Is there any way that Autocad can have multiple items placed on the clipboard for insertion use like the Microsoft Office Word program has (up to 24 inputs). This would be a good feature to allow going to one file, copying what you need and then switching to your current drawing file and placing them as needed.
View 2 Repliesis there any way that Autocad can have multiple items placed on the clipboard for insertion use like the Microsoft Office Word programme has (up to 24 inputs). This would be a good feature to allow going to one file, copying what you need and then switching to your current drawing file and placing them as needed
View 6 Replies View RelatedI need to quickly obtain a count of all entities on a layer, or preferably multiple layers. In this instance all the entities will be hatches so that should make it a bit easier.
I'm aware I can use quickselect but if there was a routine that would select all hatch entities on screen (multiple layers) and provide a count per layer that would be much quicker.
How do I select multiple items without having to hold down the shift key in ACLT 2013? I didn't have this problem in 2010.
View 3 Replies View RelatedI have Illusrator CS6, and it ask when I close, if I want to save to clipboard. Now the program runs slow. Is there any way to view clipboard and edit and/or delete items that are on it?
View 1 Replies View RelatedI somehow lost the toolbar with the "copy to the clipboard" and "paste from the clipboard" icons.. which tool bar i need to turn back on?
View 2 Replies View RelatedWhenever I select some objects in an AUTOCAD drawing and Press Ctrl+C to copy them for taking it to any other file, it gives error "COPY TO CLIPBOARD FAILED."
However, this error is not for all the files but in some of the files. After much tweaking and researching on my own, I found out that this happens in files in which I have set viewports in LAYOUT. When i delete the entire LAYOUT by right Click + Delete, and then go to MODEL and do Ctrl+C, the copy to clipboard happens in normal way.
Why do I get the error when I have set viewports in LAYOUT ?
when I wanted to copy objects from one drawing to another or even inside of one drawing, I could right click, "Copy with Base Point" . In 2013 (possibly before) they moved that command along with copy, paste into another command called "Clipboard".
I've been searching for a way to customize that to remove that extra click to access a commonly used command with no luck.
You'd think that being able to copy and paste would be a fairly straightforward task in any piece of software. Not in AutoCAD 2013. The Help file says the commands are located on the 'Clipboard' panel, under the 'Home' tab. I've spent a lot of time searching and can't find them, nor can I find any information about how to turn such a panel on.
This is the sort of thing that shouldn't be a problem in a well-designed piece of software. We're finding AutoCAD 2013 to be almost unusable out of the box, and have to spend ages fiddling with the (clunky) Custom User Interface commands to make it work. Every time AutoDesk bring out a new version of AutoCAD it seems to get even worse. I could resort to keyboard commands, but shouldn't have to. I'm starting to think the best solution would be to invest in a copy of Vectorworks instead.
No matter what command i try in autocad (move, erase, copy, etc)..i can only select one item at a time. When i choose one item it goes dashed (as they normally do), but when i click the second item the first one i chose goes back to solid and if i press return only the second item i selected if affected. Similarly if i choose 3 items , it forgets the first two and only keeps the third one.. Is this an Autocad options thing or a windows Mouse thing?
View 8 Replies View RelatedSuddenly I can only select one item at a time. If I move onto another item, the first one de-selects. I haven't knowingly made any changes. What has happened and how to put it right? I can select multiple items via 'click and drag', but only within one drag - another drag then de-selects the first drag again.
View 9 Replies View RelatedI can not remember how you do this QTO seems to only let you pick one object at a time surely there.
is a faster way crossing windows does not seem to work within the command.
A quick way to add a single column to multiple items in the Content Center? The column would be the same across the board, and I really don't want to edit several hundred family tables one at a time if I don't have to.
View 2 Replies View RelatedHow to trim an array? I want to trim out array items as if using a crossing window, not as the trim command does. See attachments. I want to be able to trim as in array 2, not as array 1.
View 9 Replies View RelatedI've recently installed AutoCAD 2014 and am working to get it compatible with my company's internet standards.
There are some features that are not cool with our IT & Security to have enabled in our office.
I'd like to remove these 3 items from the upper right menu. (see attached image).
The items are...
Sign In to Autodesk 360
Autodesk Exchange Apps
Stay Connected
I'm wanting to copy some elements from one drawing to a different .dwg file to make sure it's identical. I can't just simply use the COPY command. At least it didn't work for me.
View 8 Replies View RelatedAny way to automatically fill a blank document with placed items making it multiple up?
A simple example would be a business card that I designed in InDesign. I have the margins, document size and bleed edges set, I would like to place them multiple up on various sizes to see what size would hold the most to trim. 8up typically go on a letter sized document etc. But now many could I fit on 12"x18", etc.
What I am trying to accomplish not having to align each one manually which is slowing my work flow down. Plus when customers have odd sized documents they want cut and padded etc, having the abilitiy for the software to automatically place items that are all alligned by their trim edges would save a lot of proofing and re laying items out.
The idea comes from my Silouette Cameo personal cutting plotter. The software lets you fill the cut area with a design and it is filled equally.
There has to be a way commercial users can do this with out figuring all the math?
My AutoCAD Map 2014 still allows me to select objects and then type the command to, for example, delete the items. I was able to do it in my Civil3d but it seems something was toggled so that I'm no longer able to. Now if I select items, once I select a command, it essentially unselects the objects or doesn't recognize that they are selected.
View 2 Replies View RelatedI don't know about others having drawing that either have DGN trash like linetypes or (Cells) blocks that seem to not purge out even if you use the regular wblock command.
And if you go to purge and toggle "View items you cannot purge" you see them.
You want to clean the drawing and you want to keep all your paperspace tabs so you will end up with a clean drawing.
1) use the command -wblock
2) enter a new name
3) enter * (that will tell Autocad to create a new drawing with everything in it)
4) close the old drawing don't save and open your new clean drawing with all your paperspace tabs, your done!
In Autocad 2013, Is it possible to erase somme items of a rectangular associative array. I have seen that we can replace an object with a different one.
View 8 Replies View RelatedWhether I used the flyout on the ribbon, the CTRL+1 command, or right click on properties in the menu of a selected item, the properties window does not appear. I tried both repairing and reinstalling AutoCAD and neither worked for me.
View 9 Replies View RelatedIs there a way to resize multiple items of different sizes all at once? Say I have five boxes measuring 1", 2", 3", 4" and 5" but i want them all to measure 6", is there a way to resize them all at once?
Mac OS X 10.7.5
Illustrator 16.0.0
i having a fully working ribbon in ACAD2013. it is a registered dll that is originally coded in vb.net.
unfortunatley the functionality is only visible at the drafting & annotation workspace but is desperatly needed in classic workspace mode.
for hours i am trying to find a way to make my functionality working in classic workspace too.
is it possible to extend the classic workspace in acad2013 with my functions? if so, how, or where can i get more detailed information to solve my task.
I am using a MacBook laptop without external mouse and on Maya 2013 I could select multiple outliner items with the CMD + ALT keys. Since Maya 2014, this does not work anymore. how I can multi-select ? (I am not talking about the SHIFT key because my items are not contiguous).
View 8 Replies View RelatedHow can I get width that multiple selected items? (Not grouped.)
//---------- source code ----------
var mm = 2.83464566929134 //unit conversion. (point->milimeter)
var W = docRef.selection[0].width/mm;
alert(W);
//---------- source code ----------
I have script where I select items on multiple artboard but I can't seem to get get active art board of the selected item. Is this possible?
each artboard has a text item and I would like them in the same position on each of their own artboards that they are already one. right now it adjusts them all to one artboard. here is what I have so far
doc = app.activeDocument;
for(i = 0; i < selection.length; i++){
var firstItemPosition = doc.selection[0].position;
doc.selection[i].position = firstItemPosition;
var activeArtboardIndex = doc.artboards.getActiveArtboardIndex();
alert(activeArtboardIndex);
}
I have a small sublimation business whereby I print photo's onto small personalised gifts such as mugs, phone covers fridge magnets. I print out the images to fit the size of the gift i.e. a phone cover or mug the images are a specific size.
Often I want to print multiple items onto one page each with a customised size as the paper is expensive and I need to make the most of every sheet. I can't figure out how to do this in photoshop elements 12. I am using windows XP
I am hoping to link text items between pages and items in the drawing such as elevations?
So, ideally, I would have a front page to my drawing set, and this would have a 'Contents' type table on it, with the title name of each drawing in one column, then the drawing number in the next column. This is the tricky bit, someone must know: If i was to change the name / number of any item in this table, could it change also (linked to) the following items:
Drawing title (as a text idem on the layout sheet that that drawing relates to)
Drawing number (as a text idem on the layout sheet that that drawing relates to)
Elevation call-out (on the plan view)
And possibly:
Excel reference cell
Drawing layout tab title (this might be pushing it!!)
Perhaps this could be done by linking to an external Excel spreadsheet with these titles modified in there? I'm not sure. This would be ideal as typing into excel is a lot easier than the triple click text modify method required currently.
I waste a lot of time renaming and updating sheet names / titles / numbers. Are there standard templates for drawing sets that may have this built in available anywhere that I could try?
I need to scale / tranform 30 - 40 circles from .5 to .25 that are in specifice locations, without moving the circles when scaled. AI CS6
View 9 Replies View Relatednew to dynamic blocks but looking to streamline my wiring diagrams here and have created a block that shows the typical wire styles we use in a simple easy way. I now want to add an overall flip to the entire block and have not been able to find set this. I would prefer to use the same label and go from there. I have included the block to show what I mean. It is only working on the single visible item at the one time. I know this has to be possible just let me know what I am doing wrong. I am running AutoCad LT 2013
View 3 Replies View RelatedI have multiple singular text objects on my screen and I want to convert them to mtext so I can use the Background Mask option within mtext on my drawing. how to quickly select all the text and convert it to mtext without it combinin ginto 1 mtext?
View 9 Replies View Related