AutoCAD 2010 :: How To Duplicate Layout Properties
Jun 18, 2012
We draw several instances of the same base object, a box for example. Different boxes have different features to plot on different layouts. For example, on one of the boxes we dimension lengths, on another we might show levels or elevations. We have multiple layouts based upon the number of unique features we need to plot. Then we batch plot those layouts to a single pdf file with multiple pages.
We do not plot to a scale, we just use dynamic zoom to make the layout look good.
Once that first layout is set, I want another layout with the second box, then a third and fourth etc.
How do I get the new layout with the second box to match the first one? I want the second box to be in the same position and be the same size as it is in the first layout.
View 3 Replies
ADVERTISEMENT
Jul 10, 2012
When I select any object, my quick properties tab is blank and my properties tab doesn't register anything. Also, I get an error message when I go into my CUI to try to modify the quick properties tab. Pretty frustrating. I've attached a couple of images for reference. I've repaired, re-installed and unistalled and re-installed and still have the same probelm.
Dell Precision T3500
Intel(R) Xeon(R) CPU W3530 @2.8GHz
ATI FIrePRo V5800 (FireGL V)
12 GB Ram
64 BIt OS
View 3 Replies
View Related
Nov 8, 2006
How do you edit the scale property in a polyline layout viewport? I have a polyline layout viewport in Autocad LT 2002 that was created in full version of autocad 2000. Normally in 2002 Lt you can edit the scale properties in a layout viewport, but this is not available when I view the properties of the inserted polyline layout viewport. is there a way of changing the scale in either AutoCAD 2002LT or AutoCAD 2000 (full version)of this polyling layout viewport?
View 5 Replies
View Related
Nov 12, 2012
I'm doing dimensions on Layout and I'm facing a problem: Using the same configurations of dimensions, sometimes I get the right dimension, but sometimes, without changing any configurations, I get wrong dimensions.
At the same drawing, with the same configurations, I get different dimensions to the same line. The only way that I'm being able to correct it is by using Match Properties (from a correct dimension to the one that went wrong).
View 9 Replies
View Related
May 16, 2012
Where the properties browser settings are located so that I can turn the browser on for modifying parameter keys in factory layout? I actually had turned this browser on before, but now I cannot remember where they were. Please see the attachment for further info.
View 9 Replies
View Related
Mar 13, 2012
Is there a way to duplicate in place? I have a instance where I am using a lot of subtractions and I want to have multiple copies of objects in the exact same position. I am finding that when I do copy I often snap to the object but the direction for depth relative to the view I am in ends up being different. Example being I have a 2" Diameter circle extrude that I want to be 120" long. I created that. I want a copy of it in the same position. I am looking from the front so all I see is the circle. I select copy and grab the center point and snap to the centerpoint. Now I have its zero at the other's 120" mark. I am hoping I could just run a duplicate command, but I cannot seem to find that.
View 3 Replies
View Related
Jul 13, 2013
My menu bar has duplicates of some items such as "edit", "view", etc. How can I access it to remove these duplicates?
View 6 Replies
View Related
Mar 28, 2012
I have hundreds of drawings with attributes that are duplicated. I can't go through each individual drawing, call up BATTMAN and delete them one by one. I need a way to automate the process. The duplicates always show up in EATTE and show up most of the time in BATTMAN. I need a lisp that will find and delete duplicates shown in RED while leaving the originals intact.
View 6 Replies
View Related
Sep 19, 2012
I wanted to know if their was an easier way to make duplicate shapes on a drawing. I am doing a survey plat and need to make at least 66 circles with a 2.5 radius on each corner of the lot. Using copy on autocad does not work since it will place the circles off center.
View 7 Replies
View Related
May 2, 2012
When I create a new document in AutoCAD, I get a weird gap of space right above my command bar that either displays a duplicate of the command bar or just blank white space. It is as if the comupter does not recognize it as part of the screen. My mouse will jump over the bar and I cannot type or select anything inside it.
View 3 Replies
View Related
Apr 30, 2013
I have determined that an AutoCAD drawing has the unfortunate ability to have Annotation Scales "hard coded", meaning they CANNOT be removed from the drawing.
Let me explain....
In a detail drawing file (i.e. my master drawing file where I keep all of our standard details), I was getting duplicate Annotation Scales. I would try to use the SCALELISTEDIT command to try and delete the anno scales not being used, but it would appear they WERE being used. (and resetting the anno scales didn't work either)
I was using a combination of tricks to determine WHICH annotation objects were using the duplicate anno scales. I would set ANNOALLVISIBLE to 0 and set the CANNOSCALE to the duplicate anno style to see where they were being used with no luck
I would then use the QSELECT command to group select each type of annotation object that were annotative, and check to see if they were using the duplicate scales. Again, no luck
THEN, I decided to cut-n-paste each detail one-at-a-time from my master drawing file to a new BLANK drawing with only one annotation scale in it (i.e. 1:1). I would paste a detail, and then enter the SCALELISTEDIT command to see which anno scales "came along for the ride". I pasted a particular detail that carried over the duplicate anno scales, but when I checked all of the annotation objects for the duplicate anno scales - NOTHING! I then deleted that particular detail, purged it, and then I was able to delete the duplicate anno scales. But no matter what I did to try and fix that detail (i.e. wblock, cut-n-paste, save-down, etc) the duplicate anno scales simply will NOT be allowed to be deleted even though i cannot find any objects associated with them.
View 8 Replies
View Related
Feb 15, 2012
What's the best method to import layers and their properties form one dwg to another?
I tried layer states manager by import .las file but it only imports the names and not the colors and linetypes.
2013 Civil 3D
View 2 Replies
View Related
Jun 28, 2013
I've seen it's possible to match a property from one drawing into other using the same command. It's necessary to set something else?
View 1 Replies
View Related
Apr 7, 2013
I am trying to plot a paper space as JPG, the drawing scale is 1:1 the paper is the size an a4 page, I tried using the publish to web JPG.pc3 but the lines come out as gray and faint, I tried all the different combination of pixels and scale but without success!
View 5 Replies
View Related
Jun 20, 2012
I have a drawing with a 40 layout tab, so i need to separate all this layout tab in separate drawing, i try save as layout drawing but the layout goes into the model space, i need still in the layout tab.
I want to know if there's a command or an LSP to separate all the layout tabs?
View 3 Replies
View Related
Apr 25, 2012
I have a layout with four viewports in different scales.
When I select one viewport and turn a layer off, all the others viewports turns the same layer off.
Thesame happens when I turn on/off the Freese-button.
View 1 Replies
View Related
Jan 3, 2013
Mirrored blocks with annotative attributes, I know I can scale each one individually, but there are over one hundred. It would be nice to use the properties box and type in the scale. As soon as I type in the "x" scale, y and z follow! I need to put in negatives in x only.
Why do y and z automatically follow x?!?!?
View 6 Replies
View Related
Feb 23, 2012
Same hatch properties but different result! How come?
In the screenshots below, I got a hatch of the same properties, but the output in the screen is different!
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 9 Replies
View Related
Nov 23, 2012
I use Quick Properties in static mode mostly for counting objects and quickly seeing the length of lines and polylines. These lengths are listed in feet and inches. Would it be possible to add an additional length item to the quick properties menu which shows the inches/decimal length? Would be awesome as I wouldn't then have to do the math to convert to inches.
View 3 Replies
View Related
Jul 20, 2011
I have noticed that "Data Extraction" does not give you geometry information of a 3D solid such as position X, Y, and Z, and Length, Width, and Height. This information IS available in "Properties". Is there a way to extract this info to csv or some other format?
View 6 Replies
View Related
Aug 29, 2011
My quick properties pick box came on for no reason. i have turned them off everywhere i can think of but it will not go away. i do not want the hovering QP to ever come on, how can i make sure this doesn't happen.
View 9 Replies
View Related
Sep 6, 2012
It took me a long time & effort to add all 190 custom sheet set properties (Our Frame/template is complex). When i found out that I could not re-order the sheet set custom properties I was really pleased.
My problem;
I'm trying to add a FIELD with some of the sheet set custom properties. Why are the field not seing ANY of the 190 properties I added to my sheet set? see picture
I really love all of thoses fancy new feature Autodesk add year after year, I mean, you know, NURBS modeling & stuff... Trully great work Autodesk!
View 6 Replies
View Related
Jan 24, 2012
I'm trying to figure out two things that have changed:
1) Lets say i create a polyline, lets say its 15 inches long. I used to be able to click on it and have the length show up in my properties. it no longer does that.
2) Lets say i create a polyline, it's green and has a dot pattern. I decided i wanted to change it to yellow and hidden pattern. I can no longer select the line and change it under the properties, it will change it in properties, but not on my screen. then when i draw a new line it will be yellow and hidden. I end up having to matchprop to make it work.
View 9 Replies
View Related
Sep 20, 2013
is there a way to delete extra colors from the properties tab?
AutoCAD 2012LT
View 5 Replies
View Related
Apr 23, 2012
How to do the Properties window customization as shown in my attachment.
View 1 Replies
View Related
Jul 13, 2012
why is it when i open excel and run document properties, i input information into "Author", "Title" and "Subject", if i am in Detail view in windows explorer, and i have these columns visible, they show right up. But when i run DWGPROPS in autocad and i input information into "Author", "Title" and "Subject", they do not show up?
windows 7
excel 2007
autocad 2012
View 2 Replies
View Related
Oct 21, 2013
We have a problem with AutoCAD R2011. The drafter made a rectangle, put some M Text in it, and when he looked at the layout the text does not show up. It's on a visible layer, and when he takes some existing text and sticks it in the rectangle, it works fine. We are just using "MatchProp" to work around the problem. Is there a way to "globally" set the text properties of the drawing to those of a particular instance of text?
View 3 Replies
View Related
Mar 11, 2012
How to modify the settings of more than one layout in one go?
I wanted to choose the same printer for many layouts but I found out that I need to modify them one by one.
Some of these layouts have “Adobe pdf converter”, others have the “DWG TO PDF.pc3”. What I need is to set the printer “DWG TO PDF.pc3” for all the layouts in one go.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 7 Replies
View Related
Feb 15, 2012
I am having an issue with a 3D drawing (xref) with size very large and crashing due to lack of memory. I want to compress it into a 2D layout. How do I compress a 3D drawing into a 2D drawing or something much smaller than the 47 MB it is now?
View 3 Replies
View Related
Feb 17, 2013
I am new user in AutoCAD 2011.The situation is:How can I output to PDF when one Layout with many drawing?
I know how to output to PDF when one Layout with just one drawing(use Page setup + Publish), any many Layout one of them just with one drawing.the attachment will show you the 2 situations
1) one Layout with many drawing
2) one Layout with one drawing
View 5 Replies
View Related
May 21, 2010
I received a drawing that has a layout with multiple mviews in it. There is a light grey grid showing in the layout, that I can't make disappear. Grid on / off command has no effect. Really it doesn't matter if the grid is showing, but it's so annoying! Creating a new layout would fix the problem, but is there an easier way to get rid of the grid?
View 9 Replies
View Related