My layout screen looks distorted. Here is the drawing, you will see the chairs and tables are off a bit in angle. I pulled up my view screen and the Z is at 1" which I don't know if that means anything, but it won't let me edit.
View 5 RepliesSee the attached drawing.
The angle on the layout is slightly distorted. When I open the drawing on another computer it is fine. Even when I brought in a new chair ( on the right of the layout) at what is supposed to be a 90 degree angle it is slightly off?
I am in top view but my objects look distorted like they are on an angle?
View 3 Replies View RelatedI am in top view but my objects look distorted like they are on an angle?
View 2 Replies View RelatedI am having a problem with a view being shown rendered.
I have a tall piece of material handling equipment that is drawn to scale and is approximately 30' tall. When I render the view and take a shot of it, it looks angled based on the camera angle, when in reality it should appear straight (see attached picture).
How do I get this to look correctly?
Using Photoshop CS3, I recently moved from a 19" CRT to a 21.3" LCD. Now my palettes are located in the center of the screen. How do I move them to the sides of the screen.
View 3 Replies View RelatedI need to set up a page layout with 4 separate A3 pages and have them as a 2x2 layout on screen
The overall size will be A1 but the printers require A3 files outputted as pdfs
I am trying to plot a paper space as JPG, the drawing scale is 1:1 the paper is the size an a4 page, I tried using the publish to web JPG.pc3 but the lines come out as gray and faint, I tried all the different combination of pixels and scale but without success!
View 5 Replies View RelatedI have a drawing with a 40 layout tab, so i need to separate all this layout tab in separate drawing, i try save as layout drawing but the layout goes into the model space, i need still in the layout tab.
I want to know if there's a command or an LSP to separate all the layout tabs?
I have a layout with four viewports in different scales.
When I select one viewport and turn a layer off, all the others viewports turns the same layer off.
Thesame happens when I turn on/off the Freese-button.
We have a problem with AutoCAD R2011. The drafter made a rectangle, put some M Text in it, and when he looked at the layout the text does not show up. It's on a visible layer, and when he takes some existing text and sticks it in the rectangle, it works fine. We are just using "MatchProp" to work around the problem. Is there a way to "globally" set the text properties of the drawing to those of a particular instance of text?
View 3 Replies View RelatedHow to modify the settings of more than one layout in one go?
I wanted to choose the same printer for many layouts but I found out that I need to modify them one by one.
Some of these layouts have “Adobe pdf converter”, others have the “DWG TO PDF.pc3”. What I need is to set the printer “DWG TO PDF.pc3” for all the layouts in one go.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I am having an issue with a 3D drawing (xref) with size very large and crashing due to lack of memory. I want to compress it into a 2D layout. How do I compress a 3D drawing into a 2D drawing or something much smaller than the 47 MB it is now?
View 3 Replies View RelatedI am new user in AutoCAD 2011.The situation is:How can I output to PDF when one Layout with many drawing?
I know how to output to PDF when one Layout with just one drawing(use Page setup + Publish), any many Layout one of them just with one drawing.the attachment will show you the 2 situations
1) one Layout with many drawing
2) one Layout with one drawing
I received a drawing that has a layout with multiple mviews in it. There is a light grey grid showing in the layout, that I can't make disappear. Grid on / off command has no effect. Really it doesn't matter if the grid is showing, but it's so annoying! Creating a new layout would fix the problem, but is there an easier way to get rid of the grid?
View 9 Replies View RelatedI would like to be able to consolidate my layout tabs. I have a drawing of a factory that is of some size and the plant is continually growing. I like having all of my information in one place as the drawings (one .dwg file) change. AutoCAD is not capable of doing so? I'm not willing to break up into separate dwg files either.
View 4 Replies View RelatedHow can I update automatically my sheet set when I have created a new layout on my drawing? I mean it's awful to drag my new layout into my set for added as a new sheet! Is there an other way to save it and automatically have my new sheet?
View 2 Replies View RelatedWe just received ACAD 2012 and I would like to turn off the layout tab preview option/function. We have drawings with upwards fo 60-70 layout tabs in them and the preview is annoying and is causing some issues. I can't seem to find the system variable to trun it off.
View 8 Replies View RelatedWe draw several instances of the same base object, a box for example. Different boxes have different features to plot on different layouts. For example, on one of the boxes we dimension lengths, on another we might show levels or elevations. We have multiple layouts based upon the number of unique features we need to plot. Then we batch plot those layouts to a single pdf file with multiple pages.
We do not plot to a scale, we just use dynamic zoom to make the layout look good.
Once that first layout is set, I want another layout with the second box, then a third and fourth etc.
How do I get the new layout with the second box to match the first one? I want the second box to be in the same position and be the same size as it is in the first layout.
For some reason PSE9 photomail will stop working at the Stationary and layout wizard screen. This seems to have happen just recenctly after a download of PowerDirector.
View 1 Replies View RelatedI have this complex section of an architectural project, which is drawn at 1:1 scale (obviously). It has lots of constructive details, however i've made lots of layers and everything is under control.However, as I started to hatch the drawings, i was having big problems at using the same drawing for different scales, because non-annotative hatches also change their size with different scales.
So I began trying annotative, and i did it as i read in several how-tos. I made an hatch in the layout to know the perfect scale for the hatch, then applied that scale in model hatches. Then, in properties, I selected the scales at which that hatch should belong. Until here everything was OK!
However, as the ideal scale for the hatches (ANSI31) was something like 0.0003, here started the problems. The layout has an erratic behavior with similar hatches (I even tried to use match props to be sure different hatches had the same properties). On different viewports, some of the hatches appear as solid, and they plot just like that! As I zoom in and zoom out, the problem changes, as problematic viewports become right and others become wrong.
I tried to change HPmaxlines to 10000000, i tried to change the size of ansi31 in acad.pat, however the problem persists. It seems that the problem disappears when i have increase the hatch scale to, lets say, 0.05, however it's not that scale I want because of the presentation...
I have created a viewport on a drawing within a layout tab. When I go into paper space the available scale options are in metric units e.g. 1:500. When selecting the scale that I require that should allow the drawing detail to fit within the viewport it is too large even when the smallest scale available (1:5000) should easily be adequate for the detail to fit within the viewport. The detail within model space has been drawn in millimetres.
I guess that some defaults, scaling options are conflicting with each other.
If I open the drawing and then run the publish command the Status shows "No errors". If the file is not opened and I use the add sheets button to add the exact same file, it shows an error in the Status of "Layout not initialized".
View 3 Replies View RelatedIs there anyway to link a field text from one layout to another layout? I need something that when I change a title to one layout the other layouts will change automatically.
View 9 Replies View RelatedPertaining to the title. I somehow did something which has caused my model/layout tabs to disappear! How do do I get them back?
View 2 Replies View RelatedIf I can convert or extract a flat sheet layout from a 3D cylinder. I would like to provide a 3rd. party Laser Cutting shop with a flat layout to cut my cylinder walls from.
View 7 Replies View RelatedSo everytime I import a layout from my template, the scale comes out wrong. The border is way too big, viewport, and the stamp is also way to big. It's being scaled by approximately by 12.28 times.
Here's what I can share:
- both drawings are in inches in both files
- all that 'insunits' stuff is set to zero in both files
- 'measurement' and 'measureinit' is set to zero in both files
- using AutoCAD 2012
- xyz scale is all at 1.00
- the titleblock itself almost imports correctly, only some of my att text doesn't come out properly as well.
As far as i can tell it's the command 'from template' issue. Because when i cut and paste the templates layout contents, it comes out fine.
We have just upgraded from 2009 to 2012. Also have merged with a New company that did use xrefernces for there title blocks and we did, and now i am trying to solve how to use there borders to create new page layouts.
Our page setups that we had in 2009 were created by a former employee that is longer with the company.
How we typically started a border/ sheet. We have a separate drawing file that has in model space a 24x36 border with our info that we want repeated on all our sheets.
Now that we are in 2012; The layout tap is a weird size and the 'layout black area' does not match when I import that 24x36 boarder file. The black area does not line up with "0,0,0" and that is what I and trying to figure out how to i make the black area of the layout start at 0,0,0 and be 24x36.
the picture i attached shows 0,0,0 and the 2 borders over layed.
the green box is 24x36.
the blue box is the new border which is ment to be sent within the 24x36 and the brownish red box is the old border and layout and what we used to use.
I have a drawing file with lots of layouts, some of which have multiple viewports. I want to create a new layer and use it in just a few viewports. Is there a way to set the default vpfreeze setting to frozen for new layers? That way I can just thaw it in a few viewports instead of trying to vpfreeze it in a lot.
LT, C3D 2005 - 2014
XP, Vista, 7
How to show a set of particular layers in each layout?
I’m wondering if there is a way to turn off particular layers in a layout without affecting other layouts.
For example, in the screenshots below, if I need to show only “1_walls” layer in the layout “p_04” but to keep all other layers turned on in other lay outs, then how can perform this?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Receive a lot of plans from other guys. I can watch them but when I want to plot I have to change the plotter for every layout. Isn't it possible to change the plotter of ALL layouts in one command? That would be easy!
View 6 Replies View Related