AutoCAD 2010 :: Clicking On A .dwg On A Website Won't Open
Feb 1, 2012
When I click on a .dwg on a website, AutoCAD will not open the document and IE just loads a blank page. My default program for .dwg is set to AutoCAD DWG Launcher. This works on other PCs.
The only way to open the .dwg is to right-click the link, select Save-As, then double-click the file once it is saved on my PC.
I have installed autocad lt 2013 on a pc running windows 8 and I have a problem opening the dwg file. If I open the file dwg to autocad lt I have no problem, but if I try to open the file directly by double clicking on the file, the pogram creshed and appear an error message and the request to send report to autocad. how to riosolverlo?
We've upgraded to 2012 and have noticed a problem when fast clicking on the mouse when using commands.
For example when using the erase command I would usually type E and then quickly right click and left click. However in 2012 it brings up random command instead of erase i.e. sheetset, publish, ucs etc..Bringing up the text window afterwards it shows
Command: e ERASE Select objects: Specify opposite corner: *Cancel* 0 found Select objects: *Cancel* Command: _PointCloudIndex
The right click and left click are only processed once.This happens on all commands typed on the command line not just erase
when I'm in a part file and attempting to open the related drawing file by right clicking on the part name at the top of the design tree, the drawing can't be found automatically and I've to find it in the file open dialogue box.
I'm using PS4 Extended on Windows SP3 and whenever I double click on a JPEG, TIFF or PSD file, it will open Photoshop but the file itself does not open. I've checked to make sure PS4 is the chosen program to open with both in Properties as well as in File Types. Dragging and dropping a file into Photoshop will work.
In Bridge, when I double click on a image, it opens the image in Windows Photo Viewer rather than in Photoshop CS6 Editor. I have checked the preferences but all that it offers me is to open in Camera RAW. How do I change this?
Revit Architecture 2009 Suite, keeps locking up on one users machine when trying to access the open file window from the open icon on the toolbar or by using file then open or by using ctrl-o. Double clicking on a revit file from windows manager works fine. I tried uninstalling revit, deleteing the folders associated with revit and reinstalling and it still does the same thing.
1) If I double click on a file, it opens in Illustrator, but it does not open with my default workspace settings. If I open the file from the file menu, my preferred workspace opens. and 2) If I have one file open, I cannot double click on a second file and have that file open in Illustrator. I just get the little spinning circle and then it stops. I can still open a second file from the file/open menu option.
I have noticed that with CS 6, I can't fully use an application by clicking on it from another open application. If I am in Illustrator and Photoshop is in the background, I click on the Photoshop interface and it comes to the front of the screen, but that's all it does...no functionality beyond this. What must be done is for me to click on the Finder first, then click on the application icon in the Dock in order to access the program's functionality fully.
It doesn't matter if it's Lion or Mountain Lion...I have two machines with different operating systems and both do the same thing.
I don't know if this is an Adobe issue or an Apple OS issue. I have looked into all the preferences on the applications as well as the OS X control panels...no luck.
Running Mac os x Mountain lion (latest release 10.8.3 I believe) and Latest release of Gimp (just installed last week 2.8.4)
If I double click and open a file (file format doesn't matter, jpg,tiff, xcf etc) the file opens gimp and it opens correctly.
However If once gimp is open I try and double click on another file it pops up an error "The document "text.xcf" could not be opened. Gimp Cannot open files in the "Gimp Image" format.
If I then close gimp and double click that same file it opens gimp and the files opens as normal.
It doesn't matter if i'm logged in as administrator or a regular user. I've tried downloading the program and copying it back to the app folder again.
Perhaps I need to wipe out the GIMP folder in ~/Library/Application Support ?
I am having trouble with my CS3... have used for a number of years. It won't open a file. I click file, open.. and the selections go grey. I have uninstalled and re-installed and it does the same thing. I have re-installed on my data drive so there is plenty of room. I have 3.5 gb memory.. nothing else open.
I just want to open a picture by double clicking on it in a folder, why does Lightroom open the import dialogue, force me to close the dialogue, open Navigator, scroll down to the folder I already have open in Explorer, load the folder and then pick the picture I want?
On Windows 7, R-clicking on an image shows "Open With" CS6 but only 64 bit opens. How to also have 32bit as a choice? Since the majority of my plugins only work on 32bit I find using 64bit unfortunately useless. Hence I wold like to know if it is possible to right-click on asn image with explorer and have it open the 32bit version.
I have a weird problem with Photoshop CS. When I double-click on a tiff, jpeg, or Photoshop file it launches the program, but it won't open the image. In order to do that I must go to file and choose open. This is much more trouble. I can't figure out why. My photoshop guru friend couldn't figure out why. Any ideas?
Also, and this may or may not be related. When I open the program I get the following message: For Photoshop UI to display correctly, open System Preferences, click General, and turn off text smoothing for font sizes 8 and smaller.
The weird thing is, when I did what message suggested, I discovered that there was no "text smoothing" option to turn off under Preference (under General) in Photoshop. There is no General in the computer's System Preferences, so I'm assuming the message refers to Photoshop Preferences.
When press "open" the "open"-window dosn't open. Insted it open a comandpromt by the cursor that promt me to enter full search-way and name on the file I want to open.
I want to make changes to a jpeg. The image is already in my design.The menu offers the option to open the image in a external editor which at this time is Paint.I would like it to be Corel PhotoPaint.
when I trying to publish in single-sheet file. so I type publish on my command bar, then I chose publish to pdf but when i try to click on publish options to set the location where I need to put the pdf files the publish window freeze. same thing when i click on add sheet button.
NOTE: I have this problem especialy when I used AUtoCAD from home. to use AutoCAD from home I made borrow licence.
How do I get my Sheet Set Manager to open up each time I open a CAD drawing? I turned it off and can't remember how to turn it back on. I use command SSautoopen, set to 1 but doesn't alway work. Sometimes if I close AutoCad and reopen it I can got to drop down menu and click on .dst extension and it will open but if I close out of it it won't open again unless I restart AutoCAD. I thought I used a command from the Express Tool menu but can't find it.
I'm doing a program in Visual Basic 2010. In one of the forms I put a button that when clicked must open AutoCAD 2012 and make a drawing in it. The user will decide where to save it.The steps are these:
1. I added the references Autodesk.AutoCAD.Interop and Autodesk.AutoCAD.Interop.Common to the Visual Basic Project. That's OK.
Dim acadApp As New AcadApplication 'Create an instance of an AutoCAD Application AcadApp.Application.Visible = True 'Show the instance of the AutoCAD Application Dim acadDoc As AcadDocument 'Create an intance of an AutoCAD Document acadDoc = acadApp.Documents.Open("C:Respaldo TesisDibujo2.dwg") 'Open a Document called Dibujo 2 'Draw a line Dim PT1(2) As Double [code].....
I recently loaded several versions of AutoCAD on to a Windows 7 machine. ALL versions will open a drawing if double-clicked from windows explorer, but if I try to open through AutoCAD, the program freezes as soon as I click on the "Open" button. This is true for AutoCAD 2010 through 2012.
Machine Specs:
Dell Optiplex 990 250GB HD 8GB Ram I7-2600 proc AMD Radeon HD 6670 (1Gb) Video Card
I also cannot open multiple instances of ANY version of AutoCAD in Windows 7.
I'm working in AutoCAd 2012. I tried to open a set of working drawings that i've been working on. The file won't open. So far, with no success, I've tried:
a) renaming the .bak file as a dwg and opening it.
b) inserting the file in a new drawing
c) inserting the file as an xref in the new drawing
d) using recover to recover and fix the file
e) using recover to open the backup file
f) using the partial open command to open the file.
In older versions of AutoCAD it was impossible to open two files simultaneously. I think it was added in later versions. Now I am using AutoCAD 2010 but I don't know if I can open two files and shift between them. If it is possible, how can I do that?
As a second question in the same subject, is it possible to copy objects from one file to another?
I use auto cad 2010.In my computer .dwg file is deleted but .bak is in my computer but when i rename the .bak file to .dwg file but it not open in auto cad 2010.
I'm having a problem that my file dialog box won't open when I go to open, new or save as. When I hit open, new or save as the command bar wants you to type the file name. My co-worker told me to type CMDDIA and change it to 1. But that didn't work for my error. How to fix my AutoCAD issue. I attached a .jpg of what the command bar looks like when I hit the open button.