies View RelatedWhy my AutoCAD now draws rectangles based upon coordinates and not by a given width and length as use to be?
View 4 Replies View RelatedI'm trying to change the size of a rectangle wall and I'm looking for "length" and "width" buttons in the properties manager box and can't figure it out. I thought I could just key in the new size after establishing an anchor point.
I've tried lengthen and extend. But the object is a closed polyline and what I'm doing is not working. Not having much luck with the key-grips either.
The wall is 47'2" and I want it to be 46' 8".
I found a lisp in the net to create a rectangle by marking objects in a draw.
But it would nice to get at the end of the lisp after creating the rectangle a output in the command line about the length and with of the created rectangle.
who can add the code for the length/width output?
(defun C:wer (/ AUSWAHL INDEX ELEM XYMIN XYMAX MINX MAXX MINY MAXY DATA A) (vl-load-com) (if(and(or (and (setq AUSWAHL (ssget "I")) (> (sslength AUSWAHL) 0)) (and (setq AUSWAHL (ssget)) (> (sslength AUSWAHL) 0)) ) (or(setq A (getreal "
Randabstand <0> : ")) (setq A 0.0) ) ) (progn (setq INDEX -1) (repeat
[code]........
I have an existing polyline of approximately 5'. When I choose PEDIT where do I go from there to make the plolyline exactly 12'8"? I'm in architectural mode. Ooops, I forgot to say this is in DraftSight, which should be similar to AutoCAD.
View 8 Replies View RelatedI'm not sure if this has been answered yet but I'm customizing my content center and Im wondering can I change the {B_L} to show feet with inches and fractions
Just like you can in BOM for quanity
"AISC HSS" & " - " & {G_D} & " - " & {B_L}
I want to use photoshop cs6 extended to measure maximum length and width of objects (like in the picture below). how to do that? Is it also possible to do it automatically?
View 15 Replies View RelatedHow Do I find the total length of several objects or separate lines without having to click on each one individually and add them up.
View 5 Replies View RelatedIs there a way within AutoCAD to delete all objects within a rectangle (closed polygon) or all objects outside of the rectangle?
This then leads on to the question if you can trim to a rectangle or extend to it. I believe I have seen it done somewhere, but it was a long time ago.
I know there are LISP routines out there that can do it, but just this once I want to do it the hard way ;-))
My problem is I have received a drawing from someone else, but I only need part of it. So before inserting it into my drawing I need to get rid of the stuff I don't need. It's easy enough to define the boundary of the area I need, a rectangle or polygon.
I have created an object and unioned it with another object of what i assumed was the same length.
These nasty lines appeared and as i zoomed in an unwanted face appeared.
I have tried solid edit and delete face but it says gap cannot be filled. There is another unwanted face i am assuming on the other side but the gap is so small my computer always freezes and slows down before i can get in that close to examine it.
I'm extremely new to scripting; I managed to create a script to extend the artboard of my documents (which I was extremely proud of given my inexperience!) and another to align a couple of objects alongside each other, but my attempts to script some new code has met with failure.
Firstly, I need some Illustrator CS4 Javascript code that will create a bounding rectangle for the selected object(s). The selected object(s) will always be rectangular; no irregularly-shaped objects. I know this should be simple, but I can't work out the variables/attributes involved.
Secondly, some code to select the leftmost object in a document. And the equivalent for the rightmost object.
If it makes any difference, I'll be stitching these scripts together with an action to achieve the following workflow.
Two EPS files are dragged into an empty document as 'Linked Files'.The two Linked Files are aligned alongside each other. (Using a script I've already written.)The leftmost Linked File is selected and has a bounding rectangle created, which is then used to mask the Linked Object.The rightmost Linked File is then selected and has a bounding rectangle created, which is then used to mask the Linked Object.Both masked Linked Files are selected, and a bounding rectangle is created to mask them into the same Clipping Mask group.The artboard is set to the dimensions of this combined masked pair (I've managed to write that script already).The Linked Files are embedded into the document.
The reason for this is because we have EPS map files exported from AutoCAD that are left- and right-hand pages. These need to be combined into one file, but when they are brought in they lose their masks as the BBOX element is not recognised by Illustrator. The double-masking in my process above is needed to ensure that content from either map doesn't overlap the other half of the map.
A coworker brought this to my attention and I was also immediately able to reproduce this. We use content center C channels and other common beams a lot. After inserting one into an assembly if you right click and select change size and edit the length it typically doesn't update to the correct length.
Example:
Insert a 10" Ansi MC/C channel any size
right click and select change size
add +.0625 to the existing length and hit apply
measure it at 10.06252 in
repeat change size and type in 10.0625
measure it at 10.0625
repeat change size and type in 10 + .0625
and measure at 10.06252 in
It seems to mess up more when you do math but it also screws up entering a simple number
10.000325 usually ends up as 10.000315 in for me.
Editing the part directly from it's parameter dialog doesn't yield anything like this.
How can I draw a The smallest rectangle enclosing for a selected set of objects in current drawing?
View 9 Replies View RelatedI lost the ruler to adjust the width and length of mtext objects in the editor settings.
How can I get this ruler back?
There is problem with my CorelDRAW X6.
After I import different files in my working file, it's getting hard to work- RAM(16GB) is getting completely full and its almost unworkable!
I checked out Object Manager and found stack with "SVG data" and "Locked SVG data" object there under some basic shapes.
Stack is about from 10000 to 100000... Some times even more, but its not possible to select all them because Corel just stops. What is that- "SVG data" and "Locked SVG data" object and why they are so many there?
I often produce graphics in CorelDRAW, export it as en eps file and insert it inside a MS Word document as an image and finally convert it to pdf. This way my vector graphics (often linedrawings with or without fill) usually is preserved in the final pdf document. I can zoom in and the lines keep on displaying perfectly sharp. This is important, since it easily looks bad when thin lines are turned into bitmaps, even when watched from a distance.
Now, in some graphics I created today, I had a circle with fountain fill and outline (symbolizing a sphere) put behind a filled rectangle, which had a uniform transparency applied to it. In the resulting pdf file, the 'sphere' was turned into bitmap. Inside CorelDRAW everything was vector graphics, but something was loast in the process. what happens with the graphics in the different steps in the process and eventually could explain a workaround to make everything look as vector in the final pdf file.
If i draw e.g. the letter "R" i immediatly know height and width of this object. But what i want to know now is the exact length of the contour. How do i do that in X4?
View 2 Replies View RelatedWile using acad2011...
In model space I set the units form my dwg (cm), draw a line (100units). Next i go to paper space, create a viewport. When the viewport scale is set to 1:1 the ploted line is 100mm in length (not 100cm). Why is this so? How should I correct this? Changing of units in model space does not effect the length of the line in paper space.
When I have text and after a draw a recangle over it without any fill and if i try to grab the text I cant just grab the rectangle.
View 6 Replies View RelatedWhen I try to change the length of a wall it grows at both end. How to grow at one end only?
When I change the wall type to one with a different thickness, I cannot control which face of the wall remains fixed and which face moves. eg: change from 130mm to 250mm screws up my room width. How do I do this?
I am unable to print over 6' in length even if the file size is small. I am using a Roland SP-300.
View 5 Replies View RelatedHere to my issue:
In Corel Draw X6.1 I have a grayscale bitmap that I want to set as overprint over a rectangle with 60% (cmyk) black. This does not work as the white box is visible in both the preview and separations. If I set the rectangle to a spot colour it works, but in separations I get the image on a separate plate (colour) which is not what I need. I tried duotone vs cmyk, duotone vs spot, spot vs spot, etc none works, every time I have the same color for the bitmap and the rectangle it does not work.
the marquee select with the rectangular selection is often very limitated. Sometimes I wish to select multiple objects with a "free form", for example drawing the selection area with a polyline tool. Is this possible? I did not find a way to do it with the tool in CorelDraw (X5). Neither did I find solutions in the internet.
There's one tool, that does something very similar: the shap tool with ALT key can be used to select nodes by drawing a free line around the node. This is what I mean, but for objects not node.
i send 3 banners to print in a digital output (plotter) all 3 were 5200mmx1000mm
all of them cropped to 5080mm....
Is that a PDF file limit ? is corel X4 export problem ? depends on Adobe Acrobat Compatibility number (6) ?
I try to create a curve with 3 or more equal segments. When I draw random curve using the "Freehand tool" I always get curve with several not equal segments.So how can I create a curve using VBA Macro so that the curve has equal length of the segments.I attach two pictures with curve that i have and with curve that I need to have.
View 11 Replies View RelatedCan CorelDraw X4 calculate the length of a curve, meaning if I have an organic shape or curve, can it calculate the true length of the line if you follow the path. (think miles on a road)
I'm trying to estimate the time it would take a CNC machine to cut along an exported path.