I have CS2 running on XP with a Wacom tablet. The cursor in Photoshop (and perhaps other apps) is doubled (i.e., there are two of them on the screen about 3/4 inch apart). Do I need to reset preferences?
View 1 RepliesIn addition to no icon showing the type of cursor (Standard or Precise) w/in PSE some cursors diplay as tripple symbols of the selected tool. For example, if the Crop tool is selected three pictures of the Crop tool display as the cursor. I have tried the Control-Alt-Shift reset w/o success.
View 1 Replies View RelatedCursor Icon meanings
What is the significance of the changes to the cursor in the following circumstances:-
1.In timeline the 4 headed arrow changes to a white pointer just above the timeline with a small icon behind it and the timecode shows
2.When moved to the ruler, it changes to a double headed arrow with another icon next to it
I recently upgraded from cs5 to cloud and all of my psd / psb files have doubled in size. I thought it might have something to do with the sync to the cloud, but I don't believe this to be the case. I messed around with the file handling section under preferences but nothing has really made any difference.
View 1 Replies View RelatedWhen sending ai drawings out to be machined, the shop is telling me that the lines are doubled.
View 4 Replies View RelatedI am relatively un-practiced using AutoCAD and I am struggling with keeping my drawing in the state it was created. All of my curved lines seem to have moved or doubled so now there are two of the same very close to each other which makes the line width seem heavy. Because my curved lines are not exactly where I created them now it means that my hatching does not sit flush with its boundary. A separate issue is that when I am choosing 'pick points' to hatch, they take a very long time to select before the hatch box appears.
View 4 Replies View RelatedI've been transferring a lot of old vidoes from analog tape to digital video. All video files have been created as H.264 640x480 mp4 with Elgato Video Capture. And all video-files display fine in, VLC, Media Player Classic, Quicktime and even iMovie. Some of these import fine into Premiere CS5.5 without problem, but some end up looking green, distorted and doubled, like this:
I've tried to Interpret Footage on the broken clips, setting the framerate to a constant like 25fps. But this seems to have no effect.When I try to import the same file into After Effects CS5.5, I get this error: after effects error: overflow converting ratio denominators 17::18..I've crosschecked two video files against each other to find some differences, but there is none, as far as I can see.
When I loaded some photo actions into my new PSE11 it show only a generic icon in the effects palette, not the icon from the maker so it takes extra time to search for the action I need. How can I get the icon from the maker to show as the icon in the palette?
View 3 Replies View Relatedwhy does the update icon always stay on the photoshop 10 icon on my desktop?
View 3 Replies View RelatedI need to convert a PNG image to an icon in Windows icon format.Can I do that in XDP7?
View 9 Replies View RelatedMy cursor appears and disappears while in GIMP as I move the cursor over the canvas. I can make the cursor appear but only if there is no movement of the cursor. It makes no difference which tool I select, the size of the canvas, or the level of zoom.
Please note that this only occurs in Gimp, and none of my other applications. It started when I upgraded from openSUSE 12.1 to 12.2. I'm assuming that it has something to do with my input device configuration, but I could be totally wrong.
I have a total of 3 input devices - Core Pointer, Logitech USB-PS/2 Optical Mouse, and Virtual Core XTEST Pointer. Both the Optical Mouse and XTEST Pointer are DISABLED. Core Pointer is the only one enabled. Enabling Optical Mouse and XTEST Pointer give me other problems in Gimp and need to remain disabled.
For the Core Pointer, Mode is set to SCREEN, a message says that 'The axis X has no curve', and the following Axis Settings:
X 1
Y 2
Pressure none
xtilt none
ytilt none
wheel none
In Gimp Preferences->Input Controllers, there are three active controllers - Mouse Buttons, Main Mouse Wheel, and Main Keyboard.
OS: Linux 3.4.11-2.16-desktop i686
System: openSUSE 12.2 (i586)
KDE: 4.8.5 (4.8.5) "release 2"
Display Info:
Vendor: Intel Corporation
Model: G33
2D driver: intel
3D driver: Unknown Gallium (9.0.1)
In Xcode, we have to define cursor as:
Â
resource 'CURS' (16001) {
   $"00 00 00 00"
   $"18 00 3C 00"
   $"1E 00 0F 00"
   $"07 80 03 C8"
   $"01 E8 00 FC"
[Code]...
Â
In Windows we use .cur file, simpler.
Â
I want to convert .cur file to the mac format above, how?
Photoshop CS3 and have stumbled across a bit of a problem. It seems that I have managed to lock my Photoshop file from all editing as I am unable to use any tool apart from the Hand Tool.
View 6 Replies View Relatedhow to prevent photoshop from automatically changing cursors from BRUSH SIZE to the precise?.
I've tried the reset but it does not work.
i downloaded the trial version of Photoshop CS4, and as soon as i installed it i had this problem. when i use the tablet, it would be fine and prefectly responsive however, if i walk away from the laptop for about 20secs or more, i just cant seem to get any response on photoshop when i use the tableti am not sure what is the real cause of the problem but its a constant annoyance, and the only way i can solve it, is to exit photoshop, and start it up again.only to have the same thing occur if i pause to do something else or alt+tab to check my email or whatever... i can confirm that theres nothing wrong with my tablet as it works for my other programs like Manga Studio EX or MS paint(lol)so i have NO idea why it is so buggy on Photoshop CS4. photoshop and vista just doesnt seem to get along... last year i bought photoshop CS3, installed it on my laptop(vista)
View 3 Replies View RelatedI've been trying the trial of CS3, and I'm encountering major performance issues which I can't fathom.
At first I tried it on my old machine, which was good for its time, but perhaps getting a little dated.
I built a new computer just last week, which is very powerful (Intel Core 2 Duo E8400; GeIL 4GB 1066MHz memory; Nvidia GTX 260) and CS3 performance is even worse than it was on my old machine.
Simply moving the mouse around on screen results in horrendous lag (the screen flashes each time this happens) to the point where it's so frustrating to use that I close the program. It generally runs fine; it opens and loads files and does its thing without any problems, and I've certainly noticed a big increase in performance when opening massive files, but moving the actual curser around the screen is an absolute nightmare, which results in general use being a nightmare. Zooming in and out with the scroll-wheel makes the whole screen flash too.
I haven't got a clue what's causing this, as people I know who use CS3 haven't encountered the problem. CS2 runs like a dream.
The OS I was using on my old machine was XP (32 bit), while I'm now using Vista 64.
I am having trouble with my tool cursors. Sometimes the crop tool changes to a crosshair and every brush size will only produce a small crosshhair cursor. This makes it impossible to see the area being worked on.
Rebooting fixes things for a very short time. Deleting preferences didn't work. And even a reinstall went bad after a few hours work. I have a P4 2.8GH processor and 1 gig RAM on XP Pro. Shouldn't those resources be sufficient to handle things?
creating some effects with an image, I've done something inadvertantly that has made my erase and brush cursor into a crosshair looking thing.,.. the sizing keys ([) (]) have no effect on it... no circle that grows and shinks when pressing left and right bracket. Checking at Edit/preferences/cursors... I see default setting I think:Painting Cursors=Normal Brush tipOther=standard
View 3 Replies View RelatedHow do I get an icon for Photoshop? I downloaded it four hours ago but did not get an icon on the desktop for it. I downloaded Lightroom as well and it placed an icon on the desk top.
View 1 Replies View RelatedAm currently working on a web-based application for which I need icons (preferably 16*16 or 24*24 max).
View 1 Replies View Relatedwith the theme of icons I need to create. I am hoping to develop of theme of racing icons (similar to the Window Icons) but can't seem to find anything on the net. Anything similar (football, baseball, whatever) would be fine as long as it provided me with information on shading and perspective. I am hoping to create these small little icons for my Tony Stewart Fansite. While I would rather do and learn everything myself if nothing can be found I could venture out of pocket assuming it isn't too costly.
View 3 Replies View RelatedI don't know if anyone else would be interested, but here's an icon I created for my desktop as a shortcut to the forum.
View 1 Replies View RelatedDouble cursor issue in CS5/6?
Â
As I enlarge my cursor (for brushes, healing tools, whatever) at some undetermined point (different for all pictures) suddenly another cursor appears in the top left corner of CS5/CS6.The cursor is a duplicate of the cursor I am working with, stays in the top left corner of the app, and enlarges and shrinks as I scroll my mouse wheel up and down or use the [ and ] keys or however I enlarge and shrink my cursor.
Â
I have tried the desktop 99% thing, it doesn't work.
I have tried Graphics Card on and off, it doesn't work
I have tried wiping out my settings and starting from scratch, it doesn't work
I installed CS6 over my CS5, it doesn't work
I have tried everything along these lines and nothing is working!
[URL] .....
how to get the cursor to stop disappearing in pscs6 both on tablet and mouse.
View 3 Replies View RelatedI am running Mountain Lion on an older iMac (2007) 4 gb ram, and newer (2011) Macbook Pro with 8 gb of ram. Cursor disappears and will not comeback without click in finder or another program.
View 30 Replies View Relatedi don't have a normal cursor, which in my case is an arrow. instead i have what looks like three tiny hands in a row. this makes it very difficult to be accurate when cropping, or tilting. i uninstalled and reinstalled, to no avail. i'm using cs4 extended
View 2 Replies View RelatedI'm still playing around with CS-2 on the Mac and have got a question about adjusting how much the cursor will move, can't seem to find a place to adjust it.
I had cut out an object from one photo and was trying to place it on another photo. However it dosn't seem to want to move exactly to the place I would like to put it. The increments seem to be large when I try to move it around.
I use Photoshop CS4, Vista OS, 8 GB Rab, 1 TB Diskspace, nad Nvidia Video Card. Recently I have noticed I get DOUBLE CUSERS when I use certain tools such as; the Move, Crop, Eye dropper, Stamp, Pen, Arrows, Hand, Zoom, Color Picker Eye Dropper. So far I have done the followings; downloaded the latest video card driver, uninstalled and reinstalled PS, downloaded updates for PS, downloaded uptates for Vista. I have checked the preferrances and they are OK. I have contacted the Photoshop's teck people several times and they have not been able to help.
View 3 Replies View RelatedSometimes when I'm working with Photoshop CS2 all of the sudden my cursor disappears! (This can occur with brushtool, ellipse tool, etc)
Well.. It's not totally gone; It's just invisible above the window I'm working in. When I put it on my toolbar for example it's there. And when I want to put it above my canvas it disappears again. When I try to draw something anyway, it gives some sort of very thin line which kind of shows what I'm doing, but as soon as I release the mouse button it all disappears again. Closing/opening Photoshop or rebooting the computer don't help.
cursor locking in photoshop, ie you are able to select items from the toolbox but the cursor doesnt change from a pointed arrow. To say a text cursor. You can move layers around the screen with the keyboard but not with the mouse.
This happens about 10 mins into using photoshop and I have to restart photoshop for it to become "unlocked"
When I am using tools such as Eraser, Brush, or etc. it displays the Precise cursor and not the shape of the brush tip. I never understood why this happens. I haven't been able to catch on as to what I've done previously to cause this. I've tried going to Edit>Preferences>Display&Cursors but that is set to Normal Brush tip. Any ideas?
View 5 Replies View Related