Looking how the best way to hatch out lines, equipment being removed on drawings. is it possible to create a linetype so it would be easy to just follow a line that needs hatching, or create a multiline?
View 2 RepliesI am relatively un-practiced using AutoCAD and I am struggling with keeping my drawing in the state it was created. All of my curved lines seem to have moved or doubled so now there are two of the same very close to each other which makes the line width seem heavy. Because my curved lines are not exactly where I created them now it means that my hatching does not sit flush with its boundary. A separate issue is that when I am choosing 'pick points' to hatch, they take a very long time to select before the hatch box appears.
View 4 Replies View RelatedThe lines of hatch are together like a block,but it is not block,what is this kind of format?And is it possible to convert several parallel lines into 'hatch' ?
View 3 Replies View RelatedI face new problem in using solid hatch command ,when I choose poly lines and use hatch some unwanted lines appears inside hatch area which make my shape separate from others part be meant be unify. I am amateur in using auto cad .BTW , my scale is about 5 micron meter and when I export the drawing int pdf all straight lines become curvy .I upload the image which describe itself my problem. URLs...
View 1 Replies View RelatedScren shot attached
I am hatching (a very quick sketch for info) but the hatch lines are going across the ploy line zone.
What happening. I cannot snap to these, but if in put a selection window acorss an of the lines, it will select the hatch.
I dont want to see these and dont want to have to hatch indivual rectangles. Never seen this before.
I cannot see anythign obvious in any of the settings.
We are using a file created by another company and making additions to it for Interiors. While working in this file we have added some new layers and have begun to hatch new walls. While hatching some of these wall my boss received a message saying that the file had errors. He saved and closed the file at that point. When he re-opened the file a number of lines were missing from the file.
They appear to be completely random - i.e. parts of chairs are missing but not the whole chair, parts of walls but not whole walls. The things missing were not all on the same layer and were not necessarily items that had been hatched.
Note - we are running 2012 and the files were created in 2007
I have a problem were when , i take a design accelator shaft to .idw and section it the the hatch lines do not appear as they would if it was a shft drawn from scratch.
View 3 Replies View RelatedI have a problem with a File in Autocad.
We have a dynamic block here at work that has a solid hatch in it. It is a simple block which only utilizes a dropdown menu.
This block is a circle with a solid hatch in it. However when I select the block via dropdown menu, the hatch is not solid, it is a bunch of lines originating from the center of the circle.
I have never had this problem before with this block and nothing has changed with the block.
It also works fine when I open up other drawings.
This tells me that there is a problem with the settings of this specific file but I cannot figure out what setting.
I believe the problem occurred because I brought my work home with me and I have different settings on my autocad (both ACAD 2011).
if i want to make a custom hatch which include with letters and some different types of lines. what is the process to make that type of custom hatches.
View 9 Replies View Relatedi have problem with hatch,if i delete any lines from related hatch protion object area, my all related hatch object erased.pls guide me how to solve problem.
View 6 Replies View RelatedI need a function that allows to convert the polylines selected with a width globalize defined in a double closed line (spaced by the same width of the polyline), with a hatch inserted automatically defined.
Brilliant idea to draw raceways quickly: instead of making handmade double lines, connect, enter the hatches all by hand, you could quickly draw the polyline with width identical to the size of the duct, and then the lisp transform it into a duct more aesthetically pleasing if compared to the full polyline!
You can assign a pen width to the lines of a hatch?
View 3 Replies View RelatedI want to move my horizontal hatch lines so they align with the top of my windows.
View 1 Replies View RelatedI am trying to entmake a hatch entity from a hatch template.
After entget the template hatch entity, i get the followings
Select object: ((-1 . <Entity name: 7ed11b78>) (0 . "HATCH") (330 . <Entity
name: 7efc7c10>) (5 . "737") (100 . "AcDbEntity") (67 . 0) (410 . "Model") (8 .
"SECTION-LABEL") (62 . 255) (100 . "AcDbHatch") (10 0.0 0.0 0.0) (210 0.0 0.0
1.0) (2 . "SOLID") (70 . 1) (71 . 0) (91 . 1) (92 . 1) (93 . 8) (72 . 1) (10
633596.0 5.79713e+006 0.0) (11 633519.0 5.79713e+006 0.0) (72 . 1) (10 633519.0
5.79713e+006 0.0) (11 633519.0 5.79708e+006 0.0) (72 . 1) (10 633519.0
5.79708e+006 0.0) (11 633500.0 5.79708e+006 0.0) (72 . 1) (10 633500.0
[code]....
Now I wrote the following code using the above data as follows
(entmake (list (cons 0 "HATCH") (cons 67 0) (cons 410 "Model") (cons 8 "SECTION-LABEL") (cons 62 255) (cons 10 (list 0.0 0.0 0.0)) (cons 210 (list 0.0 0.0 1.0)) (cons 2 "SOLID") (cons 70 1) (cons 71 0) (cons 91 1) (cons 92 1) (cons 93 8) (cons 72 1) (cons 10 pt1) (cons 11 pt2) (cons 72 1) (cons 10 pt2) (cons 11 pt3) (cons 72 1) (cons 10 pt3) (cons 11 pt4) (cons 72 1) (cons 10 pt4) (cons 11 pt5) (cons 72 1) (cons 10 pt5) (cons 11 pt6) (cons 72 1) (cons 10 pt6) (cons 11 pt7) (cons 72 1) (cons 10 pt7) (cons 11 pt8) (cons 72 1) (cons 10 pt8) (cons 11 pt1) (cons 97 0) (cons 75 0) (cons 76 1) (cons 98 1) (cons 10 (list 0.0 0.0 0.0)) (cons 450 0) (cons 451 0) (cons 460 0.0) (cons 461 0.0) (cons 452 1) (cons 462 1.0) (cons 453 2) (cons 463 0.0) (cons 63 5) (cons 421 255) (cons 463 1.0) (cons 63 7) (cons 470 "LINEAR")))
The point variables pt1, pt2....pt8 are all defined. But when I run the code the hatch is not being created? Why?
I have a hatch (ANSI31) enclosed by a closed polyline. Whenever I change the hatch from ANSI31 to GRAVEL some of the hatch shows up outside the boundary. The Polyline consists of both arcs and line segments, and the hatching errors are occurring within the radius of the arc segments. Changing it from Associative to Non Associative makes no change.
I am using AutoCAD 2011.
I am in need of a lisp routine which will automatically pick up all hatch and solid hatch patterns within a drawing and change the colour to colour 254.
View 9 Replies View RelatedIt is no more possible open Hatch Edit dialog with double click on existing hatch. Now, this way opens only Properties
View 9 Replies View RelatedJust downloaded Autocad 2013 and am missing quite a few of the standard hatches (siding, soldier, board and batten, etc.) What should I do to get them back. When I open old drawings with these hatches in them, they load just fine...but I am unable to hatch any new areas with these hatches (because they are not listed in the hatch library)
View 9 Replies View RelatedI want to be able to add a Block Reference to a hatch. I'm adding the block reference to an ObjectIdCollection and the hatch is not taking it when using AddLoop().
So I thought maybe I needed to add the location of the polyline (curve-like) object that is member of the blockreference to the hatch, but I don't know how to get its ObjectId.
Hatch thisHatch = new Hatch();thisHatch.Layer = layerName;thisHatch.SetDatabaseDefaults();thisHatch.SetHatchPattern(patternType, patterName);thisHatch.Color = Color.FromColorIndex(ColorMethod.ByColor, colorIndex);thisHatch.Transparency = new Transparency((Byte)(255 * (100 - 60) / 100));tSpace.AppendEntity(thisHatch);transaction.AddNewlyCreatedDBObject(thisHatch, [code]........
Also, I'm trying to delete certain HatchLoop that is associated to a polyline but I don't know how to do it. I'm going through the loops in the hatch but I don't know what to do there. I wanna do this so I create a new and different hatch on top.
I think one could also copy all the loops except the one one wants to delete, but I'm not sure how to tell which one is the one I want to delete that is the one associated to a polyline or that is in certain region.
I have AUTOCAD LT 2012 - windows 7 - SP1
Neither the button for Hatching or the Draw Hatch menu do not activate the HATCH DIALOG BOX?
This means I cannot Hatch?
I have also added the Hotfix for the Ribbon and it made no difference.
I've migrated from 2005 to 2014 LT and wondered if they have added to the hatch commands. I've looked and haven't found anything. Is there a command that you can pick a hatch pattern already shown on the drawing and make that pattern the existing one to use? I sometimes have multiple hatch patterns and scales, and wanted a quick way to go from one to another without lisp help.
View 3 Replies View RelatedWhy is my hatch off set from what I want to hatch? I pic the points of the area in 3d i want to hatch but it ends up hatching out of the points i select?
View 5 Replies View RelatedRe: 2D circle jagged lines, 3D model hidden jagged lines. How do i get smooth lines?
How do i get rid of jagged lines?
Circles and diagonal lines look rubbish when i am in hidden view which i use for simple 3d black / white (i think this is the best way?).
I have tried:
- viewres (1000, 5000, 10000, 20000 sightly better)
- regen
See examples.
square with jagged lines.fw.pngcircle with fuzzy outline.fw.png
how do I make straight lines? Horizontal Lines? Vertical Lines? Curvs? I read many tutorials and i am afraid that I am doing it the wrong way, my way is to drag a guide to where i want the line to be at and trace the guide with the brush tool...
View 2 Replies View RelatedWith all of you fine teachers, I have the know-how to get the start and end values of a line.
Do you think there is a way to get a point returned that represents the true intersection of the two lines, without having to involke a user defined "getpoint" function using "intersect" osnap?
Why I can't set the hidden lines viewbase option to shaded with visible lines mode?
View 9 Replies View Relatedi am doing a simple project making a survey plot for a piece of land that will be broken into subdivision. all measurements are of my starting point. after plotting the starting point i try to draw line that is 113 feet long and at a bearing of N 5d W i have no problem entering this data but when i hit enter it draws a straight line. now i know 5 degrees is much of an angle so i thought maybe it just looked straight and tried to plot the next point which was 542 feet from the last point at a bearing of N 39d E but once again after i put the info in and hit enter or space it would plot a line of the proper length but vertical, not the proper angle i need it at. here is how i would put in the info:
first i choose the lne command and choose my "beginning point" as that starting point for my line then i type 113<N 5d W for the length and direction and hit enter. when i do this it plots a vertical line of the proper length but wrong angle. what am i doing wrong? i have ortho set to off and idk what else to mess with
I was trying for an option with wipeout mask.
Is there any option with wipeout to turn the continuous lines into dotted lines instead of hiding the object? I have been working on one staircase block, i want to show half block as a dotted lines.. is there any way to do that without going in to the block edit and change? thats why am looking for wipeout mask option.
what I have to do, in AutoCAD, to make two center lines to intersect on lines and not on free spaces.
View 9 Replies View RelatedI know there is ipn file to create an exploded view. But if I have used a positional rep to create one. How can I automatically show the tweak lines or center lines on explode path
Inventor Professional 2013
Vault Collaboration 2013
I have selected several lines (not pl or spl), just lines, all of which are the same layer and such. I want to be able to select all thirty or forty of the lines using either the select similar (lisp, AC2010) or quick select and return a total length of all of the selected lines. In the properties box it shows as varies.
View 2 Replies View Related