Photoshop :: Space Bar Stops Cursor Moving
Oct 16, 2012
I am a photographer and am using CS5 for image manipulation . I have recently bought a Lenovo Ideapad to use for editing but it seems to have an issue with the space bar shortcut. As soon as I press the space bar, the cursor will not move, I cannot click, not right click. If I plug in a USB Mouse, it will work fine.
Obviously most of the time I will be using a mouse, but it is most frustrating when I'm using the scratch pad and cannot pan around the image. I have checked through all the settings I can find regarding the scratch pad.
View 1 Replies
ADVERTISEMENT
Jul 25, 2005
I'm still playing around with CS-2 on the Mac and have got a question about adjusting how much the cursor will move, can't seem to find a place to adjust it.
I had cut out an object from one photo and was trying to place it on another photo. However it dosn't seem to want to move exactly to the place I would like to put it. The increments seem to be large when I try to move it around.
View 6 Replies
View Related
Oct 10, 2008
I am not seeing any writing or drawing when using brushes. The cursor moves around the page, but doesn't leave a mark.
View 3 Replies
View Related
Jun 30, 2012
I am animating comps in After Effects CS6, and I'm quickly moving objects across the screen using positioning keyframes and changing size using scaling keyframes. Most of the time it works great; but sometimes the motion blur effect keeps appearing *after* the object has stopped moving. Not just for a second -- but forever. It appears correct when scrubbing on the timeline, but when I render the final output movie, a non-moving object sometimes has motion blur all over it.
Sometimes I can fix it by un-parenting some layers inside the comp... other times it doesn't fix it. Sometimes I just delete it and start over and it works. Seems more like a bug then something I'm doing wrong.
I also tried on my Mac Pro tower and Macbook Pro laptop in case it was a graphics card issue; it isn't, the exact same problem manifests itself in both areas. I did just discover that turning continuous raster OFF does seem to fix the problem--but then my vector images are blurry when I zoom in... and that again sounds more like a bug, not like an incorrect setting.
View 11 Replies
View Related
Apr 25, 2012
sometimes (there is no rule) when i'm opening a Color Picker window and moving cursor on the palette - my internet browser opens Adobe site.When i try to get back to PS it immediately starts another tab, and another it takes less than 1 second..
View 4 Replies
View Related
Aug 1, 2013
I have a layer I'm resizing and is currently in Transform.When I beging to drag the layer to position while it is in resize the center reference point will jump to my mouse causing me to move the reference point outside of the tranform layer. Normally I would have to click on the reference point and drag it intentionally or hold CTRL and click in the transformed layer to set a reference point, but it since CS6 is had still remainded in CC.
This happens when I transform the layer (Ctrl+T) and then grab the layer to move. I have to put the reference point back to center via mouse or by the reference point on the menu bar up top. Then I can go back and drag my later where I need it to finish my transform.
View 2 Replies
View Related
Mar 19, 2012
New to CAD, so probably typical newby problem. When I try to draw (in Nanocad, since it's the only one I can afford) I don't see what I'm doing, i.e. the lines and figures keep disappearing when I move the cursor. Trying again I see my drawings very briefly and then they're gone again. Tried all and every button, menu etc. and hardware is okay.
View 7 Replies
View Related
Feb 4, 2012
Multiple times, when I have been working in a file, my cursor can no longer move smoothly over the drawing space. Istead, it moves as if it was in a grid and I can not move the cursor freely. The grid view is off so that is not the problem.
View 2 Replies
View Related
May 14, 2012
MEP 2013 My cursor keeps disappearing while in paper space. The cursor is visible when selecting commands...but while in the view window, it disappears..
View 3 Replies
View Related
Sep 17, 2013
When I move my mouse over my image the brush cursor is not moving and it will not let me click on my image (with the mouse) the crosshair/cursor will follow it, however the brush will not, nor will any other tools, my wacom tablet however works fine.
I thought it must be something to do with GIMP accepting input but its not going as of yet.
View 2 Replies
View Related
Sep 20, 2012
I use tabs in my document for indentation. When my cursor is at the beginning of a line, and I use the up/down keys, the cursor always jumps to the end of the first tab.
This only happens in tab-indent, not space-indent.
Is this supposed to be a "feature"? How can I make it stay at the same cursor position when navigating with arrow keys?
View 2 Replies
View Related
Sep 18, 2012
If you're an Illustrator user, you may be familiar with the ability to move the active anchor point of the line, by holding "Spacebar" and dragging during the drawing process. This is a useful timesaver for creating complex paths. While Photoshop CS6 has introduced some useful new path-editing features, this is one that is still missing.
I cant' figure out why Adobe does not make the pen tool identical between the two programs. This is an old feature in Illustrator. Don't the Adobe programmers talk to each other.
View 2 Replies
View Related
Jan 2, 2012
I am trying to export geometry found in a flat pattern sketch overlaid onto the flat pattern.
Since I am creating the output file manually I gather the flat pattern boundaries and bend center lines for output to a file.
When I add flat pattern sketch entities to the mix they do not overlay properly. What matrix would I have to push the sketch entities through to get them to the same coordinates as the flat pattern?
View 1 Replies
View Related
Apr 2, 2012
We have until now always used Model Space for drawings and really with LT and the type of drawings we create this was fine.
I have started to look at Paper space solely to utilize the sheet set manager in 2012 for printing and immediately felt like I was back on my 1st day I ever looked at AutoCad! I found several tutorials online and at AU, but still stuck on a few things that hopefully regular paper space users will have no trouble in answering:-
I thought the most simple start would be to take a dwg with everything in Model space and create a layout with 1 viewport. (for now even the title block can stay in model space and I will start adding fields later if I can work this out)
So I used page setup manager to prepare my layout for A1, which it gave me dims of 594 x 841 for the printable area. I created a viewport that was the same size and used properties box to centre it, but it doesnt centre it on the layout and when i print it doesn't show the right and top edges of the viewport? Is there an easy way to centre it exactly to the printable area?
Once created is there a way to use co-ordinates to get the right view in the viewport. Say if all our drawings started at 0,0 bottom left in model space can i tell the viewport to look at 0,0 and the top right co-ordinate of the drawing at the scale I want?
View 9 Replies
View Related
Sep 10, 2013
I have alot of text oriented in various Layout Viewports. Unfortunately the consultant I am working with failed to mention that his software uses only model space. All of my measurements are orieneted on a Single Layer titled "Noise" in various layouts I was wondering if there was a quick way to take this layer and orient all of this data to model space??
View 5 Replies
View Related
Mar 12, 2012
When I drop a profile into model space, what happens when I move it? Like if I have ten different profiles, I'd like to square them all up and organize them to fit neatly into my plan views. I just scale my border drawing and drop one of those into model space, then fill it up with profiles until it's full.
I know that I should be working in layout/paper space for this kind of stuff, but this seems easy enough.
View 3 Replies
View Related
Jun 24, 2011
I used an example to represent a more complex animation that I am working on. Basically I have a block moving in vertex space because it is morphing.A proboolean cut has been applied to the block with a diamond shaped object, so that as the block morphs through space, it is being cut by the boolean operand (diamond shape object).
However, I want to achieve an outcome that when the object moves through the boolean cutting operand, whatever geometry that has been cut, stays cut and removed. So in a way, the boolean cut operand object acts as a "geometry eraser". Obvioulsy I would like to be able to control this behaviour too (soft selection, animating boolean cutting operand).
Is this achievable? Or do I have to look at another set of tools/modifiers?
View 4 Replies
View Related
Oct 8, 2012
I am trying to find a way to programmatically move our AutoCAD room tag attribute data to new AEC space property sets. I work in a hospital that has approx. 1 million s.f. and over 3000 rooms. Obviously a daunting task to do room by room.
View 4 Replies
View Related
Jul 26, 2013
I'm using Autocad 2010, and have never had this problem before. Working in plan, the traced linework over 2 xref pdfs (both on locked layers) keeps moving in model space either when I'm performing another command on different linework or when I regen. The layers that keep moving are all locked, and do the same when they're frozen. There is no consistency to where they move--usually within the same screen view--so it makes me wonder whether I xrefed these files into a different plane? They're not georeferenced though.
Or is this just a bug? I thought the file may be corrupted so started a new one, still same issue.
View 3 Replies
View Related
Mar 22, 2012
I want to select part of an image with just one layer. Say I just flattened the image and have to move one part of. I select it with the rectangular select tool. It seems intuitive that I could then just move what I selected, but when I drag the selection, the selection itself moves without moving what is inside the selection.
If I then remember to click the move tool and try to move what's in the selection (seems to work sometimes, maybe when there's multiple layers?) the entire image moves.
The only way I can move part of the image over is if I make a selection and then cut it (ctrl X) then paste it.
How am I supposed to move part of the flattened image, is there a way I can set it to default to "When I select something, I can immediately drag that selected area around."
View 1 Replies
View Related
Dec 14, 2012
My cursor appears and disappears while in GIMP as I move the cursor over the canvas. I can make the cursor appear but only if there is no movement of the cursor. It makes no difference which tool I select, the size of the canvas, or the level of zoom.
Please note that this only occurs in Gimp, and none of my other applications. It started when I upgraded from openSUSE 12.1 to 12.2. I'm assuming that it has something to do with my input device configuration, but I could be totally wrong.
I have a total of 3 input devices - Core Pointer, Logitech USB-PS/2 Optical Mouse, and Virtual Core XTEST Pointer. Both the Optical Mouse and XTEST Pointer are DISABLED. Core Pointer is the only one enabled. Enabling Optical Mouse and XTEST Pointer give me other problems in Gimp and need to remain disabled.
For the Core Pointer, Mode is set to SCREEN, a message says that 'The axis X has no curve', and the following Axis Settings:
X 1
Y 2
Pressure none
xtilt none
ytilt none
wheel none
In Gimp Preferences->Input Controllers, there are three active controllers - Mouse Buttons, Main Mouse Wheel, and Main Keyboard.
OS: Linux 3.4.11-2.16-desktop i686
System: openSUSE 12.2 (i586)
KDE: 4.8.5 (4.8.5) "release 2"
Display Info:
Vendor: Intel Corporation
Model: G33
2D driver: intel
3D driver: Unknown Gallium (9.0.1)
View 3 Replies
View Related
Feb 27, 2014
In Xcode, we have to define cursor as:
resource 'CURS' (16001) {
$"00 00 00 00"
$"18 00 3C 00"
$"1E 00 0F 00"
$"07 80 03 C8"
$"01 E8 00 FC"
[Code]...
In Windows we use .cur file, simpler.
I want to convert .cur file to the mac format above, how?
View 1 Replies
View Related
May 15, 2010
Today, all of a sudden, two of my most used functions—holding down the space bar to move the image around and holding down CMD-space bar to zoom—just up and quit on me (I do like the "Scrubby" but it took a little getting used to. It's very touch screen-esque).
I did all of the normal trouble shooting such as deleting the prefs, relaunching, restarting, etc. Nothing. The functions work fine in the other CS5 programs.
I checked through all of the prefs thinking that perhaps I accidentally changed something but I couldn't find anything. If all else fails, I'll do an uninstall/reinstall but only as a last resort.
I did notice that Adobe finally fixed the Distort (in Full Screen Mode) bug that was killing me in CS4.
View 89 Replies
View Related
Apr 4, 2012
[URL] Bug is where the Hand move (by holding down Space bar and dragging) stops working. Issue appears to be a conflict with web browsers.
This bug is still present in Photoshop version 12.1 (CS 5). I don't use Firefox, I use Safari and Chrome. Quitting Safari did not fix the problem. Quitting Chrome DID fix the problem.
View 1 Replies
View Related
Aug 3, 2003
What is the difference between Adobe RGB(1998) working space, and CIE Lab space?
View 3 Replies
View Related
Jan 3, 2013
I tried to install Photoshop CS6. I used the Adobe Download Assistant. During first try of installation my battery of the notebook broke down - I accidentally forgot the charger..When I try now again an installation the Download part with the Assistant works fine but during installation the process does not continue anymore after this step ..The "progress-bar" of this dialog completes but after this nothing happens.
I tried this several times.I also tried to clean the registry (Ccleaner) - no success.
My notebook:
Acer Aspire 5920G
Win7 32bit
Photoshop CS6 via Adobe Dowload Assistant
View 2 Replies
View Related
Jul 11, 2013
I got a Problem the Installation of Photoshop CC stop at 64 % . But why?
View 3 Replies
View Related
Oct 30, 2013
System Information
Windows 8 x64
AOC 2243fW 1920x1080 monitor (x2)
Processor: Intel Core i3 2120 3.40GHz (Dual Core)
Ram: 6GB
GPU: nVidia geForce GTX 760 TI 2GB DDR5
Notes:
Photoshop is up to date.
Performance settings in photoshop are set correctly.
Monitor Profiles are not defective.
Images/Files are not corrupted.
Issue:
After a fresh restart of my PC Photoshop will function as normal for a short while (1hr appx.) after that it ceases to import/export or do any of it's intended functions. I CANNOT import ANY files. I am not presented with any error messages and it simply doesn't work. Buttons appear to highlight and the toolbars are still accessible, however I cannot continue with my work. If I then restart my computer it will function for a short while again then this will happen.
Things I have done:
Reinstalled Photoshop CS6
Deleted Preferences (Multiple Times)
Contacted Adobe Support in which case they failed to fix the problem.
View 3 Replies
View Related
Feb 9, 2009
after a serious virus attack Photoshop CS4 stops loading at message "Measuring Memory".
View 5 Replies
View Related
Apr 12, 2013
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
View 9 Replies
View Related
Oct 5, 2013
Lisp that would permit Toggling from Paper Space into the same zoomed area within Model Space and vice versa.
View 3 Replies
View Related
