AutoCAD 2010 :: Objects Distorted Like They Are On Angle?
Aug 7, 2012I am in top view but my objects look distorted like they are on an angle?
View 3 Replies
ADVERTISEMENT
AutoCAD 2010 :: Top View - Objects Look Distorted Like They Are On Angle?
Aug 7, 2012I am in top view but my objects look distorted like they are on an angle?
View 2 Replies View RelatedAutoCAD 2010 :: Distorted Layout Angle
Aug 8, 2012See the attached drawing.
The angle on the layout is slightly distorted. When I open the drawing on another computer it is fine. Even when I brought in a new chair ( on the right of the layout) at what is supposed to be a 90 degree angle it is slightly off?
Illustrator :: Objects Being Distorted When Scaled CC?
Oct 23, 2013I am having issues with scaling objects that I have already created. I think it started because I inadvertantly turned on "Align new objects to pixel grid" But I have turned these off (under New Document as well as the Transform menu), quit Illustrator, and reset prefs.
View 5 Replies View RelatedAutoCAD 2010 :: Layout Screen Looks Distorted?
Aug 8, 2012My layout screen looks distorted. Here is the drawing, you will see the chairs and tables are off a bit in angle. I pulled up my view screen and the Z is at 1" which I don't know if that means anything, but it won't let me edit.
View 5 Replies View RelatedPhotoshop :: Pasted Smart Objects Are Distorted In CS6
Nov 21, 2012Any time I paste an object from AI into PS, it's getting horizontally squashed. Here's an example:
1. 12x12 pixel circle in Illustrator, aligned to pixel grid.
2. Pasted into Photoshop as a Smart Object, it's visibly distorted (12x11), but the W/H is inaccurately labeled 100%.
3. After pasted, if I select Edit > Transform > Scale, now the starting W/H are shown with the accurate distorted values.
AutoCAD 2010 :: Perspective View Distorted When Rendered
Jun 13, 2012I am having a problem with a view being shown rendered.
I have a tall piece of material handling equipment that is drawn to scale and is approximately 30' tall. When I render the view and take a shot of it, it looks angled based on the camera angle, when in reality it should appear straight (see attached picture).
How do I get this to look correctly?
AutoCAD Inventor :: Draw Rectangular Patterned Array Of Objects At An Angle?
Apr 24, 2013is there a way to create an associative array of posts so I only have to edit one part to have the entire array change? that is, I want to have global values for the dimensions in the picture below: post diametervertical width between post centreshorizontal width between post columns (again, centre to centre)vertical shift of each column w.r.t. previous one I've used the Rectangular Pattern tool to create a repetition of my posts, but I want to shift each column of posts up slightly with respect to the one before as in the attached picture:
It seems that if you want to repeat along non-perpendicular axes like this, Inventor fails if there are too many repeats. I came across this when searching the site:
[URL]
I can verify that this is my exact problem but can add that in my example, 4 repeats on the almost horizontal axis and 3 on the vertical work fine. However, 3 almost horizontal axis repeats by 4 vertical axis repeats will only work if I choose the vertical axis as Direction 2. (Is this a bug or am I trying to use the Rectangular Pattern Tool incorrectly?)
The repeat unit can be simplified to 1 circle with 2 construction lines along the repeat Direction instead of the 2x2 circles shown here but the problem persists. Also
AutoCAD 2010 :: How To Measure The Indicated Angle
Apr 14, 2012How to measure the indicated angle? I’m wondering why the AutoCAD can’t measure the angles indicated (magenta) in the screenshot below! The dwg file is attached
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD 2010 :: Aligning Objects In Modelspace With Objects In Paperspace?
Apr 10, 2012I'd like to know how to align an object in model space with the edge of my viewport in paperspace.
When I draw, I like to lay out multiple complete drawings in model space, make an appropriately scaled bounding box around them, and then snap a view port to the bounding box in my layout. I usually have multiple drawings lined up in a row in modelspace, so when I want a new layout I do a Save As and then pan around in my viewport to find the next bounding box, at which point I have to resize the viewport to get it to snap to the edges nicely. I really want to be able to to it the otehr way around- while panning I'd like to be able to grab a corner of my modelspace bouding box and snap it to the the corresponding corner of my viewport window. That way making new layouts would be a snap. Is there a way to do this in AutoCAD 2012 LT?
AutoCAD 2010 :: Set UCS Angle By Selecting Two Points
Apr 12, 2013In previous version you can rotate the UCS around the Z axis by tying UCS Z at the command prompt and then you were prompted to select two points to defin the angle. Now it uses a point at the ucs icon as the first point and only allows me to pick the second point. Is there a way to pick two points to define the UCS angle? I tried setting the UCS Origin to the first point and that did not work.
Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600
Illustrator :: Moving Objects A Certain Distance At Angle
Oct 3, 2012I'm trying to move an object a certain distance at a certain angle. I select the object and hit Enter to bring up the Move dialog. I enter the angle and distance, and instead of moving the specified distance, it moves some other distance. I don't get it. Am I doing it wrong? I can't imagine how else it's supposed to work. Here's a simple example:
Based on the angle and distance I entered in the video, the duplicate square should have been placed so that its lower right corner touches the upper left corner of the original. Instead, it only moved half an inch or so.
AutoCAD 2010 :: Selecting Objects BEHIND OR INSIDE Other 3D Objects
Jul 3, 2013Something changed in my settings & I don't know how to chance it back. I can't click on to select objects inside or behind objects. What do I have to change to be able to select any item I click on regardless of where it is?
View 1 Replies View RelatedAutoCAD 2010 :: Viewport Rotation / Cannot Determine What Angle Was Used
Jul 30, 2012Using the mvsetup, a colleague of mine rotated the model space in the viewport. I cannot determine what angle was used, is there an setting in the properties manager to show the rotation angle or other way to find out?
View 5 Replies View RelatedAutoCAD 2010 :: Changing Angle Of ISO Grid And Snap
Aug 9, 2012Im trying to change the default angle of 30 degrees on the isometric grid and snap. Is this possible?
View 6 Replies View RelatedAutoCAD 2010 :: Where To Find Steel Angle L-Shape
Apr 4, 2012Where can I find the “steel angle” L-shape?In the palettes, I could find the I, W and C steel shapes but wondering if the steel angle (L-shape) is somewhere else in the AutoCAD
View 3 Replies View RelatedAutoCAD 2010 :: Draw A Line Without Length / Angle Showing As To Go?
Feb 15, 2012How do you draw a line without the line length/angle showing as to go?
View 6 Replies View RelatedAutoCAD 2010 :: Lisp Routine To Rotate Text To Zero Angle
Aug 28, 2013I'm looking for a lisp routine that allow me to select a text object that is rotated to anything other than zero, and it will change the text object to zero rotation and while still in the command allow me to place the text object on the screen.
I have a routine that is similiar called RT180 but it just rotates whatever text object you select 180 degrees from its current rotation, but I can not figure out how to modify it to rotate to zero rotation angle. What I like about RT180 is that you select your text it rotates it on the spot and then lets you pick a spot to place it.
AutoCAD 2010 :: Lips For Show Length And Angle Cannot Use In 2012?
Sep 25, 2013before this i use in autocad 2007 and dont have a problem but in autocad 2012 have bug and only showing angle only
View 9 Replies View RelatedAutoCAD 2010 :: Angular Presspull Or Material Removed At An Angle
Oct 29, 2012I have a 2D drawing that I used presspull to give the correct depth to. Now I have to make modifications to it that are angular to the presspull direction and am not sure that presspull is the correct way to do it. I've searched around for vids and have looked at quite a few, but am stumped. Don't know if I need to change the orientation so that the angle I want to cut is the direction for presspull or if I am simply looking at the problem wrong. If I knew how to take a screenshot, I would post some so that it would be clear how inept I am.
View 6 Replies View RelatedAutoCAD Inventor :: Third Angle Projection For All Projects And Drawings In 2010?
Dec 29, 2009how to change the projection to third angle projection for ALL of my drawings in Inventor 2010?
View 9 Replies View RelatedAutoCAD 2010 :: Most Efficient Way To Draw A Line Inclined By Particular Angle?
Apr 17, 2012What is the most efficient way to draw a line inclined by particular angle from another line?
I wanted to draw a line inclined by particular angle from another line but couldn’t get the best way to do that.
For example, in the screenshot below, I wanted to draw a line inclined by 60º from an existing line but couldn’t approach the best way to approach it.
How can I draw this line efficiently?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD 2010 :: Change Crosshair So It Is At Isometric Angle For Drawing?
Mar 13, 2013How do I change the crosshair so it is at an isometric angle for drawing?
View 4 Replies View RelatedAutoCAD 2010 :: Get Correct Notation For Angle In Degree / Minute / Second?
Apr 15, 2012How to get the correct notation for the angle in degree/minute/second?
I wanted to show the angle as 29˚12’13’’ but not as 29d12’13’’
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCAD 2010 :: When Insert Xref In Model Space - It Shows In Angle
Mar 28, 2012I have a bit issue with inserting xrefs in model space .Basically, when I insert the xref in model space, the xref shows in an angle.
View 1 Replies View RelatedAutoCAD 2010 :: Rotation Angle Of The Text And Mtext Is Different In Properties Palette
Dec 19, 2012I've rotated my UCS 45° at Z axis and create a "mtext" and "text".
But when I check the angle of the "mtext" in properties palette is 0°.And the angle of the "text" is 45°.
why AutoCAD showing different angle for both objects which are in the same direction ?
[URL]
AutoCAD 2010 :: Embedded OLE DWG Objects In Word 2010 Not Opening
Feb 12, 2013Trouble with embedded OLE DWG objects in word 2010 not opening with AutoCAD 2012
We have a user that can't open some OLE DWG files from within a word document. He had 2010 AutoCAD LT on his machine for a while then was upgraded to 2012 AutoCAD (non LT) once that was there LT 2010 was unistalled. since then he has not been able to open certain embedded OLE files within Word. Other users that have other ever had AutoCAD 2012 have no issue opening this embedded DWG files.
i found this thread (URL....) which sounds exactly what is going on with my enduser. But the fix provided is for AutoCad 2000-2012 not the LT versions.
AutoCAD 2010 :: Missing Objects From Dwg In 2013 Save As 2010
Dec 20, 2012I am using autocad 2013 primarily and other employees are using 2010. I am saving my drawings as 2010 and for me there are no issues. On the other hand people using 2010 are having objects missing in the drawing. All layers are turned on and all thawed. The primary objects missing are AEC objects. Is there a switch to show or hide these object?
View 2 Replies View RelatedAutoCAD 2010 :: Popup Height / Depth /angle Box Is Missing In Model Space
Mar 20, 2012When i used to draw a rectangle, circle, line, etc- a box (or several) boxes popped up after i clicked the first point. These let me enter the distance then hit the tab button and go to a second box to enter height or angle depending on what i was drawing. There was also some popups that showed up when clicking the chamfer or fillet buttons but now those are all gone. When i input numbers, it goes to the command bar.
How can i get those small popup windows to reappear in my modelspace?
AutoCAD 2010 :: Taper Circular Object 1-1/2" High On 45 Degree Angle?
Jan 20, 2012I'm trying to figure our how to taper a circular object 1-1/2" high on a 45 degree angle from the top down (that is the lower part goes in like a pie pan). Taper doesn't seem to work.
View 2 Replies View RelatedAutoCAD 2010 :: MText Area - Adjust Single Line Text So That End Of Sentences Make Angle
Apr 5, 2013I use Mtext quite a bit and I am trying to convince others in the office that it's a good thing (versus single line text in long paragraphs). One of their concerns in the shape of the Mtext. For instance, when you use Mtext, you type into a nice rectangle that you can change the size of. What they have to do on occassion is instead of having a nice rectangle of text, they have to make it like a triangle. So in this case, single line text can be adjusted so that the end of the sentences make an angle.
Is there a way to do this using mtext? Or is there an lsp that will work?