I want to move a few snap points on a line but not all of them... Usually I would shift + click each individual snap point and then move but when I have a lot of points it gets pretty time consuming.
If there was a way to drag select multiple snap points in a line.
In 2010, I thought I remember the grid snap would automatically turn off when I was in a command for selecting stuff, then after completing my selection, the grid snap would automatically turn back on. For instance, if I wanted to isolate a layer, with grid snap on and set to 1/2x1/2", the object I would try to select would be in the middle of all the grid points and my curser would just jump around it. I'd have to F9 to turn off grid snap, then turn it back on when I was done selecting.
View 3 Replies View RelatedI am trying to use the DIVIDE command but can't see the points (nodes) it creates after the command is complete. I have the OSNAP setting on to snap to nodes which I can't even see. The QSELECT command let me see that they are indeed in the drawing, and that is the only way I can select them.
View 1 Replies View RelatedI'm messing around with some commands and I'm currently exploring laylockfadectl/layiso.
They both work just fine of course, but I was wondering if its possible to make ACAD ignore snap points on the locked layers?
Is there a special snap setting to snap to a point/node? I'm not talking about a endpoint or midpoint or anything like that. I mean a "node" that is set with the "POINT" command. I can't snap to any nodes I create.
View 3 Replies View RelatedThis problem has just started to occur and frankly, I'm totally stuck. When I created 3d objects to represents conduits runs in a building, they worked fine. However, when I saved and reopened my file, the objects are shown in different locations, yet their snap points (endpoints, midpoints, arcs, etc) are shown in the correct location. I have attached an image showing what I mean to clarify. I am using Autocad 2014 and Civil 3D 2014.
View 1 Replies View RelatedUsing AutoCAD Civil 3D 2013, now installing Service Pack 1 (kept crashing, this time it's working though), and I'm trying to find the area of a pathway that I've drawn in 2D with standard lines. Using the area tool, I want to find the area of the path, but it arcs around a 180 degree corner. I tried getting a rough estimate of the area by clicking at several points along each of the arcs, but after clicking a point where the arc joins the straight line of the straight section of the path, it literally won't let me click the next point. I can, however, specify the next point as long as it's nowher near the arc. Same goes for the polyline tool.
Just got an error code for the Service Pack installation, too. "A problem prevented the service pack from being installed, contact your administrator. Error 1603"
In my application, users will insert predefined blocks which have simple shapes like rectangle,square or circle.
Users will connect some polyline or lines to the blocks inserted. My task is that blocks must have snap points only on their center so that the polylines must be connected to the block center point not to other points such that midpoints, end points of the edges.
I wonder if there is a way to override snap points of the blocks while other entities' snap points do not change.
While adding a vertex to a survey figure, if I click too near (like within 0.5') a survey point, the new vertex snaps to the survey point and uses its point number as the new vertex. Is there a setting for this snap feature to turn it off or change the tolerance?
View 9 Replies View RelatedOne of the CAD engineer in my office is facing with a new problem. Until two days back she was able to use the "mid between two points" object snap. But recently it dissappeared from the shift+right click short cut menu. method to bring it back to the shortcut menu?
Sunilkumar
Formshore
CALICUT
In previous version you can rotate the UCS around the Z axis by tying UCS Z at the command prompt and then you were prompted to select two points to defin the angle. Now it uses a point at the ucs icon as the first point and only allows me to pick the second point. Is there a way to pick two points to define the UCS angle? I tried setting the UCS Origin to the first point and that did not work.
Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600
I was wondering if there is a way to select specific 3D points out of a point cloud (.pcg). I am new with Autocad and handling of point clouds .
I can think of various things that you might want to do, as in clean up a bit the data or even delete some areas that you are not interested with. additionally, one might want to do some calculations, so selecting points first and the running a list script to use that points can be handy as well.
What might be the cause of a several moment delay when selecting objects and/ or their grip points. It doesn't occur when a command is entered first. The longer a drawing is open the worse it seems to get. Is there any fix or adjustment that can be made?
View 2 Replies View RelatedI upgraded to CS6 (v16) from CS5 and am having trouble with one feature so far. In CS5 I could create objects and move them around the artboard with an indicator that would come up to show me where I wasplacing it. For example a light green indicator would show if the object is centred (with the text 'centred' also visible) or a line extending from this point to the object to indicate how far away it was. Illustrator would also do this for the relative position to other objects as well as the edges of the artboard which made aligning things very easy.
These indicators have disappeared in CS6 and I can't seem to get them back even when using different align options. How can I get this to return in my copy of Illustrator CS6?
Is there a way to create a surface by manually selecting the points instead of creating a point group? I survey stockpiles for a local construction company and calculate volumes for them.
There may be 50 piles on one site and it would be a lot easier to create a surface by selecting the points manually instead of creating so many point groups.
Can you move an object while using another object's snap points?
View 4 Replies View RelatedI have a workflow where I will link a few PSD's and the other designers can modify the PSD files in Photoshop while I'm working on different content in the AI file. This allows us to work simultaneously and be more efficient with time, since my AI edits aren't dependant on them fixing up the images - it works great.
What I really need is to link an AI file and be able to snap to points on it while I'm creating a separate AI file - The linked AI isn't changing much but I need to see any updates made to it so I can adjust my AI accordingly - but it requires precision and I have to be able to snap to points/edges.
I've wanted this since Illustrator 10 and I can't believe there's no possible way to link to an AI or PDF and be able to just snap to the points, obviously AI knows about the points and lines, the linked content scales and is vector based. By default I can see the AI file but it has the "X" over it and all I can snap to are the edges/corners of the box it's placed in. This doesn't work for me and I have a hard time believing I'm the first person in the world to want to do a simultaneous workflow. I don't want to be able to edit the linked AI at all, just snap to its points.
I'm going to connect my AI file to After effect. So I had to create lots of layers in order to edit them seperatly in After effects. But it seems like my amount of layers are too large because AE always crashes (not responding -> Force quit)
So I wanna break some stuff down in multiple AI files, but I don't wanna go and select every layer and delete it. That would take too much time. Is there a way to select the multiple objects in Illustrator and delete that but also its layer its in?
CS6 Extended (not beta version)
Windows 7
I need the anchor points to snap to whatever I have my gridlines and subdivisions set to in preferences along with guides I place. When I make the initial anchor points, they snap, but moving them after that, they don't snap. I see the new snap vector to pixel grid, but for the majority of my projects, that will not be used.
I have snap check marked and snap to all selected. Never had this problem before CS6.
I have tried using the hot grips selection by holding shift, but some of the grips are overlapping and I can only select the top most grip. It is also a slow process because I must click each individual grip that I want to move as a whole. Is there a way of selecting multiple grips at once including grips that are beneath others?
View 1 Replies View Relatedmy copy of photoshop cs5.5 has no "use measurement scale" tab on the ruler tool bar. Is this right?
View 5 Replies View RelatedI can't seem to be able to select multiple points with the marquee. I'm on a mac... Usually you can select a grouped object, switch to point component and grab a whole chunk of points, then move them etc. I can't do this anymore!
View 1 Replies View RelatedI'm using PhotoShop from CS3 and have had a persistent problem with the polygonal lasso tool. Sometimes when I use it, the tool will only give me a few seconds in between mouse clicks to continue selecting. If I don't keep selecting new points (ie, if I leave the cursor hanging on the drawing with the selection still open), the lasso tool will automatically close itself. when I'm trying to do detailed selection work because it doesn't give me time to find the right point to select to before closing the selection over an area that ends up being useless to me.
View 2 Replies View RelatedIs it possible to select entities of multiple layers?
I've looked at... [URL] .....
...and tried the following code.
string[] layerNames = {"1", "2", "3"};TypedValue[] tdv = new TypedValue[(layerNames.Length * 3) + 2];int i = 0;tdv[i++] = new TypedValue((int)DxfCode.Operator, "<or");foreach (string ln in layerNames){ tdv[i] = new TypedValue((int)DxfCode.Operator, "<and"); tdv[i + 1] = new TypedValue((int)DxfCode.LayerName, ln); tdv[i + 2] = new TypedValue((int)DxfCode.Operator, "and>"); i += 3;}tdv[i - 2] = new TypedValue((int)DxfCode.Operator, "or>");SelectionFilter sf = new SelectionFilter(tdv);PromptSelectionResult psr = ed.SelectAll(sf);
This code gives me an error in the PromptSelectionResult.
What would cause the erro?
I'm using QSELECT to select all objects on a layer, sometimes I need to select objects from 5-7 layers.
Right now I use QSELECT, select 1 layer, click OK, open QSELECT again, select another layer and repeat. Is there a faster way to do this without scripts?
I'm sure some of you do site drawings, how do you measure a curve? Some restaurants or cafes have a rounded serving counter, how you measure the radius to plot into autocad?
When I try to select points in my vector shape (this one is selected), and I have other vector shape behind that one, I start dragging with Direct Selection Tool in order to select those two points, I got selected three points, two from first vector shape, and one more form shape that was behind and in the area where I was dragging selection. Also, now both vector shape become selected. Why is this happening if only one vector shape was selected?
I'm using Photoshop CC.
How to modify this routine so that I can select multiple objects as opposed to one at a time?
(Defun c:cd ()
(setq newdim (entsel "
Select Dimension to clear:"))
(setq newdimvalue " ")
(command "dimedit" "n" newdimvalue newdim "")
(princ)
)
Is it possible to emboss multiple elements at once, without selecting each of them separately? I got over 2k elements on sketch which are needed to be embossed, it would be really pain to do it manually.
View 6 Replies View RelatedI just started having an issues with the delete feature. When I click on an object and it highlights it--when i hit the delete button, it doesn't delete the object any more. Also i should be able to click on as many object as i want, now it makes me hold the shift key down. And also when I click on an object then pull the layers tab down to assign it to a diffent layer ---it won't change it now.. what do you think is going on with the software and who might I contact to get this problem corrected.
View 3 Replies View RelatedI have this code that I wrote years ago that I want to update to select two types of civil3d objects and show them selected with grips on the screen. This function works fine
(defun CELFEATURE ()
(ssget "_X" '((0 . "AECC_FEATURE_LINE")))
(setq sset (ssget "P"))
(if sset
(progn
(sssetfirst sset sset)
;(command "_.PROPERTIES")
)
)
)
(defun cF () (CELFEATURE))
but if I add the extra object like this which I assume is the wrong syntax i only get the second type of objects. Need correct syntax I should be using for selecting more than one object in an ssget statement.
(defun CELFEATURE ()
(ssget "_X" '((0 . "AECC_FEATURE_LINE","AECC_AUTO_CORRIDOR_FEATURE_LINE")))
(setq sset (ssget "P"))
(if sset
(progn
(sssetfirst sset sset)
;(command "_.PROPERTIES")
)
)
)
(defun cF () (CELFEATURE))
I am just starting learning lisp, And I am looking for a fast way to select multiple objects (usually circle) and export their coordinates and ID into a excel sheet through lisp programming.
As you might see in the attached drawing, the red circles are objects wanted. I have been trying to export their coordinates as well as their IDs in grids, e.g D28, Easting: Northing: . I still haven't found a good way to export ID for each circle.
As my code doesn't work, I wonder what's the most effective way to detect errors in lisp
