AutoCAD 2010 :: Set UCS Angle By Selecting Two Points
Apr 12, 2013
In previous version you can rotate the UCS around the Z axis by tying UCS Z at the command prompt and then you were prompted to select two points to defin the angle. Now it uses a point at the ucs icon as the first point and only allows me to pick the second point. Is there a way to pick two points to define the UCS angle? I tried setting the UCS Origin to the first point and that did not work.
Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600
View 6 Replies
ADVERTISEMENT
May 21, 2012
I am doing takeoffs from a CAD drawing. Without getting too deep into it, I have one origin point, and then I have 200 or so points around the origin. I'm trying to find the fastest way to get the X offset, and the Y offset between each point and the origin.
Right now I'm drawing two lines to connect each point to the origin, then using PROPERTIES on the lines where they meet to get each length - I need to be able to see the numbers on the screen for a second while I copy them into a database. But I'm wondering if it would be easier to write a script, or if there happens to be a tool that could do this with fewer clicks.
View 3 Replies
View Related
Jan 17, 2012
I'm struggling with the maths needed to calculate the angle between 3 points. My eventual aim is to use vba to draw a crescent shape polyline, ie 2 arcs curving in the same direction and joiing at their tips. Both arcs will have different centrepoints but the same radius. The only info I know so far is radius (R), centrepoints (CP1, CP2) and the intersection points where their end points meet (IP1, IP2). I've gotten those points by using the 'IntersectWith' function on two circles.
My coding skills are fine it's just the maths I'm struggling with and after searching google for quite some time I'm still confused. I've looked at loads of differnet formulaes and diagrams, but it always seems like they aren't complete. Maybe it's just me.
View 3 Replies
View Related
Nov 6, 2013
I need very very often to know the angle between two surfaces to write cnc programms...At the moment i draw allways two lines normal to the line between the two surfaces an use then the angle measuring tool.Works good, faster then bks and dimensioning, but need also time and always need to delete the lines after...
Is it possible to get a lisp which ask für 1 point on the first surface, 1 point on the other surface and two points on the line between the 2 surfaces? So the lisp know 3 points of each surface and can give out the angle between... Should be allways between 0-180°
So it needs only 4 klicks to get a angle! That would be so great! Is there a lisp programmer who can make this possible?
View 9 Replies
View Related
Nov 22, 2011
I was wondering if there is a way to select specific 3D points out of a point cloud (.pcg). I am new with Autocad and handling of point clouds .
I can think of various things that you might want to do, as in clean up a bit the data or even delete some areas that you are not interested with. additionally, one might want to do some calculations, so selecting points first and the running a list script to use that points can be handy as well.
View 1 Replies
View Related
Feb 1, 2012
I want to move a few snap points on a line but not all of them... Usually I would shift + click each individual snap point and then move but when I have a lot of points it gets pretty time consuming.
If there was a way to drag select multiple snap points in a line.
View 4 Replies
View Related
Apr 10, 2013
What might be the cause of a several moment delay when selecting objects and/ or their grip points. It doesn't occur when a command is entered first. The longer a drawing is open the worse it seems to get. Is there any fix or adjustment that can be made?
View 2 Replies
View Related
Aug 9, 2012
what absolute points and relative points are in AutoCAD. What is the difference?
View 8 Replies
View Related
May 21, 2012
Is there a way to create a surface by manually selecting the points instead of creating a point group? I survey stockpiles for a local construction company and calculate volumes for them.
There may be 50 piles on one site and it would be a lot easier to create a surface by selecting the points manually instead of creating so many point groups.
View 9 Replies
View Related
Mar 7, 2014
Imagine a triangle with its top chopped off and the path open at the top. Is there a quick way of selecting those top 2 points and auto extending them to complete the triangle?If I use Object>Path>Average my 2 points move to join in the middle, they don't extend up along the same trajectory to join.
View 2 Replies
View Related
Sep 20, 2012
my copy of photoshop cs5.5 has no "use measurement scale" tab on the ruler tool bar. Is this right?
View 5 Replies
View Related
May 13, 2013
I can't seem to be able to select multiple points with the marquee. I'm on a mac... Usually you can select a grouped object, switch to point component and grab a whole chunk of points, then move them etc. I can't do this anymore!
View 1 Replies
View Related
Mar 14, 2012
I'm using PhotoShop from CS3 and have had a persistent problem with the polygonal lasso tool. Sometimes when I use it, the tool will only give me a few seconds in between mouse clicks to continue selecting. If I don't keep selecting new points (ie, if I leave the cursor hanging on the drawing with the selection still open), the lasso tool will automatically close itself. when I'm trying to do detailed selection work because it doesn't give me time to find the right point to select to before closing the selection over an area that ends up being useless to me.
View 2 Replies
View Related
Jun 24, 2013
When I try to select points in my vector shape (this one is selected), and I have other vector shape behind that one, I start dragging with Direct Selection Tool in order to select those two points, I got selected three points, two from first vector shape, and one more form shape that was behind and in the area where I was dragging selection. Also, now both vector shape become selected. Why is this happening if only one vector shape was selected?
I'm using Photoshop CC.
View 2 Replies
View Related
Apr 14, 2012
How to measure the indicated angle? I’m wondering why the AutoCAD can’t measure the angles indicated (magenta) in the screenshot below! The dwg file is attached
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 4 Replies
View Related
Aug 8, 2012
See the attached drawing.
The angle on the layout is slightly distorted. When I open the drawing on another computer it is fine. Even when I brought in a new chair ( on the right of the layout) at what is supposed to be a 90 degree angle it is slightly off?
View 5 Replies
View Related
Aug 7, 2012
I am in top view but my objects look distorted like they are on an angle?
View 3 Replies
View Related
Aug 7, 2012
I am in top view but my objects look distorted like they are on an angle?
View 2 Replies
View Related
Jul 30, 2012
Using the mvsetup, a colleague of mine rotated the model space in the viewport. I cannot determine what angle was used, is there an setting in the properties manager to show the rotation angle or other way to find out?
View 5 Replies
View Related
Aug 9, 2012
Im trying to change the default angle of 30 degrees on the isometric grid and snap. Is this possible?
View 6 Replies
View Related
Apr 4, 2012
Where can I find the “steel angle” L-shape?In the palettes, I could find the I, W and C steel shapes but wondering if the steel angle (L-shape) is somewhere else in the AutoCAD
View 3 Replies
View Related
Feb 15, 2012
How do you draw a line without the line length/angle showing as to go?
View 6 Replies
View Related
Aug 28, 2013
I'm looking for a lisp routine that allow me to select a text object that is rotated to anything other than zero, and it will change the text object to zero rotation and while still in the command allow me to place the text object on the screen.
I have a routine that is similiar called RT180 but it just rotates whatever text object you select 180 degrees from its current rotation, but I can not figure out how to modify it to rotate to zero rotation angle. What I like about RT180 is that you select your text it rotates it on the spot and then lets you pick a spot to place it.
View 3 Replies
View Related
Sep 25, 2013
before this i use in autocad 2007 and dont have a problem but in autocad 2012 have bug and only showing angle only
View 9 Replies
View Related
Oct 29, 2012
I have a 2D drawing that I used presspull to give the correct depth to. Now I have to make modifications to it that are angular to the presspull direction and am not sure that presspull is the correct way to do it. I've searched around for vids and have looked at quite a few, but am stumped. Don't know if I need to change the orientation so that the angle I want to cut is the direction for presspull or if I am simply looking at the problem wrong. If I knew how to take a screenshot, I would post some so that it would be clear how inept I am.
View 6 Replies
View Related
Dec 29, 2009
how to change the projection to third angle projection for ALL of my drawings in Inventor 2010?
View 9 Replies
View Related
Apr 17, 2012
What is the most efficient way to draw a line inclined by particular angle from another line?
I wanted to draw a line inclined by particular angle from another line but couldn’t get the best way to do that.
For example, in the screenshot below, I wanted to draw a line inclined by 60º from an existing line but couldn’t approach the best way to approach it.
How can I draw this line efficiently?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 9 Replies
View Related
Mar 13, 2013
How do I change the crosshair so it is at an isometric angle for drawing?
View 4 Replies
View Related
Apr 15, 2012
How to get the correct notation for the angle in degree/minute/second?
I wanted to show the angle as 29˚12’13’’ but not as 29d12’13’’
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 3 Replies
View Related
Mar 4, 2013
I used to select several items at once by clicking them and now it does not unless I hold the shift key .
View 3 Replies
View Related
Feb 15, 2012
I am using autocad 2012 new.. i hav problem with MOVE!
i am selecting an object to move but rather than moving it alone its moving like stretch!
View 3 Replies
View Related
