I am relatively un-practiced using AutoCAD and I am struggling with keeping my drawing in the state it was created. All of my curved lines seem to have moved or doubled so now there are two of the same very close to each other which makes the line width seem heavy. Because my curved lines are not exactly where I created them now it means that my hatching does not sit flush with its boundary. A separate issue is that when I am choosing 'pick points' to hatch, they take a very long time to select before the hatch box appears.
Looking how the best way to hatch out lines, equipment being removed on drawings. is it possible to create a linetype so it would be easy to just follow a line that needs hatching, or create a multiline?
The lines of hatch are together like a block,but it is not block,what is this kind of format?And is it possible to convert several parallel lines into 'hatch' ?
I face new problem in using solid hatch command ,when I choose poly lines and use hatch some unwanted lines appears inside hatch area which make my shape separate from others part be meant be unify. I am amateur in using auto cad .BTW , my scale is about 5 micron meter and when I export the drawing int pdf all straight lines become curvy .I upload the image which describe itself my problem. URLs...
We are using a file created by another company and making additions to it for Interiors. While working in this file we have added some new layers and have begun to hatch new walls. While hatching some of these wall my boss received a message saying that the file had errors. He saved and closed the file at that point. When he re-opened the file a number of lines were missing from the file.
They appear to be completely random - i.e. parts of chairs are missing but not the whole chair, parts of walls but not whole walls. The things missing were not all on the same layer and were not necessarily items that had been hatched.
Note - we are running 2012 and the files were created in 2007
I have a problem were when , i take a design accelator shaft to .idw and section it the the hatch lines do not appear as they would if it was a shft drawn from scratch.
We have a dynamic block here at work that has a solid hatch in it. It is a simple block which only utilizes a dropdown menu.
This block is a circle with a solid hatch in it. However when I select the block via dropdown menu, the hatch is not solid, it is a bunch of lines originating from the center of the circle.
I have never had this problem before with this block and nothing has changed with the block.
It also works fine when I open up other drawings.
This tells me that there is a problem with the settings of this specific file but I cannot figure out what setting.
I believe the problem occurred because I brought my work home with me and I have different settings on my autocad (both ACAD 2011).
if i want to make a custom hatch which include with letters and some different types of lines. what is the process to make that type of custom hatches.
i have problem with hatch,if i delete any lines from related hatch protion object area, my all related hatch object erased.pls guide me how to solve problem.
I need a function that allows to convert the polylines selected with a width globalize defined in a double closed line (spaced by the same width of the polyline), with a hatch inserted automatically defined.
Brilliant idea to draw raceways quickly: instead of making handmade double lines, connect, enter the hatches all by hand, you could quickly draw the polyline with width identical to the size of the duct, and then the lisp transform it into a duct more aesthetically pleasing if compared to the full polyline!
I have CS2 running on XP with a Wacom tablet. The cursor in Photoshop (and perhaps other apps) is doubled (i.e., there are two of them on the screen about 3/4 inch apart). Do I need to reset preferences?
I recently upgraded from cs5 to cloud and all of my psd / psb files have doubled in size. I thought it might have something to do with the sync to the cloud, but I don't believe this to be the case. I messed around with the file handling section under preferences but nothing has really made any difference.
I've been transferring a lot of old vidoes from analog tape to digital video. All video files have been created as H.264 640x480 mp4 with Elgato Video Capture. And all video-files display fine in, VLC, Media Player Classic, Quicktime and even iMovie. Some of these import fine into Premiere CS5.5 without problem, but some end up looking green, distorted and doubled, like this:
I've tried to Interpret Footage on the broken clips, setting the framerate to a constant like 25fps. But this seems to have no effect.When I try to import the same file into After Effects CS5.5, I get this error: after effects error: overflow converting ratio denominators 17::18..I've crosschecked two video files against each other to find some differences, but there is none, as far as I can see.
I downloaded a hose fitting ipt file from the Parker website and did the Tube and Pipe Authoring thing to put it into the content center as a new family in a new read/write library. When I browse for it to use as the Start Fitting on my hose, the new family does not appear in the list. What is my problem?
The new library is checked in my Projects configuration. I have been monkeying with the NS column of the family and can't seem to get it back to its original format now.
I have a hatch (ANSI31) enclosed by a closed polyline. Whenever I change the hatch from ANSI31 to GRAVEL some of the hatch shows up outside the boundary. The Polyline consists of both arcs and line segments, and the hatching errors are occurring within the radius of the arc segments. Changing it from Associative to Non Associative makes no change.
I am in need of a lisp routine which will automatically pick up all hatch and solid hatch patterns within a drawing and change the colour to colour 254.
Just downloaded Autocad 2013 and am missing quite a few of the standard hatches (siding, soldier, board and batten, etc.) What should I do to get them back. When I open old drawings with these hatches in them, they load just fine...but I am unable to hatch any new areas with these hatches (because they are not listed in the hatch library)
I want to be able to add a Block Reference to a hatch. I'm adding the block reference to an ObjectIdCollection and the hatch is not taking it when using AddLoop().
So I thought maybe I needed to add the location of the polyline (curve-like) object that is member of the blockreference to the hatch, but I don't know how to get its ObjectId.
Also, I'm trying to delete certain HatchLoop that is associated to a polyline but I don't know how to do it. I'm going through the loops in the hatch but I don't know what to do there. I wanna do this so I create a new and different hatch on top.
I think one could also copy all the loops except the one one wants to delete, but I'm not sure how to tell which one is the one I want to delete that is the one associated to a polyline or that is in certain region.
I have a sinusoidal curve, that I've created using a third party app, which has worked really well. But the app only produces the form in a straight line and i now need to fit it to a number of curves.
I have a form of 3 radii and a couple of flats, which the sinusoidal form needs to fit along. All this work is just in 2D as i need to output the dxf into a CNC machine.
I am trying to add geometry programatically to a duct fitting. This is because the content builder is incapable of correctly building some types of fittings. I found some old code from an Autodesk University class that shows how to add geometry to a AEC object. I have modified it a little to be able to work with a duct fitting but it does not work. The code compiles fine and runs fine without any errors. The geometry is just not added.
[CommandMethod("ACAClassCode", "ExModelerModifyBody", CommandFlags.Modal)] public void ModifyBody() { Database db = HostApplicationServices.WorkingDatabase; Editor ed =
I've just got AutoCAD 2012 and mkaing some rings, I needed to fit the same textures of a ring of 8mm in a 6mm ring. My problem is that the inside diameter is larger in the 6mm ring, and that's why I can't use the Scale command. Is there a command that allows me to fit all the objects in this area??
