Photoshop :: Cursor Moving Too Far
Jul 25, 2005
I'm still playing around with CS-2 on the Mac and have got a question about adjusting how much the cursor will move, can't seem to find a place to adjust it.
I had cut out an object from one photo and was trying to place it on another photo. However it dosn't seem to want to move exactly to the place I would like to put it. The increments seem to be large when I try to move it around.
View 6 Replies
ADVERTISEMENT
Oct 16, 2012
I am a photographer and am using CS5 for image manipulation . I have recently bought a Lenovo Ideapad to use for editing but it seems to have an issue with the space bar shortcut. As soon as I press the space bar, the cursor will not move, I cannot click, not right click. If I plug in a USB Mouse, it will work fine.
Obviously most of the time I will be using a mouse, but it is most frustrating when I'm using the scratch pad and cannot pan around the image. I have checked through all the settings I can find regarding the scratch pad.
View 1 Replies
View Related
Oct 10, 2008
I am not seeing any writing or drawing when using brushes. The cursor moves around the page, but doesn't leave a mark.
View 3 Replies
View Related
Apr 25, 2012
sometimes (there is no rule) when i'm opening a Color Picker window and moving cursor on the palette - my internet browser opens Adobe site.When i try to get back to PS it immediately starts another tab, and another it takes less than 1 second..
View 4 Replies
View Related
Aug 1, 2013
I have a layer I'm resizing and is currently in Transform.When I beging to drag the layer to position while it is in resize the center reference point will jump to my mouse causing me to move the reference point outside of the tranform layer. Normally I would have to click on the reference point and drag it intentionally or hold CTRL and click in the transformed layer to set a reference point, but it since CS6 is had still remainded in CC.
Â
This happens when I transform the layer (Ctrl+T) and then grab the layer to move. I have to put the reference point back to center via mouse or by the reference point on the menu bar up top. Then I can go back and drag my later where I need it to finish my transform.
View 2 Replies
View Related
Mar 19, 2012
New to CAD, so probably typical newby problem. When I try to draw (in Nanocad, since it's the only one I can afford) I don't see what I'm doing, i.e. the lines and figures keep disappearing when I move the cursor. Trying again I see my drawings very briefly and then they're gone again. Tried all and every button, menu etc. and hardware is okay.
View 7 Replies
View Related
Feb 4, 2012
Multiple times, when I have been working in a file, my cursor can no longer move smoothly over the drawing space. Istead, it moves as if it was in a grid and I can not move the cursor freely. The grid view is off so that is not the problem.
View 2 Replies
View Related
Sep 17, 2013
When I move my mouse over my image the brush cursor is not moving and it will not let me click on my image (with the mouse) the crosshair/cursor will follow it, however the brush will not, nor will any other tools, my wacom tablet however works fine.
I thought it must be something to do with GIMP accepting input but its not going as of yet.
View 2 Replies
View Related
Sep 20, 2012
I use tabs in my document for indentation. When my cursor is at the beginning of a line, and I use the up/down keys, the cursor always jumps to the end of the first tab.
Â
This only happens in tab-indent, not space-indent.
Â
Is this supposed to be a "feature"? How can I make it stay at the same cursor position when navigating with arrow keys?
View 2 Replies
View Related
Mar 22, 2012
I want to select part of an image with just one layer. Say I just flattened the image and have to move one part of. I select it with the rectangular select tool. It seems intuitive that I could then just move what I selected, but when I drag the selection, the selection itself moves without moving what is inside the selection.
If I then remember to click the move tool and try to move what's in the selection (seems to work sometimes, maybe when there's multiple layers?) the entire image moves.
The only way I can move part of the image over is if I make a selection and then cut it (ctrl X) then paste it.
How am I supposed to move part of the flattened image, is there a way I can set it to default to "When I select something, I can immediately drag that selected area around."
View 1 Replies
View Related
Dec 14, 2012
My cursor appears and disappears while in GIMP as I move the cursor over the canvas. I can make the cursor appear but only if there is no movement of the cursor. It makes no difference which tool I select, the size of the canvas, or the level of zoom.
Please note that this only occurs in Gimp, and none of my other applications. It started when I upgraded from openSUSE 12.1 to 12.2. I'm assuming that it has something to do with my input device configuration, but I could be totally wrong.
I have a total of 3 input devices - Core Pointer, Logitech USB-PS/2 Optical Mouse, and Virtual Core XTEST Pointer. Both the Optical Mouse and XTEST Pointer are DISABLED. Core Pointer is the only one enabled. Enabling Optical Mouse and XTEST Pointer give me other problems in Gimp and need to remain disabled.
For the Core Pointer, Mode is set to SCREEN, a message says that 'The axis X has no curve', and the following Axis Settings:
X 1
Y 2
Pressure none
xtilt none
ytilt none
wheel none
In Gimp Preferences->Input Controllers, there are three active controllers - Mouse Buttons, Main Mouse Wheel, and Main Keyboard.
OS: Linux 3.4.11-2.16-desktop i686
System: openSUSE 12.2 (i586)
KDE: 4.8.5 (4.8.5) "release 2"
Display Info:
Vendor: Intel Corporation
Model: G33
2D driver: intel
3D driver: Unknown Gallium (9.0.1)
View 3 Replies
View Related
Feb 27, 2014
In Xcode, we have to define cursor as:
Â
resource 'CURS' (16001) {
   $"00 00 00 00"
   $"18 00 3C 00"
   $"1E 00 0F 00"
   $"07 80 03 C8"
   $"01 E8 00 FC"
[Code]...
Â
In Windows we use .cur file, simpler.
Â
I want to convert .cur file to the mac format above, how?
View 1 Replies
View Related
Apr 6, 2009
Photoshop CS3 and have stumbled across a bit of a problem. It seems that I have managed to lock my Photoshop file from all editing as I am unable to use any tool apart from the Hand Tool.
View 6 Replies
View Related
Aug 19, 2003
how to prevent photoshop from automatically changing cursors from BRUSH SIZE to the precise?.
I've tried the reset but it does not work.
View 5 Replies
View Related
Apr 26, 2009
i downloaded the trial version of Photoshop CS4, and as soon as i installed it i had this problem. when i use the tablet, it would be fine and prefectly responsive however, if i walk away from the laptop for about 20secs or more, i just cant seem to get any response on photoshop when i use the tableti am not sure what is the real cause of the problem but its a constant annoyance, and the only way i can solve it, is to exit photoshop, and start it up again.only to have the same thing occur if i pause to do something else or alt+tab to check my email or whatever... i can confirm that theres nothing wrong with my tablet as it works for my other programs like Manga Studio EX or MS paint(lol)so i have NO idea why it is so buggy on Photoshop CS4. photoshop and vista just doesnt seem to get along... last year i bought photoshop CS3, installed it on my laptop(vista)
View 3 Replies
View Related
Sep 2, 2008
I've been trying the trial of CS3, and I'm encountering major performance issues which I can't fathom.
At first I tried it on my old machine, which was good for its time, but perhaps getting a little dated.
I built a new computer just last week, which is very powerful (Intel Core 2 Duo E8400; GeIL 4GB 1066MHz memory; Nvidia GTX 260) and CS3 performance is even worse than it was on my old machine.
Simply moving the mouse around on screen results in horrendous lag (the screen flashes each time this happens) to the point where it's so frustrating to use that I close the program. It generally runs fine; it opens and loads files and does its thing without any problems, and I've certainly noticed a big increase in performance when opening massive files, but moving the actual curser around the screen is an absolute nightmare, which results in general use being a nightmare. Zooming in and out with the scroll-wheel makes the whole screen flash too.
I haven't got a clue what's causing this, as people I know who use CS3 haven't encountered the problem. CS2 runs like a dream.
The OS I was using on my old machine was XP (32 bit), while I'm now using Vista 64.
View 3 Replies
View Related
Jul 9, 2005
I am having trouble with my tool cursors. Sometimes the crop tool changes to a crosshair and every brush size will only produce a small crosshhair cursor. This makes it impossible to see the area being worked on.
Rebooting fixes things for a very short time. Deleting preferences didn't work. And even a reinstall went bad after a few hours work. I have a P4 2.8GH processor and 1 gig RAM on XP Pro. Shouldn't those resources be sufficient to handle things?
View 8 Replies
View Related
Apr 21, 2009
creating some effects with an image, I've done something inadvertantly that has made my erase and brush cursor into a crosshair looking thing.,.. the sizing keys ([) (]) have no effect on it... no circle that grows and shinks when pressing left and right bracket. Checking at Edit/preferences/cursors... I see default setting I think:Painting Cursors=Normal Brush tipOther=standard
View 3 Replies
View Related
Jun 6, 2013
Double cursor issue in CS5/6?
Â
As I enlarge my cursor (for brushes, healing tools, whatever) at some undetermined point (different for all pictures) suddenly another cursor appears in the top left corner of CS5/CS6.The cursor is a duplicate of the cursor I am working with, stays in the top left corner of the app, and enlarges and shrinks as I scroll my mouse wheel up and down or use the [ and ] keys or however I enlarge and shrink my cursor.
Â
I have tried the desktop 99% thing, it doesn't work.
I have tried Graphics Card on and off, it doesn't work
I have tried wiping out my settings and starting from scratch, it doesn't work
I installed CS6 over my CS5, it doesn't work
I have tried everything along these lines and nothing is working!
[URL] .....
View 1 Replies
View Related
Oct 9, 2013
how to get the cursor to stop disappearing in pscs6 both on tablet and mouse.
View 3 Replies
View Related
Sep 23, 2012
I am running Mountain Lion on an older iMac (2007) 4 gb ram, and newer (2011) Macbook Pro with 8 gb of ram. Cursor disappears and will not comeback without click in finder or another program.
View 30 Replies
View Related
Oct 5, 2013
i don't have a normal cursor, which in my case is an arrow. instead i have what looks like three tiny hands in a row. this makes it very difficult to be accurate when cropping, or tilting. i uninstalled and reinstalled, to no avail. i'm using cs4 extended
View 2 Replies
View Related
Jul 19, 2009
I use Photoshop CS4, Vista OS, 8 GB Rab, 1 TB Diskspace, nad Nvidia Video Card. Recently I have noticed I get DOUBLE CUSERS when I use certain tools such as; the Move, Crop, Eye dropper, Stamp, Pen, Arrows, Hand, Zoom, Color Picker Eye Dropper. So far I have done the followings; downloaded the latest video card driver, uninstalled and reinstalled PS, downloaded updates for PS, downloaded uptates for Vista. I have checked the preferrances and they are OK. I have contacted the Photoshop's teck people several times and they have not been able to help.
View 3 Replies
View Related
Sep 19, 2007
Sometimes when I'm working with Photoshop CS2 all of the sudden my cursor disappears! (This can occur with brushtool, ellipse tool, etc)
Well.. It's not totally gone; It's just invisible above the window I'm working in. When I put it on my toolbar for example it's there. And when I want to put it above my canvas it disappears again. When I try to draw something anyway, it gives some sort of very thin line which kind of shows what I'm doing, but as soon as I release the mouse button it all disappears again. Closing/opening Photoshop or rebooting the computer don't help.
View 1 Replies
View Related
Jan 11, 2005
cursor locking in photoshop, ie you are able to select items from the toolbox but the cursor doesnt change from a pointed arrow. To say a text cursor. You can move layers around the screen with the keyboard but not with the mouse.
This happens about 10 mins into using photoshop and I have to restart photoshop for it to become "unlocked"
View 1 Replies
View Related
Mar 22, 2006
When I am using tools such as Eraser, Brush, or etc. it displays the Precise cursor and not the shape of the brush tip. I never understood why this happens. I haven't been able to catch on as to what I've done previously to cause this. I've tried going to Edit>Preferences>Display&Cursors but that is set to Normal Brush tip. Any ideas?
View 5 Replies
View Related
Apr 23, 2009
eraser cursor…. When it circle’s size is small, it the whole outline shows up. But as I zoom in, or expand the cursor size part of it disappears and gets to the point where only about 25% of it is left visible.
View 4 Replies
View Related
Nov 5, 2008
I mean any shape outline when using things like brush, blur, erase. If the cursor size is very small, say less that 60 pixels, the whole shape is visible. Let's just say it's a circle, if it get's any bigger it starts to disappear as the size goes up. All that will be left is a small line showing the very top left of the circle.
This is a nuisance, especially for custom brushes where I can't see where the brush will be placed.
View 3 Replies
View Related
Jun 15, 2005
I've been playing around with PS for over 18 months and I've never had this happen. My cursor changed to cross hairs and will not change back. Even when I pick a brush that should be round like the Clone Stamp Tool, Eraser, Healing brush etc. I thought maybe my Preferences got corrupted and checked there but nada.
View 3 Replies
View Related
Dec 4, 2007
I'm having a flickering cursor on my CS3 photoshop. This is version 10.0. It disables some functions in PS. I can't type anything in the top bar fields.
View 20 Replies
View Related
Feb 26, 2009
having installed PS CS4, my brush cursor can be as big as possible or as small as poaaible and all I see is a small x regardless. I checked the preferences for cursors and they appear correct.
View 6 Replies
View Related